OKI MC561dn User Manual

							181 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Admin Setup: Print From USB Memory 
Setup > Default Settings 
Admin Setup: Print Setup
Item Default Description
Paper Feed Tray 1 
(Letter)Sets the default feed tray.
Copies 1 Sets the number of copies.
Duplex OFF Sets whether to use the duplex function by 
default. 
Binding Long 
edge 
bindSets the default binding position for duplex print-
ing.
Fit ON Sets whether to scale the page size of documents 
to fit the paper size.
Item Default Description
Print 
menuTr a y  C o n -
figurationPaper Feed Tray 1 Selects the default feed 
tray.
Auto Tray Switch ON Enables/disables the 
automatic tray switch 
function.
Tray Sequence Down Sets the selection order 
priority for automatic 
tray selection and auto-
matic tray switching.
MP Tray Usage Do Not 
Use[
When Mismatching]: 
If a paper size or type in 
a tray is not matched to 
that of the print data, 
uses paper from the MP 
tray instead of the speci-
fied tray. 
 
[Do Not Use]: makes 
the MP tray unavailable 
in auto tray selection or 
switching.
Downloaded From ManualsPrinter.com Manuals 
						

							182 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuTr a y  C o n -
figurationMedia Check Enable Enables/disables check-
ing the paper size versus 
the document page size.
Print Setup Copies 1 Sets the number of cop-
ies to be printed. For 
local printing, this set-
ting is invalid except for 
demo data. 
 
Range: 1 to 999.
Duplex OFF Sets whether or not to 
use the duplex function 
by default.
Binding Long 
edge 
bindSets the default binding 
position for duplex print-
ing.
Resolution 600dpi Sets the default resolu-
tion.
Toner Save Mode OFF Sets whether or not to 
use the toner save mode 
to reduce the amount of 
toner used for imaging.
Mono-Print Speed Auto Selects a print speed to 
suit your document type.
Orientation Portrait Selects the default page 
orientation.
Lines Per Page 64 lines  Sets the number of lines 
of text per page (PCL 
only). The default num-
ber of lines for A4 por-
trait is 64. The number 
differs depending on the 
size of paper in the feed 
tray.
Edit Size Cas-
sette 
sizePCL only. Sets the size of 
the printable page area 
to match the size of the 
paper when no com-
mand is issued by the 
computer.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							183 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuPrint Setup Width 8.5 inch 
(216 
mm)Sets the default width of 
the custom size paper. 
Range: 64 to 216 mm 
(2.5 to 8.5 inches).
Length 11 inch 
(279 
mm)Selects the default 
length of the custom size 
paper. Available range: 
127 to 1321 mm (5.0 to 
52.0 inches).
Printer 
AdjustManual Timeout 60 sec-
ondsSets how many seconds 
the MFP will wait for 
paper to be fed before 
cancelling a job.
Wai t  T i me out 4 0 se c-
ondsSets how many seconds 
the MFP will wait when 
received data pauses 
before forcing a page 
eject. In PostScript emu-
lation mode a job is can-
celed if timeout occurs.
Print Mode with-
out Color TonerAlarm Sets whether to print a 
job in black-and-white or 
pause it in an alarm 
state when a color toner 
empty error occurs.
Jam Recovery Enable Sets whether or not the 
MFP will attempt to re-
print any pages lost due 
to a paper jam once the 
jam has been cleared.
Paper Black Set-
ting0 Sets values to make a 
fine adjustment to very 
visible faded print results 
or light specks (or 
streaks) results in plain 
paper black mode.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							184 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuPrinter 
AdjustPaper Color Set-
ting0 Sets values to make a 
fine adjustment to very 
visible faded print results 
or light specks (or 
streaks) results in plain 
paper color mode.
SMR Setting 0 Change the setting if the 
print quality is uneven.
BG Setting 0 Change the setting if the 
background is dark.
Print Posi-
tion AdjustFront X Adjust 0.00 mm Adjusts the position of 
the whole printing image 
perpendicular to the 
direction of paper move-
ment. Range: 
±2.00 mm 
(0.25 mm increments).
Front Y Adjust 0.00 mm Adjusts the position of 
the whole printing image 
parallel to the direction 
of paper movement. 
Range: 
±2.00 mm (0.25 
mm increments).
Print Posi-
tion AdjustBack X Adjust 0.00 mm Adjusts the position of 
the image on the reverse 
side of a duplex print 
perpendicular to the 
direction of paper move-
ment. Range: 
±2.00 mm 
(0.25 mm increments).
Back Y Adjust 0.00 mm Adjusts the position of 
the image on the reverse 
side of a duplex print 
parallel to the direction 
of paper movement. 
Range: 
±2.00 mm (0.25 
mm increments).
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							185 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Print 
menuDrum Cleaning OFF Sets whether to do a 
drum cleaning before 
printing in order to 
reduce horizontal white 
lines.
Hex Dump OFF Prints out the data 
received from the host 
computer in hexidecimal 
code.
Color 
MenuDensity Control Auto Selects whether image 
density is automatically 
or manually adjusted.
Adjust Density Execute Starts the auto density 
setup.
Color Tuning/Print Pattern Prints the color tuning 
pattern to help you 
adjust the color balance.
Cyan Highlight 0 Adjusts color tone den-
sity for each color (cyan, 
magenta, yellow and 
black).  Cyan Mid-1one 0
Cyan Dark 0
Magenta Highlight 0
Magenta Mid-1one 0
Magenta Dark 0
Yellow Mid-1one 0
Yellow MID-TONE 0
Yellow Dark 0
Black Highlight 0
Black MID-TONE 0
Black Dark 0
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							186 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Color 
MenuCyan Darkness 0 Adjusts the darkness of 
each color (cyan, 
magenta, yellow and 
black).  Magenta Darkness 0
Yellow Darkness 0
Black Darkness 0
Adjust 
 
RegistrationExecute Does an automatic color 
registration adjustment.
CYAN Reg Fine Adj 0 Does a fine adjustment 
to the image position 
error of each color. MAGENTA Reg Fine Adj 0
YELLOW Reg Fine Adj 0
Ink Simulation OFF PS only. Sets the ink 
simulation.
UCR Low Selects the amount of 
black used during color 
printing.
CMY100% Density Disable Selects whether black 
areas are produced 
using 100% C, M, and Y, 
or black. 100% C, M, 
and Y results in a gloss-
ier finish.
CMYK Conversion ON When [
OFF] is selected, 
the MFP simplifies the 
conversion process of 
CMYK data, which 
reduces processing time.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							187 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
Sys-
tem 
Con-
figura-
tion 
MenuPersonality Auto 
Emula-
tionSelects the emulation 
mode. When set to auto, 
the correct emulation is 
automatically selected 
each time a print job is 
received.
Alarm release Manual [
Manual]: non-critical 
warnings, such as 
requests for a different 
paper size, can be 
cleared by pressing the 
 key.
[Auto]: they are cleared 
when the print job 
resumes.
Auto Continue OFF Sets whether the MFP 
automatically recovers 
from a memory over-
flow.
Error Report OFF Sets whether or not to 
print error details when 
a PostScript emulation 
error occurs.
PCL 
SetupFont Source Resident Selects the location of 
the font to use.
Font No. I0 Selects the number of 
the font to use. Range: 
I0 to I90 when [Resi-
dent] is selected
Font Pitch 10.00 
CPISets the width of the PCL 
default font.
Range: 0.44 to 99.99 
CPI (character per inch).
Font Height 12.00 
pointSets the height of the 
PCL default font.
Range: 4.00 to 999.75 
point.
Symbol Set PC-8 Selects a PCL symbol 
set.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							188 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
PCL 
SetupA4 Print Width 78 Col-
umnSets a number of digits 
for automatic line feed 
on A4 paper. 
White Page Skip OFF Selects whether to print 
blank pages.
CR Function CR Sets the MFP operation 
when receiving CR code.
LF Function LF Sets the MFP operation 
when receiving LF code.
Print Margin Normal Sets the area of the 
page that is non-print-
able.
True Black OFF Selects whether black 
image data is printed by 
using black toner only or 
mixing CMYK.
Pen Width Adjust ON Sets whether the thin-
nest line width is empha-
sized to look wider.
Tray ID# Tray 2 5 Sets a number to tray 2 
(optional) and the MP 
tray for the paper feed 
destination command in 
PCL emulation. Range: 1 
to 59. MP tray 4
PS 
SetupL1 Tray TYPE1 Sets a type of tray num-
bering in PostScript print 
job. 
[
TYPE1]: the tray num-
bering starts from 0.
[
TYPE2]: the tray num-
bering starts from 1.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							189 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
SIDM 
SetupSIDM Manual ID# 2 Sets a number to SIDM 
Manual, MP and Tray ID.
SIDM Manual2 ID# 3
SIDM MP Tray ID# 4
SIDM Tray1 ID# 1
SIDM Tray2 ID# 5
IBM 
PPR 
SetupCharacter Pitch 10 CPI Sets character pitch in 
IBM PPR emulation.
Font  Condense 12 CPI to 
20 CPISpecifies 12 CPI pitch for 
condense mode.
Character Set SET-2 Selects a character set.
Symbol Set IBM-437 Selects a symbol set.
Letter O Style Disable Sets the style that 
replaces 9BH with letter 
o and 9DH with a zero.
Zero Character Normal Sets whether the zero is 
slashed or unslashed.
Line Pitch 6 LPI Sets the line spacing.
White Page Skip OFF Selects whether blank 
pages are printed.
CR Function CR Sets the MFP operation 
when receiving CR code.
LF Function LF Sets the MFP operation 
when receiving LF code.
Line Length 80 col-
umnSets the number of char-
acters per line.
Form Length 11.7 
inchSets the length of paper.
TOF Position 0.0 inch Sets the top margin.
Left Margin 0.0 inch Sets the left margin.
Item Default Description
Downloaded From ManualsPrinter.com Manuals 
						

							190 – MFP Menu: Admin Setup
MC361/MC561/CX2731 MFP Advanced User’s Guide
IBM 
PPR 
SetupFit to Letter Disable Sets the printing mode 
that can fit print data, 
equivalent to 11 inches 
(66 lines), in the letter-
size printable area.
Text Height Same Sets the height of char-
acters.
[
Same]: Regardless of 
CPI, character heights 
do not vary.
[
Diff]: As CPI varies, 
character heights vary.
EP-
SON 
FX 
SetupCharacter Pitch 10 CPI Sets character pitch in 
EPSON FX emulation.
Character Set SET-2 Selects a character set.
Symbol Set IBM-437 Selects a symbol set.
Letter O Style Disable Sets the style that 
replaces 9BH with letter 
o and 9DH with a zero.
Zero Character Normal Sets whether the zero is 
slashed or unslashed.
EPSO
N FX 
SetupLine Pitch 6 LPI Sets the line spacing.
White Page Skip OFF Selects whether blank 
pages are printed.
CR Function CR Sets the MFP operation 
when receiving CR code.
Line Length 80 col-
umnSets the number of char-
acters per line.
Form Length 11.7 
inchSets the length of paper.
TOF Position 0.0 inch Sets the top margin.
Left Margin 0.0 inch Sets the left margin and 
edge of the paper.
Item Default Description
Downloaded From ManualsPrinter.com Manuals