Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual
Have a look at the manual Toshiba Strata Dk14, Dk40i, Dk424 Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Toll Restriction Program *45-4 – Special Code Dialing Sequence with LCR Strata DK Programming 5/994-29 Toll Restriction Program *45-4LED 02 ONLED 02 OFF LED 01 ONCode + Pause + F-MDT + number + E-MDT F-MDT + Code + Pause + number + E-MDT LED 01 OFFCode + F-MDT + number + E-MDT F-MDT + Code + number + E-MDT F-MDT = Added digits in Front of number dialed (Program 55-1) E-MDT = Added digits at the End of number dialed (Program 55-2) Code = Digits programmed in Program *45-3 Number = Dialed telephone number 9 = LCR access code Pause = Pause time determined in Program 12-3
Toll Restriction Program 46-2~4 – Toll Restriction Allowed/Denied Area Codes by Class 4-30Strata DK Programming 5/99 Program 46-2~4 – Toll Restriction Allowed/Denied Area Codes by Class Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:Includes all area codes in all classes ©Tables with deny box checked do not represent memory. All area codes in memory are allowed. ©International calls may be allowed/denied by entering 011 as the area code. See Program 47 for International Call Restriction by Country Codes. Program 46-2~4 Overview Each class area code provides for a different combination of restrictions. The tables in this program define the area codes allowed or denied for each Toll Restriction class. The tables (in memory) operate as allow tables. If an area code exists in a table (displays with 4#), then it is allowed. Anything not displaying is not allowed. Initialized data allows all area codes for each class (all codes are in all tables). All allowed area codes can be displayed (4#) for each class. For each class, choose whether the record table is used to record allowed area codes in memory (allowed) or denied area codes not in memory (denied). Enter the area codes that define the set. 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorToll Restriction ClassProcessorToll Restriction Class DK14 1~4 RCTUBA/BB 1~4 DK40i 1~4 RCTUC/D 1~8 RCTUA 1~4 RCTUE/F 1~8 Class: (Check one) AllowedpDeniedp DATA = Area Codes Class: (Check one) Allowed pDeniedp DATA = Area Codes DATA = Area Codes Enter or display area codes. To add a range, enter XXX XXX (low area code high area code). Several ranges or individual area codes may be entered by separating them with the # button. SELECT = Toll Restriction Class (see Legend below) Enter: 2, 3, 4# 2 = add to memory 3 = Delete from memory 4# = Display allowed codes in memory (press to scroll)
Toll Restriction Program 46-6~8 – Toll Restriction Allowed/Denied Local Office Codes Assigned by Class Strata DK Programming 5/994-31 Toll Restriction Program 46-6~8 – Toll Restriction Allowed/Denied Local Office Codes Assigned by Class Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:Includes all office codes in all classes ©Tables with deny box checked do not represent memory. All office codes in memory are allowed. ©International calls may be allowed/denied by entering 011 as the area code. See Program 47 for International Call Restriction by Country Codes. 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorToll Restriction ClassProcessorToll Restriction Class DK14 1~4 RCTUBA/BB 1~4 DK40i 1~4 RCTUC/D 1~8 RCTUA 1~4 RCTUE/F 1~8 Class:(Check one) AllowedpDeniedp DATA = Office Codes Class:(Check one) Allowed pDeniedp DATA = Office Codes DATA = Office Codes Enter or display office codes. To add a range, enter XXX XXX (low office code high office code). Several ranges or individual office codes may be entered by separating them with the # button. SELECT = Toll Restriction Class (see Legend below) Enter: 6, 7, 8# 6 = add to memory 7 = Delete from memory 8# = Display allowed codes in memory (press # to scroll)
Toll Restriction Program 46-6~8 – Toll Restriction Allowed/Denied Local Office Codes Assigned by Class 4-32Strata DK Programming 5/99 Program 46-6~8 Overview This program defines the office codes allowed or denied for each Toll Restriction Class within the home area code. Office code tables for each class can each describe office codes allowed or denied for the class. The tables (in memory) operate as allow tables. If an office code exists in a table (displays with 8#), then it is allowed. Anything not displaying is not allowed. Initialized data allows all office codes in the home area code for each class. For each class, choose whether the record table is used to record allowed office codes in memory (allowed) or denied office codes not in memory (denied). Enter the office codes that define the set.
Toll Restriction Programs 46-10~80 – Toll Restriction Class Parameters Strata DK Programming 5/994-33 Toll Restriction Programs 46-10~80 – Toll Restriction Class Parameters Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:All LEDs OFF Programs 46-10~80 Overview This program defines parameters of each Toll Restriction class, including dialing plan restrictions and exceptions to previous restrictions. This program also relates to Program 47. See Program 47 for more explanation. Run these programs for dial 0, 01, */# restriction and long distance information (555) assignments. Toll Restriction exceptions and dialing plan restrictions may be defined for each class. ©Programs 46-10 and 46-11 assign Class 1 restriction exceptions and parameters ©Programs 46-20 and 46-21 assign Class 2 ©Programs 46-30 and 46-31 assign Class 3; etc. LED 01: 0 Restricted Mark an X next to LED 01 if operator or operator-assisted calls are restricted for the class being defined. To allow 0 + dialing LED 01 must be OFF. Allowing 0 + dialing allows operator-assisted toll calls. If a station is allowed 0 + Credit Card calling in Program 43, LED 01 must be OFF. Program 43 will restrict operator assisted calls. 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorToll Restriction ClassProcessorToll Restriction Class DK14 1~4 RCTUBA/BB 1~4 DK40i 1~4 RCTUC/D 1~8 RCTUA 1~4 RCTUE/F 1~8 Class Number Button 01 LEDButton 02 LEDButton 03 LEDButton 04 LED ONOFFONOFFONOFFONOFF Dial 0 RestrictedDial 0 AllowedDial 01 RestrictedDial 01 AllowedA/C+555 or 1+A/ C+555 Allowed for all A/Cs555 Allowed or Denied per A/C Restriction TA b l eRestrict Numbers that contain * or # within the first 4 digitsAllow Numbers that contain * or # within the first 4 digits 1 2 3 4 5 6 7 8 Turn LEDs 01, 02, 03, or 04 ON to select restriction option.Select Class from Legend below.
Toll Restriction Programs 46-10~80 – Toll Restriction Class Parameters 4-34Strata DK Programming 5/99 LED 02: 01 Restricted Mark an X next to LED 02 if overseas operator or unassisted overseas operator calls are restricted for the class being defined. If a station is allowed 0 + Credit Card calling in Program 43, LED 02 must be OFF. Program 43 will restrict 01 operator assisted calls. LED 03: 1+AC+555 and AC+555 Allowed Mark an X next to LED 03 to allow the particular class to call all restricted area codes plus the office code of 555, including out-of-area directory assistance calls. Turning the LED off does not necessarily deny information calls. This may also be accomplished in the office code table and/or the area/office code exception tables. LED 04: Restrict Numbers Containing * or # Within the First Four Digits Numbers set in Program *45-2X override the #/* restriction function of Program 46 (10~80) Button LED 04. LED 04 applies only to the first four digits of a dialed number when no digit restriction (Code 0) is set for the station Toll Restriction class in Program 48. Turn LED 04 ON only if Strata DK CO lines are connected to a Central Office that absorbs * and # digits. The first four digits that contain # and * digits can be restricted (LED 04 ON). For example: if LED 04 is ON, 17# is restricted when the # is dialed but 1751# is allowed because “#” comes after the fourth digit dialed. Turn LED 04 OFF if the telephone numbers that contain * and # after the first digit should be allowed (see Programs *45-2 and *45-3).
Toll Restriction Programs 46-11~46-81 – Toll Restriction Class (1~8) Parameters Strata DK Programming 5/994-35 Toll Restriction Programs 46-11~46-81 – Toll Restriction Class (1~8) Parameters Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:Leaves all LEDs OFF Programs 46-11~46-81 Overview Run these programs for area/office code exception table assignments. Refer to the legend above the record sheet for exception tables and classes. Exception tables for both area and office codes will be defined in Program 47. Each class can be assigned any or all of the available office code exception tables. 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorToll Restriction ClassException TableProcessorToll Restriction ClassException Table DK14 1~4 8 RCTUBA/BB 1~4 8 DK40i 1~4 8 RCTUC/D 1~8 16 RCTUA 1~4 8 RCTUE/F 1~8 16 LEDXLED ONLED OFF 20~17Not Used 16Table 16 Area/Office Exception Not Selected 15Table 15 Area/Office Exception Not Selected 14Table 14 Area/Office Exception Not Selected 13Table 13 Area/Office Exception Not Selected 12Table 12 Area/Office Exception Not Selected 11Table 11 Area/Office Exception Not Selected 10Table 10 Area/Office Exception Not Selected 9Table 09 Area/Office Exception Not Selected 8Table 08 Area/Office Exception Not Selected 7Table 07 Area/Office Exception Not Selected 6Table 06 Area/Office Exception Not Selected 5Table 05 Area/Office Exception Not Selected 4Table 04 Area/Office Exception Not Selected 3Table 03 Area/Office Exception Not Selected 2Table 02 Area/Office Exception Not Selected 1Table 01 Area/Office Exception Not Selected Light LED Buttons as required to assign Table to Class.Select Class from Legend below.
Toll Restriction Program 47 – Toll Restriction Exception Office Codes Assigned by Area Codes (Tables 1~16) 4-36Strata DK Programming 5/99 Program 47 – Toll Restriction Exception Office Codes Assigned by Area Codes (Tables 1~16) Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:Assigns no office codes to tables 6SNU +ROG 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorException TableProcessorException Table DK14 01~08 RCTUBA/BB 01~08 DK40i 01~08 RCTUC/D 01~16 RCTUA 01~08 RCTUE/F 01~16 Exception Table: Area Code: DATA = Record of Exception Office Codes SELECT = Exception Table from Legend below. A new exception table is needed for each area code with office codes that are exceptions to restriction.AREA CODE = Enter only one area code per exception table. DATA = Enter or display office code(s). To add a range, enter XXX XXX (low office code high office code). Several ranges or individual office codes may be entered by separating them with the # button. SELECT = Exception Table (01~16) Enter: 2, 3, 4# 2 = add to the exception table 3 = Delete from the exception table 4# =Display the exception table’s office codes.
Toll Restriction Program 47 – Toll Restriction Exception Office Codes Assigned by Area Codes (Tables 1~16) Strata DK Programming 5/994-37 Toll Restriction Program 47 Overview This program defines exceptions to previously defined office code restrictions for up to 16 area codes, allowing six-digit Toll Restriction. Office codes entered in Tables 01~16 are opposite of what is defined for the area code by Program 46-2~4. For instance, if Program 46 denies area code 714, entering office codes 530 and 555 into an exception table for area code 714 will allow 714 to be dialed only with office codes 530 and 555. Conversely, if 714 is allowed in Program 46, then 714 + 530 or 714 + 555 will be restricted. Each area code with exception office codes requires a table. Each table may hold up to 800 exception office codes. Enter the area code and required office codes on the record sheet. For International Call Restriction by country codes, enter 011 for the area code, and Restricted country code(s) in the office table(s). To fully restrict a 2-digit country code, also Restrict the imaginary third digit of that country code. For example, to Restrict country code 81, you must Restrict 10 country codes 810 to 819.
Toll Restriction Program 48 – Station Toll Restriction Classification 4-38Strata DK Programming 5/99 Program 48 – Station Toll Restriction Classification Processor Type:DK14, DK40i, All RCTUs Program Type:Toll Restriction Initialized Default:100 for all ports 6SNU +ROG 6SNU +ROG 6SNU+ROG 6SNU+ROG ProcessorPort RangeToll Restriction Ports for DISAToll Restriction ClassProcessorPort RangeToll Restriction Ports for DISAToll Restriction Class DK14 000~009 010 1~4 RCTUBA/BB 000~079 089 1~4 DK40i 000~027 035 1~4 RCTUC/D 000~239 249 1~8 RCTUA 000~031 039 1~4 RCTUE/F 000~335 344 1~8 Port No.Digit Restriction CodeStation Restriction CodePort No.Digit Restriction CodeStation Restriction Code Station Restriction Code (00~10) 00 = No Station Toll Restriction 01 = Area Code toll Restriction and 0 or 1 as 1st digit 02 = Area Code Toll Restriction and 0 or 1 as 1st digit 03 = Class 1 07 = Class 5 04 = Class 2 08 = Class 6 05 = Class 3 09 = Class 7 06 = Class 4 10 = Class 8 If dial “0” credit card calling must be allowed, use Program 43 to assign designated stations/CO lines to allow credit card calling.SELECT = Port Number(s) Enter the port number(s) of the station(s) being defined. To add a port range, enter XXX XXX (low port high port). DATA ( 0 or 1) 0 = No digit restriction 1 = Digit restriction