Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Have a look at the manual Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 297 Change E1 CAS P2 - Australian Network ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian Network protocol to use this procedure. See Assign E1 CAS P2 - Australian Network Protocol to E1 Circuit Cards on page 294 , for more information about making the initial assignment. Note:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well. Use the following procedure to change the E1 CAS P2 - Australian Network parameters: 1 Start at the E1 CAS P2 - Australian Network menu (Figure 146 on page 293 ) and select The system displays the Change Parameters: E1 CAS P2 - Australian Network window (Figure 148 on page 298 ). > Change Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 298 Figure 148. Change Parameters: E1 CAS P2 - Australian Network Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the current values for the circuit card number entered. 3 Change any of the parameters as described in Assign E1 CAS P2 - Australian Network Protocol to E1 Circuit Cards on page 294 . 4 Press F3 (Save). The system saves the changed parameters.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 299 Display E1 CAS P2 - Australian Network ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian Network protocol to use this procedure. See Assign E1 CAS P2 - Australian Network Protocol to E1 Circuit Cards on page 294 , for more information about making the initial assignment. Use the following procedure to display the E1 CAS P2 - Australian Network parameters of an E1 circuit card: 1 Start at the E1 CAS P2 - Australian Network menu (Figure 146 on page 293 ) and select The system displays the Display Parameters: E1 CAS P2 - Australian Network window (Figure 149 on page 300 ). > Display Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 300 Figure 149. Display Parameters: E1 CAS P2 - Australian Network Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. The system displays the parameter values for the selected circuit card. 3 Press F6 (Cancel) to return to the E1 CAS P2 - Australian Network menu.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 301 Unassign E1 CAS P2 - Australian Network Protocol to E1 Circuit CardsNote:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. Use the following procedure to unassign the E1 CAS P2 - Australian Network protocol: 1 Start at the E1 CAS P2 - Australian Network menu (Figure 146 on page 293 ) and select The system displays the Unassign Card: E1 CAS P2 - Australian Network window (Figure 150 on page 302 ). > Unassign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 302 Figure 150. Unassign Card: E1 CAS P2 - Australian Network Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. The system displays the current parameter values for the selected circuit card. 3 Press F3 (Save). The system removes the E1 CAS P2 - Australian Network assignment from the selected circuit card. 4 Press F6 (Cancel) repeatedly to return to the Digital Interfaces menu.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 303 T1 A/B Robbed-bit E&M Protocol Make sure that the switch to which the system is connected is programmed with the following options: • The T1 interface uses wink start robbed-bit E&M signaling on a link using D4 framing with zero code suppression (ZCS). • The E1/T1 interface outpulses dual tone multifrequency (DTMF) tones at 7 pulses per second when originating outbound calls and requires DTMF when taking inbound calls. Access T1 A/B Robbed-bit E&M Menu Use the following procedure to access the T1 A/B Robbed-bit E&M menu:1 Start at the Digital Interfaces menu (Figure 129 on page 248 ) and select: The system displays the T1 A/B Robbed-bit E&M menu (Figure 151 on page 304 ). > T1 A/B Robbed-bit E&M
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 304 Figure 151. T1 A/B Robbed-bit E&M Menu Assign T1 A/B Robbed-bit E&M to Digital Circuit CardsNote:Before a new protocol can be assigned to a circuit card, any existing protocol must first be unassigned. See Unassign T1 A/B Robbed-bit E&M to Digital Circuit Cards on page 314 below for more information. Before attempting to make any assignment changes to circuit cards, they must be in the MANOOS state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 305 Use the following procedure to assign the T1 A/B Robbed-bit E&M protocol to a digital circuit card:1 Start at the T1 A/B Robbed-bit E&M menu (Figure 151 on page 304 ) and select: The system displays the Assign Card: T1 A/B Robbed-bit E&M window (Figure 152 on page 306 ). > Assign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 306 Figure 152. Assign Card: T1 A/B Robbed-bit E&M Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the default values for the circuit card number entered. The Card Number: field is blank in Figure 152 on page 306 . After you enter the circuit card number, certain E1-only fields disappear ( Idle Code: , A-LAW or MU-LAW: , and CRC: ).