Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Have a look at the manual Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 277 10 Enter the cable distance, in feet, between the Channel Service Unit (CSU) and the voice system in the CSU Distance: field, or press F2 (Choices) to select from a menu. Valid values are 0–133, 134–266, 267–399, 400–533, and 534–666. The default is 0–133 feet. If there is no CSU, the value entered in this field should be the cable distance between the voice system and the equipment to which it is connected. ! CAUTION: The Idle Code:, A-LAW or MU-LAW:, and CRC: field parameters must match the settings on the DEFINITY switch to avoid service complications.11 Press F3 (Save). The system saves the parameter information and assigns the Line Side Galaxy protocol to the selected T1 circuit card. Change Line Side Galaxy ParametersThe digital circuit card must first be assigned to the Line Side Galaxy protocol to use this procedure. See Assign Line Side Galaxy Protocol to Digital Circuit Cards on page 271 , for more information about making the initial assignment. Note:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 278 Use the following procedure to change the Line Side Galaxy parameters:1 Start at the Line Side Galaxy menu (Figure 136 on page 271 ) and select The system displays the Change Parameters: Line Side Galaxy window (Figure 138 on page 278 ). Figure 138. Change Parameters: Line Side Galaxy Window > Change Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 279 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the current values for the circuit card number entered. 3 Change any of the parameters described in Assign Line Side Galaxy Protocol to Digital Circuit Cards on page 271 . 4 Press F3 (Save). The system saves the changed parameters. Display Line Side Galaxy ParametersThe digital circuit card must first be assigned to the Line Side Galaxy protocol to use this procedure. See Assign Line Side Galaxy Protocol to Digital Circuit Cards on page 271 , for more information about making the initial assignment. Use the following procedure to display the Line Side Galaxy parameters of a digital circuit card: 1 Start at the Line Side Galaxy menu (Figure 136 on page 271 ) and select The system displays the Display Parameters: Line Side Galaxy window (Figure 139 on page 280 ). > Display Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 280 Figure 139. Display Parameters: Line Side Galaxy Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. 3 Press F6 (Cancel) to return to the Line Side Galaxy menu.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 281 Unassign Line Side Galaxy Protocol to Digital Circuit Cards Note:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. Use the following procedure to unassign the Line Side Galaxy protocol: 1 Start at the Line Side Galaxy menu (Figure 136 on page 271 ) and selec The system displays the Unassign Card: Line Side Galaxy window (Figure 140 on page 282 ). > Unassign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 282 Figure 140. Unassign Card: Line Side Galaxy Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. 3 Press F3 (Save). The system removes the Line Side DEFINITY assignment from the selected circuit card. 4 Press F6 (Cancel) repeatedly to return to the Digital Interfaces menu.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 283 E1 CAS P2 - Australian DEFINITY ProtocolAccess E1 CAS P2 - Australian DEFINITY Menu Use the following procedure to access the E1 CAS P2 - Australian DEFINITY protocol menu:1 Start at the Digital Interfaces menu (Figure 129 on page 248 ) and select The system displays the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283 ). Figure 141. E1 CAS P2 - Australian DEFINITY Menu Use the following procedures to assign/unassign the E1 CAS P2 - Australian DEFINITY protocol to digital circuit cards, and administer the switch interface parameters.> E1 CAS P2 - Australian DEFINITY
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 284 Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit CardsNote:Before a new protocol can be assigned to a circuit card, any existing protocol must first be “unassigned.” See Unassign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards on page 291 for more information. Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well. Use the following procedure to assign the E1 CAS P2 - Australian DEFINITY protocol to an E1 circuit card: 1 Start at the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283 ) and select The system displays the Assign Card: E1 CAS P2 - Australian DEFINITY window (Figure 142 on page 285 ). > Assign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 285 Figure 142. Assign Card: E1 CAS P2 - Australian DEFINITY Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the default values for the circuit card number entered. 3 Enter the values as shown in Table 29 on page 286 for each of the fields in the window.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 286 4 Press F3 (Save). The system saves the parameter information and assigns the E1 CAS P2 - Australian DEFINITY protocol to the selected E1 circuit card. Table 29. Parameter Values for Assign Card: E1 CAS P2 - Australian DEFINITY Window Field Name Enter ValueFraming/Line Coding: CEPTHDB3 Idle Code: 01010100 DTMF Muting: Yes A-LAW or MU-LAW: A-LAW CRC: Yes Max. Digits in Called Number: 4 Outgoing Addressing Type: DTMF Incoming Addressing Type: DTMF Incoming Speech Volume: 1414 Outgoing Speech Volume: 707