OKI MC561dn User Manual

							191 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Network Setup
EPSO
N FX 
SetupFit to Letter Disable Sets the printing mode 
that can fit print data, 
equivalent to 11 inches 
(66 lines), in the letter-
size printable area.
Text Height Same Sets the height of char-
acters.
[
Same]: Regardless of 
CPI, the character 
heights are the same.
[
Diff]: As CPI varies, the 
character heights vary.
Item Default Description
Network 
SetupTCP/IP Enable Disables/ enables 
TCP/IP.
IP Version IPv4 Selects the IP ver-
sion. TCP/IP proto-
col must be 
enabled.
NetBEUI Disable Disables/ enables 
NetBEUI.
NetBIOS over TCP Enable Sets whether to 
enable NetBIOS 
over TCP. Display 
condition: TCP/IP 
protocol is enabled 
and the IP version 
is set to IPv4.
NetWare Disable Disables/ enables 
NetWare.
EtherTalk Disable Disables/ enables 
EtherTalk.
Frame Type Auto Selects a frame 
type. Netware must 
be enabled.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							192 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Network 
SetupIP Address Set Auto Sets the method of 
setting up IP 
address. TCP/IP 
protocol must be 
enabled and the IP 
version set to IPv4.
IPv4 address xxx.xxx.xxx.
xxxSets an IP address.
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
Subnet Mask xxx.xxx.xxx.
xxxSets a subnet 
mask.
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
Gateway Address xxx.xxx.xxx.
xxxSets a gateway 
address.
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
DNS Server (Primary) xxx.xxx.xxx.
xxxSets an IP address 
for primary DNS 
server. 
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
DNS Server (Secondary) xxx.xxx.xxx.
xxxSets an IP address 
for secondary DNS 
server. 
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							193 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Network 
SetupWIN Server (Primary) xxx.xxx.xxx.
xxxSets a name or an 
IP address for the 
WINS server.
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
WIN Server (Secondary) xxx.xxx.xxx.
xxxSets a name or an 
IP address for the 
WINS server.
TCP/IP protocol 
must be enabled 
and the IP version 
set to IPv4.
Web Enable Enables/Disables 
access from a web 
browser. 
TCP/IP protocol 
must be enabled.
Telnet Disable Enables/Disables 
access from the 
Te l n e t .  
TCP/IP protocol 
must be enabled.
FTP Disable Enables/Disables 
access from FTP. 
TCP/IP protocol 
must be enabled.
IPSec Disable This item is dis-
played and can be 
disabled only when 
IPSec is set to 
valid.
SNMP Enable Enables/Disables 
access from SNMP. 
Netware and TCP/
IP must be 
enabled.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							194 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Network 
SetupNetwork Scale Normal [Normal]: the MFP 
works effectively 
even when con-
nected to a HUB 
that has a spanning 
tree feature. How-
ever, printer start 
up time gets longer 
when computers 
are connected to 
two or three small 
LANs.
[
Small]: comput-
ers can cover from 
two or three small 
LANs to a large 
LAN, but it may not 
work effectively 
when it is con-
nected to a HUB 
with a spanning 
tree feature.
HUB Link Setting Auto 
 
NegotiateSets the hub link-
ing method.
Network PS-Protocol RAW Sets a PS protocol.
Fa c t o r y  
DefaultsExecute The settings of the 
network, mail 
server, LDAP 
server, and secure 
protcol server are 
returned to the 
default settings.
Mail 
Server 
SetupSMTP  Server (NULL) Sets the IP address 
or host name for 
the SMTP server.
SMTP Port 25 Sets the port num-
ber. 
 
Range: 1 to 65535
SMTP Encryption None Selects an SMTP 
encryption method.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							195 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Mail 
Server 
SetupPOP3  Server (NULL) Sets the IP address 
or host name for 
the POP3 server.
POP3 Port 110 Sets the POP3 port 
number. 
 
Range: 1 to 65535.
POP Encryption None Selects an encryp-
tion method. or e-
mail transmission.
Authentication method None Sets the certifica-
tion for e-mail 
transmission.
SMTP User ID (NULL) Sets a log-in name 
used for SMTP cer-
tification.
SMTP Password (NULL) Sets a log-in pass-
word used for 
SMTP certification.
POP User ID (NULL) Sets a log-in name 
on the server used 
for POP certification 
or for printing files 
attached to 
received e-mails.
POP Password (NULL) Sets a log-in pass-
word onto the 
server used for POP 
certification or for 
printing files 
attached to 
received e-mails.
LDAP 
Server 
SettingServer 
SettingLDAP Server (NULL) Sets an IP address 
or host name for 
the LDAP server.
Port No. 389 Sets a port num-
ber. Range: 1 to 
65535.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							196 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
LDAP 
Server 
SettingLDAP 
Server 
SettingTimeout 30 seconds Sets the timeout 
value for the 
search response 
from the LDAP 
server. Range 10 to 
120 seconds.
Max. Entries 100 Sets the maximum 
number of search 
results from the 
LDAP server.
Search Root (NULL) Specifies a posi-
tion to start 
searching the LDAP 
directory.
Attribute Name1 cn Specifies an 
attribute used for 
searching. Name2 sn
Name3 givenName
E-mail Address mail
Additional Filter (NULL)
Authen-
ticationMethod Anonymous Sets the certifica-
tion method.
UserID (NULL) Sets a user ID for 
certification of the 
LDAP server. 
 
Maximum 80 char-
acters.
The authentication 
method for LDAP 
cannot be set to 
[Anonymous].
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							197 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
LDAP 
Server 
SettingAuthen-
ticationPassword (NULL) Sets a certification 
password for the 
LDAP server. 
 
Maximum 32 char-
acters.
The authentication 
method for LDAP 
cannot be set to 
[Anonymous].
Encryption None Sets the encryp-
tion of communica-
tion with the LDAP 
server.
Secure 
Print 
Server 
SettingDomain (NULL) Sets a realm name 
for the Kelberos 
certification.
 
Maximum 64 char-
acters.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							198 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Management
Item Default Description
Default Mode Copy Sets the default 
mode of the MFP.
Opera-
tion 
ClearOperation Timeout 3 minutes Sets time of auto-
matic reset. 
Range: 1 to 10 
minutes.
Clear After Job OFF Sets whether or 
not to reset after 
any job is com-
pleted.
Sound 
ControlKey Touch Tone Volume Middle Sets the volume 
of the key-touch 
tone.
FAX Buzzer Volume Middle Sets the volume 
for transmission 
complete 
acknowledgment.
Local 
Inter-
face
1
USB 
MenuSoft Reset Disable Enables/Disables 
the soft reset 
command.
Speed 480 Mbps Selects the maxi-
mum transfer 
speed of the USB 
interface.
USB PS-Protocol RAW Selects a USB PS-
protocol.
Offline Receive Disable Sets whether to 
receive data in 
offline state or in 
recoverable error 
state.
Serial Number Enable Sets whether or 
not to use a USB 
serial number.
System 
SetupAccess Control Disable Sets access con-
trol.
Downloaded From ManualsPrinter.com Manuals 
						

							199 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
LDAP 
Server 
SettingUser Authentification Method Local [Access Control] 
must be set to 
[User] or [Pass-
word].
Unit of Measure inch Selects a display 
unit of measure.
Date Format mm/dd/yyyy Selects a date for-
mat.
Allow all reports to print Disable Sets whether or 
not to allow print-
ing reports with 
personal informa-
tion.
Near life LED Enable Sets whether or 
not to light an 
LED when a near 
life warning 
occurs.
Status in Near Life Enable Sets whether or 
not a message is 
displayed when a 
near life warning 
occurs.
Address Information Lock Time 
Out3 minutes Sets time until a 
lock is released by 
the MFP when 
address book, 
telephone book, 
or profile is kept 
locked by the util-
ities. Range: 1 to 
10 minutes.
USB Memory interface Enable Change to [
Dis-
able
] to disable 
the scan to USB 
and the print from 
USB memory 
functions.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							200 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
LDAP 
Server 
SettingPanel contrast 0 Sets the LCD 
panel contrast. 
Range: 
±10 
(increments of 1).
Power 
SavePower Save Time 30 minutes Sets a time inter-
val before the MFP 
enters the power 
save mode.
Sleep Time 10 minutes Sets a time inter-
val before the MFP 
enters the sleep 
mode.
Silent Mode ON Enables/Disables 
the silent mode.
Power 
SaveECO Mode ON [
ON]: the MFP 
starts a small 
print job before 
the temperature 
of the fixing 
device reaches 
the regulation 
degree, which 
allows you to con-
serve electricity.
[
OFF]: the MFP 
starts a print job 
only after the 
temperature of 
the fixing device 
reaches the regu-
lation temperra-
ture.
Memory 
SetupReceive Buffer Size Auto Sets the recep-
tion buffer size 
that local inter-
face secures.
Resource Save OFF Sets the resource 
save area.
Item Default Description
Downloaded From ManualsPrinter.com Manuals