Sony Ht Ct500 Operating Instructions

							31US
Getting Started When your TV does not have an HDMI jack and you want to use the TV and other components with this system, 
connect the components’ video jacks to the TV’s video jacks directly and the components’ audio jacks to the 
subwoofer’s audio jacks. However, in this case, you cannot use the GUI menu on the TV. Set up the system using 
the front panel display of the subwoofer (page 95).
 Do not turn off the system when video of the playback component is being output to the TV. If the system is not 
turned on, audio of the playback component is not output from the speaker.
 To output TV sound from the speaker connected to the subwoofer, be sure to
– connect the audio output jacks of the TV to the OPTICAL TV IN jacks or TV ASSIGNABLE AUDIO IN jacks 
of the subwoofer.
– turn off the TV’s volume.
Connecting a component to the VIDEO 1 jacks
The following illustration shows how to connect a component that has analog jacks.
Notes
Tip
EZW-T100 ANTENNA
HDMI
SPEAKERTV OUTSAT/CATV INDV D  I N
CENTER ONLY FOR SS-CT500
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLY
RL
BD IN
AM
FM
75    COAXIAL 
DMPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2 VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
DVD player (recorder), “PlayStation 2,”
satellite/cable television tuner, etc.
A
AAudio cord (not supplied)
BVideo cord (not supplied)Video signal
: Signal flowB Audio signal
Rear of the 
subwoofer
continued
 
						

							32US
Connecting a component to the VIDEO 2 IN jacks
The following illustration shows how to connect a component to the VIDEO 2 IN jacks.
You can reassign the analog audio input using the TV ASSIGNABLE AUDIO IN jacks if they are not 
used to connect to a TV. For details, see “Reassigning the audio input” (page 81).
 The DIGITAL OPTICAL IN jacks have priority over the TV ASSIGNABLE AUDIO IN jacks when you connect 
a component to the system using both jacks.
Note
EZW-T100 ANTENNA
HDMI
SPEAKERTV OUTSAT/CATV INDV D  I N
CENTER ONLY FOR SS-CT500
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRL
RL
BD IN
AM
FM
75    COAXIAL 
DMPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITALY
VIDEO 3
PB/
CBPR/
CR
DVD player (recorder), “PlayStation 2,”
satellite/cable television tuner, etc.
A
AAudio cord (not supplied)
BDigital optical cord (not supplied)
CComponent video cable (not supplied)Video signal
: Signal flow B Audio signal
Rear of the 
subwooferor
C
 
						

							33US
Getting StartedConnecting a component to the VIDEO 3 IN jacks
The following illustration shows how to connect a component to the VIDEO 3 IN jacks.
If the satellite tuner or cable television tuner, etc., does not have an OPTICAL OUT jack, connect the 
system using the COAXIAL VIDEO 3 IN jack.
 The DIGITAL COAXIAL IN jack has priority over the DIGITAL OPTICAL IN jacks when you connect a 
component to the system using both jacks.
Note
EZW-T100 ANTENNA
HDMI
SPEAKERTV OUTSAT/CATV INDV D  I N
CENTER ONLY FOR SS-CT500
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLY
RL
BD IN
AM
FM
75    COAXIAL 
DMPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
VIDEO 2
DVD player (recorder), “PlayStation 2,”
satellite/cable television tuner, etc.
C
ADigital optical cord (not supplied)
BDigital coaxial cord (not supplied)
CComponent video cable (not supplied)Video signal
: Signal flow B Audio signal
or
A
Rear of the 
subwoofer
 
						

							34US
Depending on the audio output settings of the connected component, the sound may output in 2 channel 
sound format only. In this case, set the connected component to output the sound in multi channel sound 
format (PCM, DTS, Dolby Digital). For details on audio output settings, refer to the operating 
instructions of the connected component.
Setting up the sound output of the connected component
 
						

							35US
Getting Started
The subwoofer is equipped with a function for converting video signals.
Video signals and component video signals can be output as HDMI video signals (output from the 
HDMI TV OUT jack only).
For conversion of images, see “Video input/output conversion table” (page 36).
Video input/output conversion table of the subwoofer
Notes on converting video signals
 When video signals from a VCR, etc., are converted by the subwoofer and then output to your TV, 
depending on the status of the video signal output, the image on the TV screen may appear distorted 
horizontally, or no image may be output.
 If your VCR has an image improvement circuit, such as TBC, the images may be distorted or may 
not be output. In this case, set the image improvement circuit function to off.
Function for conversion of video signals
HDMI TV OUT
HDMI IN AThe same type of signal as that of the input signal is output. Video signals are not up-
converted.
VIDEO IN B
Video signals are up-converted and output through this system.
COMPONENT 
VIDEO IN C
EZW-T100 ANTENNA
HDMI
SPEAKERTV OUTSAT/CATV INDV D  I N
CENTER ONLY FOR SS-CT500
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLY
RL
BD IN
AM
FM
75    COAXIAL 
DMPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2 VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
TV OUT
VIDEO IN
SAT/CATV INDV D  I NBD IN
Rear of the 
subwoofer
CABC Output signals
B A
Input signals
INPUT jackOUTPUT jack
continued
 
						

							36US
Video input/output conversion table
For details on the [Resolution] menu setting, see “Converting the resolution of analog video input 
signals” (page 82).
 If you select a resolution that the connected TV does not support in the [Resolution] menu, images from the TV will 
not be output correctly.
 Converted HDMI image output signals do not support “x.v.Color.”
 Converted HDMI image output signals do not support Deep Color.
[Resolution] 
menu settingHDMI TV OUT jack
AUTO (default setting) Component video
The resolution is set automatically, depending on the connected 
TV.
Video
480/576p Component video
Video signals are up-converted and output through this system. Video
720p Component video
Video
1080i Component video
Video
1080p Component video
Video
Notes
Input signals
Output from
 
						

							37US
Getting Started
Connecting the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle 
or roll up the antenna (aerial).
1Remove only the loop part from the plastic stand.
2Set up the AM loop antenna (aerial).
3Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part of the cords.
The cords can be connected to either terminal.
 Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
 Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4Make sure the AM loop antenna (aerial) is connected firmly by pulling softly on the cord.
Step 4: Connecting the antenna (aerial)
Note
Tip
EZW-T100
HDMITV OUTSAT/CATV INDV D  I N
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLYPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2 VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
ANTENNA
AM
FM
75    COAXIAL Rear of the 
subwoofer
*
continued
 
						

							38US
Connecting the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the FM 75 Ω COAXIAL jack.
 Be sure to fully extend the FM wire antenna (aerial).
 After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
 Do not use the FM wire antenna (aerial) while it is bundled up.
 Insert the FM wire antenna (aerial) fully and firmly to the terminal.
 If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the subwoofer to an outdoor 
FM antenna (aerial) as shown below.
Notes
Tip
EZW-T100
HDMITV OUTSAT/CATV INDV D  I N
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLYPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2 VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
ANTENNA
AM
FM
75    COAXIAL FM wire antenna (aerial)
(supplied)
FM 75 Ω COAXIAL jack Rear of the 
subwoofer
EZW-T100
HDMITV OUTSAT/CATV INDV D  I N
ASSIGNABLE
AUD I O I NL
R
AUD I O I NVIDEO IN COMPONENT VIDEO INRLYPORT TVREMOTE
CTRLVIDEO 1
DC 5V
0.7A MAXONLY FORSS-CT500
VIDEO 2 VIDEO 3
PB/
CBPR/
CR
OPTICAL
TV IN
COAXIAL
VIDEO 2 INVIDEO 3 IN VIDEO 3 INDIGITAL
ANTENNA
AM
FM
75    COAXIAL 
Outdoor FM antenna 
(aerial) Rear of the 
subwoofer
 
						

							39US
Getting Started
Before connecting the AC power cord (mains 
lead) of the subwoofer to a wall outlet (mains), 
connect the speaker to the subwoofer (page 25).
 After connecting the AC power cord (mains lead), 
wait about 20 seconds before turning on the power by 
pressing "/1.
 Use the system near the wall outlet (mains). Should 
you notice an abnormality in the system, disconnect 
the AC power cord from the AC outlet immediately.
When you connect the subwoofer’s HDMI TV 
OUT jack and your TV’s HDMI IN jack with the 
HDMI cable (not supplied), you can use the GUI 
menu.
By using the GUI menu, you can make various 
settings and adjustments.
You can make the settings and adjustments by 
the SYSTEM MENU as well. In that case, see 
“Using the system menu” (page 95).
Displaying the GUI menu on 
the TV screen
1Connect a TV to the subwoofer.
For details, see “Step 3a: Connecting the 
components with HDMI jacks” (page 27).
2Turn on the TV.
3Press ?/1 to turn on the system.
Step 5: Connecting the AC 
power cord (mains lead)
Note
AC power cord 
(mains lead) To a wall outlet 
(mains) Rear of the subwoofer
Step 6: Operating the 
system using the GUI
(Graphical User Interface)
MENU
TV
AVTV INPUT
BD
VIDEO1
YELLOW BLUE RED GREEN
VIDEO2 VIDEO3TUNER/
BAND
ENT/CLEAR
GUI MENU
TOOLS/
OPTIONS RETURN/
EXIT
PRESET ADVANCE REPLAY
PRESET
HOME
DISPLAY
DV DSAT/CATVDMPORTSYSTEM STANDBY?/1
GUI 
MENU
C, X, x, c, 
continued
 
						

							40US
4Switch the input selector on your TV so 
that the signal from the system appears 
on the on the TV screen.
5Press GUI MENU.
“GUI MENU” appears in the front panel 
display of the subwoofer and the GUI menu 
appears on the TV screen.
6Press X/x repeatedly to select the 
menu item you want, then press   or 
c.
Overview of the menus
The following menu items are available for each 
category.
 Input
Selects the input to the system.
For details on each input, see “Enjoying TV” 
(page 50) and “Enjoying other components” 
(page 51).
 Music
You can enjoy sound from a component 
connected to the DIGITAL MEDIA PORT 
adapter.
For details on music functions, see “DMPORT 
function” (page 53).
 Video
You can enjoy sound and image from a 
component connected to the DIGITAL MEDIA 
PORT adapter.
For details on video functions, see “DMPORT 
function” (page 53).
 FM/AM
You can listen to the radio using the system.
For details on tuner operation, see “Listening to 
FM/AM radio using the GUI menu” (page 66) or 
“Listening to FM/AM radio using the front panel 
display of the subwoofer” (page 68).
 Settings
You can use the settings menu to make 
adjustments to the system.
[Level]
You can adjust the speaker and subwoofer levels. 
For details, see “Setting the speaker level” 
(page 78).
[Surround]
You can select the sound field you want for your 
listening pleasure. For details on adjusting the 
parameters, see “Enjoying the surround effects” 
(page 57).