OKI MC561dn User Manual

							111 – Printing: Booklet Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
properties > OKI MC561(PS) > Advanced > Enable 
advanced printing features.
Mac OS X Printer Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Select Paper Handling from the panel menu.
4Select Normal or Reverse from Page Order on the Paper 
Handling panel.
5Configure other settings if necessary and then start printing.
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu.
Booklet Printing ______________
You can print multi-page documents with their pages ordered and 
arranged so that the final printed output can be folded into a booklet.
Important!
• This function is not available with the Mac OS X printer 
driver.
• Watermarks are not printed properly with this function.
Downloaded From ManualsPrinter.com Manuals 
						

							112 – Printing: Booklet Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
• This function may not be available in some applications.
• If you want to make an A5 booklet using A4 sheets, select A4 
for the paper size.
The procedures below use the MC561 as an example.
Windows PCL/PCL XPS Printer Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4On the Setup tab, select Booklet at Finishing Mode.
5Click Options, then set the booklet print options if necessary.
-Select a signature size (the number of pages per side of 
each sheet of paper) from the Signature drop-down list.
-Select the Right to Left= check box and specify a bind 
margin if your document is going to be thick.
6Click OK.
7Configure other settings if necessary and then start printing.
Note
When you cannot select this function, click Start > Devices 
and Printers > right-click the OKI MC561 icon > select Printer 
properties > OKI MC561(PCL) or OKI MC561(PC) > 
Advanced > Print Processor > MLLAPP3 > OK.
Windows PS Printer Driver 
1Open the file you want to print.
Downloaded From ManualsPrinter.com Manuals 
						

							113 – Printing: Cover Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4On the Layout tab, select Booklet at Page Format.
5Configure other settings if necessary and then start printing.
Note
If you cannot use this function, click Start > Devices and 
Printers > right-click the OKI MC561 icon > select Printer 
properties > OKI MC561(PS) > Advanced > select the 
Enable advanced printing features check box.
Cover Printing _______________
You can feed the first page of a print job from one tray and the 
remaining pages from another tray. This function is useful when you 
want to use a kind of paper for a cover and another for body pages.
Important!
This function is not available with the Windows PS printer 
driver.
Windows PCL/PCL XPS Printer Driver
1Load the cover media and interior pages media in the appropriate 
trays.
2Open the file you want to print.
3From the File menu, select Print.
4Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
5On the Setup tab, click Paper Feed Options.
6Select the Use different source for first page check box.
Downloaded From ManualsPrinter.com Manuals 
						

							114 – Printing: Poster Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
7Select a source tray from Source and click OK.
If necessary, select a paper weight from the Weight drop-down 
list.
8Configure other settings if necessary and then start printing.
Mac OS X Printer Driver
1Load the cover media and interior pages media in the appropriate 
trays.
2Open the file you want to print.
3From the File menu, select Print.
4Select Paper Feed from the panel menu.
5Select First Page From and select source trays for the first page 
and the remaining pages.
6Configure other settings if necessary and then start printing.
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu.
Poster Printing _______________
You can print a poster by dividing a single document into parts, then 
enlarging each part and printing each one on a separate sheet of 
paper. You can then combine the separate sheets to create a poster.
Downloaded From ManualsPrinter.com Manuals 
						

							115 – Printing: Poster Printing
MC361/MC561/CX2731 MFP Advanced User’s Guide
Important!
You cannot use poster printing:
• with the Windows PS printer driver or the Mac OS X printer 
driver.
• when you use a NetBEUI or IPP network.
• when you use the encrypted secure printing mode from a 
client computer sharing the MFP with a print server.
For Windows PCL/PCL XPS Printer 
Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4On the Setup tab, select PosterPrint at Finishing Mode.
5Click Options.
6Set values for Enlarge, Add Registration Marks, or Add 
Overlap if necessary and press OK.
7Configure other settings if necessary and then start printing.
Note
• When making an A3 size poster from two A4 sheets, select A4 
for the paper size and “2” for “Enlarge”.
• If you cannot select this function, click Start > Devices and 
Printers > right-click the OKI MC561 icon > select Printer 
properties > OKI MC561(PCL) or OKI MC561(PCL) > 
Advanced > Print Processor >MLLAPP3 > OK.
Downloaded From ManualsPrinter.com Manuals 
						

							116 – Printing: Changing Print Quality
MC361/MC561/CX2731 MFP Advanced User’s Guide
Changing Print Quality _________
You can change the print quality to suit your needs.
Note
Normal (600X600) may produce better results for printing on 
a larger size of paper with the PS printer driver.
Windows Printer Drivers
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the Job Option tab
5Select a print quality level under Quality.
6Configure other settings if necessary and then start printing.
Mac OS X Printer Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Select Printer Features from the panel menu.
4Select Job Options from Feature Sets.
5Select a print quality level from Quality.
6Configure other settings if necessary and then start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							117 – Printing: Enhancing Photos
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu.
Enhancing Photos_____________
Important!
• This function is not available with the Windows PS printer 
driver and the Mac OS X printer driver.
• This function is not available when File > Print > 
Preferences > Color tab > Office Document check 
box is selected with the Windows PCL printer driver.
Windows PCL/PCL XPS Printer Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the Job Options tab.
5Select the Photo enhance check box.
6Configure other settings if necessary and then start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							118 – Printing: Emphasizing Fine Lines
MC361/MC561/CX2731 MFP Advanced User’s Guide
Emphasizing Fine Lines ________
Important!
• This function is turned on by default.
• With some applications, if this function is turned on, the 
spaces in bar codes may become too narrow. If this 
happens, turn off this function.
Windows Printer Drivers
1Open the file you want to print.
2From the File menu, select Print.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the Job Options tab.
5Click the Advanced.
6Select the Adjust ultra fine lines check box and then click OK.
7Configure other settings if necessary and then start printing.
Mac OS X Printer Driver 
1Open the file you want to print.
2From the File menu, select Print.
3Select Printer Features from the panel menu.
4Select Image Option from Feature Sets.
5Select the Adjust ultra fine lines check box.
6Configure other settings if necessary and then start printing.
Downloaded From ManualsPrinter.com Manuals 
						

							119 – Printing: Auto Tray Selection
MC361/MC561/CX2731 MFP Advanced User’s Guide
Note
If the print dialog contains only two menus and does not contain 
the options you expect to see for the Mac OS X 10.5 or later, click 
the disclosure triangle beside the Printer menu.
Auto Tray Selection ___________
You can switch paper feed trays with the same size of paper 
configured on the printer driver automatically.
First, set the MP tray to be a target tray for auto selection on the 
operator panel. Then, set the auto selection of the tray with the 
printer driver.
Note
• Make sure to set a paper size for Tray1, Tray2 (optional) and the 
MP tray. Available paper size differs depending on each tray. For 
details, see the Basic User’s Guide on the DVD supplied with the 
MFP.
• In the default settings, the [MP tray Usage] is [Not Used]. In 
such a case, the MP tray is not supported by the auto tray 
switching function.
• To enter the [Admin Setup] menu, an administrator password is 
necessary. The default password is aaaaaa.
1Press the  key on the operator panel.
2Press the down arrow key to select [Admin Setup], then press 
.
3Enter the administrator password.
4Use the arrow keys to select [Enter], then press .
5Press the down arrow key to select [Print Setup], then press 
.
Downloaded From ManualsPrinter.com Manuals 
						

							120 – Printing: Auto Tray Selection
MC361/MC561/CX2731 MFP Advanced User’s Guide
6Make sure that [Print menu] is selected, then press .
7Make sure that [Tray Configuration] is selected, then press 
.
8Press the down arrow key to select [MP Tray Usage], then press 
.
9Press the down arrow key to select [When Mismatching], then 
press .
10Use the left arrow key to go back to the main screen.
11Specify a paper tray on the printer driver and start printing.
For Windows PCL/PCL XPS Printer 
Driver
1Open the file you want to print.
2From the “File” menu, select “Print”.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4On the “Setup” tab, select “Automatically Select” from “Source”.
5Configure other settings if necessary and then start printing.
For Windows PS Printer Driver
1Open the file you want to print.
2From the “File” menu, select “Print”.
3Click “Preferences” (or “Properties”, depending on the version of 
Windows you are using).
4Select the “Paper/Quality” tab.
5Select “Automatically Select” from “Paper Feed Source”.
6Configure other settings if necessary and then start printing.
For Mac OS X PS Printer Driver
1Open the file you want to print.
2From the “File” menu, select “Print”.
Downloaded From ManualsPrinter.com Manuals