Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide
Have a look at the manual Lucent Technologies Intuity CONVERSANT System Version 7.0 Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 287 Change E1 CAS P2 - Australian DEFINITY ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian DEFINITY protocol to use this procedure. See Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards on page 284 , for more information about making the initial assignment. Note:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well. Use the following procedure to change the E1 CAS P2 - Australian DEFINITY parameters: 1 Start at the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283 ) and select The system displays the Change Parameters: E1 CAS P2 - Australian DEFINITY window (Figure 143 on page 288 ). > Change Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 288 Figure 143. Change Parameters: E1 CAS P2 - Australian DEFINITY Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the current values for the circuit card number entered. 3 Change any of the parameters described in Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards on page 284 . 4 Press F3 (Save). The system saves the changed parameters.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 289 Display E1 CAS P2 - Australian DEFINITY ParametersThe E1 circuit card must first be assigned to the E1 CAS P2 - Australian DEFINITY protocol to use this procedure. See Assign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards on page 284 , for more information about making the initial assignment. Use the following procedure to display the E1 CAS P2 - Australian DEFINITY parameters of an E1 circuit card: 1 Start at the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283 ) and select The system displays the Display Parameters: E1 CAS P2 - Australian DEFINITY window (Figure 144 on page 290 ). > Display Parameters
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 290 Figure 144. Display Parameters: E1 CAS P2 - Australian DEFINITY Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. The system displays the parameter values for the selected circuit card. 3 Press F6 (Cancel) to return to the E1 CAS P2 - Australian DEFINITY menu.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 291 Unassign E1 CAS P2 - Australian DEFINITY Protocol to E1 Circuit Cards Note:Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 292 Use the following procedure to unassign the E1 CAS P2 - Australian DEFINITY protocol:1 Start at the E1 CAS P2 - Australian DEFINITY menu (Figure 141 on page 283 ) and select The system displays the Unassign Card: E1 CAS P2 - Australian DEFINITY window (Figure 145 on page 292 ). Figure 145. Unassign Card: E1 CAS P2 - Australian DEFINITY Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. The system displays the current parameter values for the selected circuit card. 3 Press F3 (Save). The system removes the E1 CAS P2 - Australian DEFINITY assignment from the selected circuit card. 4 Press F6 (Cancel) repeatedly to return to the Digital Interfaces menu.> Unassign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 293 E1 CAS P2 - Australian Network ProtocolAccess E1 CAS P2 - Australian Network Menu Use the following procedure to access the E1 CAS P2 - Australian Network protocol menu:1 Start at the Digital Interfaces menu (Figure 129 on page 248 ) and select The system displays the E1 CAS P2 - Australian Network menu (Figure 146 on page 293 ). Figure 146. E1 CAS P2 - Australian Network Menu Use the following procedures to assign/unassign the E1 CAS P2 - Australian Network protocol to digital circuit cards, and administer the switch interface parameters.> E1 CAS P2 - Australian Network
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 294 Assign E1 CAS P2 - Australian Network Protocol to E1 Circuit CardsNote:Before a new protocol can be assigned to a circuit card, any existing protocol must first be “unassigned.” See Unassign E1 CAS P2 - Australian Network Protocol to E1 Circuit Cards on page 301 for more information. Before attempting to make any assignment changes to circuit cards, they must be in the “manoos” state. See Equipment State on page 150 in Chapter 3, Voice System Administration , for additional information. If you change digital protocol assignments on the voice system, you must make the change on the switch as well. Use the following procedure to assign the E1 CAS P2 - Australian Network protocol to an E1 circuit card: 1 Start at the E1 CAS P2 - Australian Network menu (Figure 146 on page 293 ) and select The system displays the Assign Card: E1 CAS P2 - Australian Network window (Figure 147 on page 295 ). > Assign Card
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 295 Figure 147. Assign Card: E1 CAS P2 - Australian Network Window 2 Enter the circuit card number in the Card Number: field, or press F2 (Choices) to select from a menu. Initially, all fields are populated with the default values for the circuit card number entered. 3 Enter the values as shown in Table 30 on page 296 for each of the fields in the window.
5 Switch Interface Administration Digital Interfaces Intuity™ CONVERSANT® System Version 7.0 Administration 585-313-501 Issue 3 January 2000 296 4 Press F3 (Save). The system saves the parameter information and assigns the E1 CAS P2 - Australian Network protocol to the selected E1 circuit card. Table 30. Parameter Values for Assign Card: E1 CAS P2 - Australian Network Window Field Name Enter ValueFraming/Line Coding: CEPTHDB3 Idle Code: 01010100 DTMF Muting: Yes A-LAW or MU-LAW: A-LAW CRC: Yes Max. Digits in Called Number: 4 Outgoing Addressing Type: DTMF Incoming Addressing Type: DTMF Incoming Speech Volume: 1414 Outgoing Speech Volume: 707