Panasonic Kx-Td816c, Kx-td1232c Digital Super Hybrid System User Manual

							Station Features and Operation (DPT/SLT)
User Manual211
Switching the mode (Display operation)
Switching Day/Night mode (Display operation)
Hang up or press
SP-PHONE.
Night Mode Day Mode
Enter the desired mode
number (0 to 3).
0
1
Press MODEuntil
Feature Access
is displayed.Rotate Jog Dialuntil
Night Mode is displayed.Press SELECT.
Confirmation tone  
MODE
 The display shows the current mode. 
Night Mode 0-3→SELECT
MODE
7431
Break Mode Lunch Mode
2
3
Hang up or press
SP-PHONE.
Press SHIFT
until “FEAT”is
displayed.Press FEAT.
Rotate Jog Dialuntil
“Night Mode” is at the
arrow.Press SEL.
Confirmation tone  
SHIFTFEAT
Night Mode   0-3
OGM Play     1-4
MENU →
SEL
7433 
Night Mode Day Mode
Enter the desired mode
number (0 to 3).
0
1
 The display shows the current mode. 
Break Mode Lunch Mode
2
3 
						

							Station Features and Operation (DPT/SLT)
212User Manual
Switching Day/Night mode (Night button operation)
Switching Day/Night modes (Feature number operation)
Confirming the current mode
PT
Lift the handset or press
SP-PHONE/MONITOR.Hang up or press
SP-PHONE/MONITOR. Confirmation tone
and dial tonePress Night
(flexible button).
(Night)
The status of Night indicator.
Day mode
Night modeOff 
On (Red)
The display shows the current mode.
Any Telephone
Lift the handset
or press 
SP-PHONE/MONITOR.Confirmation
tone Dial 78.
Day Mode
Night Mode
87
0
1
2
3
Lunch Mode
Break Mode
Enter the desired mode
number (0 to 3).
Hang up or press
SP-PHONE/MONITOR.
The display shows the current mode. 
Display PT
Press #.
When the telephone is idle;
The display shows the current mode for three seconds. 
						

							Station Features and Operation (DPT/SLT)
User Manual213
Conditions
The following items have separate day and night programming.
a)Outgoing Permitted Outside Line Assignment
b)Direct In Lines (DIL)
c)Doorphone Ringing Assignment
d)Extension Ringing Assignment
e)Ringing, Delayed
f)Toll Restriction Level
g)Direct Inward Dialing (DID)
h)Intercept Routing
i)Outgoing Permitted Outside Line Assignment for ISDN Extension
In the lunch/break mode, only the DIL 1:1 destination of [457-458] is effective; if it is not 
assigned, DIL 1:1 (Day)/DIL 1:N (Day) perform in the day mode as usual. Using feature 
numbers, you can go from day mode to any other mode. However, from night mode, you 
can only go to day mode.
Class of Service 
Class of Service programming determines the extensions that can perform this feature. 
The Day/Lunch/Break/Night mode is automatically switched at a predetermined time 
(default: 9:00 a.m. for all days of the week; 12:00 p.m – 12:59 p.m for lunch;
3:00 p.m – 3:29 p.m for break; 5:00 p.m. for all nights of the week) if automatic switching 
mode is selected in System Programming.

A flexible CO and DSS button can be assigned as the Night button.
Programming Guide References
[101] Day / Night Service Switching Mode
[102] Day / Night Service Starting Time
[150] Lunch Service Starting / Ending Time
[151] Break Service Starting / Ending Time
[457-458] DIL 1:1 — Lunch / Break Group
[510] Night Service Access
[620] Lunch / Break Group Assignment
Features Guide References
Direct Inward Dialing (DID)
Direct In Lines (DIL)
Intercept Routing
Lunch / Break Service
Night Service
Outside Line Connection Assignment — Outgoing 
						

							Station Features and Operation (DPT/SLT)
214User Manual
Ringing, Delayed 
Toll Restriction
Integrated Services Digital Network (ISDN)
User Manual Reference
2.2.2 Flexible Button Assignment
4.3.37 Doorphone Call
4.5.9 KX-T7235 Display Features - System Feature Access Menu
4.5.12 KX-T7431 / KX-T7433 / KX-T7436 Display Features - System Feature Access Menu 
						

							Station Features and Operation (DPT/SLT)
User Manual215
4.3.56 Off-Hook Call Announcement (OHCA)
Allows you to signal a busy extension on a handset call that your call is waiting. Your voice is 
heard through the built-in speaker of the called partys PT (KX-T7235 or KX-T7436). The 
called extension user can select to talk to you or their initial caller.
Setting
Canceling
Executing
Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE.Confirmation tone 
and dial toneDial 7312.
7312

Call Waiting 2
7235 / 7436
7235 / 7436
Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE.Confirmation tone 
and dial tone Dial 7310.
3710

Call Waiting Off
7230 / 7235 / 7433 / 7436
BSS
S1S2S3
Press BSS (S1). Confirmation toneWait for an
answer and talk.
If you hear a busy tone after making an intercom call; 
						

							Station Features and Operation (DPT/SLT)
216User Manual
Executing
To talk to the third party
Any Telephone
Dial 1.
If you hear a busy tone after making an intercom call;
Confirmation tone
1
Wait for an
answer and talk.
If OHCA is activated by the other party when you are engaged in a call using the handset, you
hear a confirmation tone and then the callers voice through the built-in speaker of your PT.
Speak with the third 
party through microphone.
The caller s number or name is shown on the display for    
five seconds in 10 seconds intervals.

Caller s extension number
You can talk to two parties individually.
123: Tony
7235 / 7436 
						

							Station Features and Operation (DPT/SLT)
User Manual217
To talk to the third party by terminating the current call in hands-free mode
To talk to the third party after placing the current call on hold
If OHCA is activated by the other party when you are engaged in a call using the handset, you
hear a confirmation tone and then the callers voice through the built-in speaker of your PT.
Speak with the third 
party through microphone.
You can talk in hands-free
mode.The current call is disconnected.
The INTERCOM indicator light
turns green.
Hang up or press 
SP-PHONE.
7235 / 7436
7235 / 7436
Press HOLD.
Talk.
HOLD
The current call is placed on hold.
The INTERCOM indicator light flashes green slowly.
If OHCA is activated by the other party when you are engaged in a call using the handset, you
hear a confirmation tone and then the callers voice through the built-in speaker of your PT. 
						

							Station Features and Operation (DPT/SLT)
218User Manual
Conditions
BSS / OHCA / Whisper OHCA
If an extension user dials 1 while hearing a busy tone, BSS or OHCA or Whisper OHCA 
will be activated at the called extension.
This is determined by the following conditions.
If Do Not Disturb (DND) feature is set at the called extension, you hear DND tone. In this 
case, to execute OHCA, you must first activate Do Not Disturb (DND) Override feature 
before OHCA is available.
Call Waiting
This feature is only effective if the called extension has set Call Waiting feature. If not, 
you will hear a reorder tone after dialing 1.

This feature works when the other extension is in off-hook status and the INTERCOM 
button is idle/lit in green.
Programming Guide References
[509] Off-Hook Call Announcement (OHCA)
User Manual References
4.3.7 Busy Station Signaling (BSS)
4.3.27 Call Waiting
4.3.57 Off-Hook Call Announcement (OHCA) —Whisper [PT only] Calling extension Called extension
COS-OHCA 
assignmentCall Waiting setting
OFF ON
0123
Disable—BSS BSS BSS
Enable—BSS OHCA
*1BSS
*1OHCA (Off-Hook Call Announcement) is activated when the called extension is KX-T7235 or KX-T7436.
W-OHCA*2
OHCA BSS
*2Whisper OHCA is activated when both calling and called extensions are using one of the KX-T7400 series PT. 
						

							Station Features and Operation (DPT/SLT)
User Manual219
4.3.57 Off-Hook Call Announcement (OHCA) —Whisper [PT only]
This is a version of the OHCA feature. The difference is, OHCA provides two-way 
communication between two extensions but this feature provides one-way communication. 
When this feature is activated, the called party can hear callers voice through the handset but 
the caller cannot hear the called partys voice.
 By default, this feature is available only when both calling and called extensions are using KX-
T7400 series PTs.
Setting
Canceling
Executing
74XX
Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE.Confirmation tone 
and dial toneDial 7313.
7313

Call Waiting 3
74XX
Lift the handset or press 
SP-PHONE.Hang up or press 
SP-PHONE.Confirmation tone 
and dial tone Dial 7310.
3710

Call Waiting Off
7433 / 7436
BSS
S1S2S3
Press BSS (S1).Confirmation toneWait for an
answer and talk.
If you hear a busy tone after making an intercom call; 
						

							Station Features and Operation (DPT/SLT)
220User Manual
Executing
Receiving a voice announcement
To talk to the third party by terminating the current call in hands-free mode
Wait for an
answer and talk.
74XX
Dial 1.
If you hear a busy tone after making an intercom call;
Confirmation tone
1
74XX
If Whisper OHCA is activated by the other party when you are engaged in a call, you hear a
confirmation tone. Then you will be engaged in both calls with the current caller (two-
way) and the third party (one-way).

The callers extension number or name is shown on the
display for five seconds in 10 seconds intervals.
123:Tony
Callers extension number
74XX
If Whisper OHCA is activated by the other party when you are engaged in a call, you hear a
confirmation tone. Then you will be engaged in both calls with the current caller (two-
way) and the third party (one-way).
Hang up.
You can talk in hands-free
mode.The current call is disconnected.
The INTERCOM indicator light
turns green.
Speak with the third 
party through microphone.