Samsung Ht D5530k User Manual

							English 41
03 Setup
WPS(PBC)
The easiest way to set up the wireless network 
connection is using the WPS(PBC) function or the 
One Foot Connection function.
If your wireless router has a WPS(PBC) button, 
follow these steps:
Press the ▲▼ buttons to select  WPS(PBC).
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportNetwork Settings
>
 Move    " Enter    ' Return
One Foot
Connection
Wireless
(General)Wired
Select a network connection type.
Connect to the Access Point easily by pressing the 
WPS(PBC) button. Choose this if your Access Point 
supports Push Button Confi guration(PBC).WPS(PBC)
Press the ENTER button.
Press the WPS(PBC) button on your router 
within two minutes. Your product displays 
the Network Selection Screen, and 
automatically acquires all the network 
settings values it needs and connects to your 
network. When it is done, it displays an OK  
button. Press the ENTER button on your 
remote.
One Foot Connection
You can set up the wireless connection 
automatically if you have a Samsung Wireless 
Router which supports One Foot Connection. To 
connect using the One Foot Connection function, 
follow these steps:
Press the ▲▼ buttons to select  One Foot 
Connection.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportNetwork Settings
>
 Move    " Enter    ' Return
Wireless
(General)Wired
Select a network connection type.
Connect to your wireless network automatically if your
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
within 10 inches(25cm) of Samsung Wireless LAN Adapter.One Foot
ConnectionWPS(PBC)
1.
2.
3.
1.
Press the ENTER button.
Place the Samsung Wireless Router within 
25 cm (10 inches) of Samsung Wireless LAN 
Adapter to connect.
Wait until the connection is automatically 
established.
Network Status
Check whether a connection to the network and 
the Internet have been established.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportNetwork Status
    < Move    " Enter    ' Return
MAC Address  XX:XX:XX:XX:XX:XX
IP Address  0.0.0.0
Subnet Mask  0.0.0.0
Gateway 0.0.0.0
DNS Server  0.0.0.0
Internet is connected successfully. 
If you have a problem using any Internet services, contact your Internet\λ service 
provider.
KT_WLAN
IP SettingsRetryOKNetwork Settings
BD-LIVE Internet Connection
Set to allow or prohibit an Internet connection 
when you use the BD-LIVE service.
Allow (All) : The Internet connection is allowed 
for all BD-LIVE contents.
Allow (Valid Only) : The Internet connection is 
allowed only for BD-LIVE contents containing a 
valid certifi cate.
Prohibit : No Internet connection is allowed for 
any BD-LIVE content.
NOTE
What is a valid certifi  cate?
When the product uses BD-LIVE to send the 
disc data and a request to the server to certify 
the disc, the server uses the transmitted data 
to check if the disc is valid and sends the 
certifi cate back to the product.
The Internet connection may be restricted 
while you are using BD-LIVE contents.
2.
3.
4.
•
•
•
✎


HT-D5500_ELS_1226.indd   41 HT-D5500_ELS_1226.indd   41 2011-12-26    1:24:25
2011-12-26    1:24:25
 
						

							42 English
Setup
System
Initial Settings
By using the Initial Settings function, you can set 
the language, Musical Auto Calibration, Network 
Settings, etc. 
For more information about the Initial Settings 
function, refer to the Initial Settings section of this 
user manual. (See page 28)
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers linked 
operations with other Samsung products that 
have the Anynet+ feature.
To operate this function, connect this product to 
a Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this product 
using a Samsung TV remote control and start 
disc playback simply by pressing the PLAY (►) 
button on the TV’s remote control.
For more information, please see the TV user 
manual.
Off : Anynet+ functions will not work.
On : Anynet+ functions will work.
NOTE
This function is not available if the HDMI cable 
does not support CEC.
If your Samsung TV has an Anynet+ logo, then 
it supports the Anynet+ function.
Depending on your TV, certain HDMI output 
resolutions may not work.
Please refer to the user manual of your TV.
BD Data Management
Lets you manage the downloaded contents you 
accessed through a Blu-ray Disc that supports 
the BD-LIVE service and stored on an attached 
Flash memory device.
You can check the device’s information including 
the storage size, delete the BD data, or change 
the Flash memory device. 
•
•
✎



BD Data Management Screen Information :
Current Device : Display the selected device.
Total Size : Total memory size of the device.
Available Size : Available memory in the device.
Delete BD Data : Delete all BD data in the 
storage.
Select Device : Change location of desired 
memory to store BD data.
NOTE
In the external memory mode, disc playback 
may be stopped if you disconnect the USB 
device in the middle of playback.
Only those USB devices formatted in FAT fi le 
system (DOS 8.3 volume label) are supported. 
We recommend you use USB devices that 
support USB 2.0 protocol with 4 MB/sec or 
faster read/write speed.
The Resume Play function may not work after 
you format the storage device.
The total memory available to BD Data 
Management may differ, depending on the 
conditions.
Time Zone
You can specify the time zone that is applicable 
to your area.
SettingsDisplay
Audio
Network
System
Language
Security
General
SupportTime Zone
< Change    " Save    ' Return
GMT + 00:00London, Lisbon, Casablanca
DivX® Video On Demand
Shows the registration code authorized for the 
product. If you connect to the DivX web site and 
register using that code, you can download the 
VOD registration fi le. If you activate the VOD 
registration using My Contents, the registration is 
completed.
NOTE
For more information about DivX(R) VOD, visit 
"http://vod.divx.com".
•
•
•
•
•
✎




✎
HT-D5500_ELS_1226.indd   42 HT-D5500_ELS_1226.indd   42
2011-12-26    1:24:28
2011-12-26    1:24:28
 
						

							English 43
03 Setup
Reset
All settings will revert to the default except for the 
network and Smart Hub settings. You need enter 
the password for this function.
NOTE
The default password is 0000.
Language
You can select the language you prefer for the 
Home menu, disc menu, etc.On-Screen Menu : Select the language for the 
on-screen displays.
Disc Menu : Select the language for the disc 
menu displays.
Audio : Select the language for disc audio.
Subtitle : Select the language for disc subtitles.
NOTE
The selected language will only appear if 
it is supported on the disc.
Security
This function works in conjunction with Blu-ray 
and DVD discs that have been assigned an age 
rating or numeric rating that indicates the maturity 
level of the content. These numbers help you 
control the types of Blu-ray and/DVD discs that 
your family can watch.
When you access this function for the fi rst time, 
the password setup screen appears. Enter a 
desired 4-digit password using the number 
buttons. (The default password is 0000.)
After you have set your password, select an age 
rating you want to set for the BD Parental Rating 
and a rating level you want to set for the DVD 
Parental Rating. The product will only play Blu-ray 
discs rated at or below the age rating and DVD 
discs rated below the numeric rating unless the 
password is entered. 
Larger numbers indicate more mature content.
BD Parental Rating
This will prohibit playback of Blu-ray disc rated 
above Parental Rating.
✎

•
•
•
•
✎

DVD Parental Rating
Prevent playback of DVD discs with specifi c 
numerical ratings unless a password is entered.
Change Password
Change the 4-digit password used to access 
security functions.
If you forgot your password
Remove the disc.
Press and hold the STOP ( ) button on the 
front panel for 5 seconds or more.
All settings will revert to the factory settings.
NOTE
When the factory default settings are restored, 
all the user stored BD data will be deleted.
General
Front Display
Change the brightness display of the front panel.
Auto : Dim during playback.
Dim : Dim the display window.
Bright : Brighten the display window.
NOTE
The Power button and the Function button are 
not possible to change the Brightness.
Network Remote Control
The Network Remote Control function lets you 
control your Blu-ray Home Cinema from a remote 
device such as a smart phone through a wireless 
connection to your local area network.
To use the Network Remote Control function, follow 
these steps:
Select On in the Network Remote Control 
menu.
Install the Samsung network remote control 
application to control your product on your 
compatible portable device.
Make sure your portable device and your 
product are connected to the same wireless 
router.
1.
2.
✎

•
•
•
✎

1.
2.
3.
HT-D5500_ELS_1226.indd   43 HT-D5500_ELS_1226.indd   43 2011-12-26    1:24:29
2011-12-26    1:24:29
 
						

							44 English
Setup
Start the application on your portable device. 
The application should fi nd your product and 
display it on a list.
Select the product. 
If this is the fi rst time you are using the 
function, it will ask you to allow or deny 
remote control of the product. Select Allow.
Follow the instructions that came with the 
application to control the product.
Support
Software Upgrade
The Software Upgrade menu allows you to 
upgrade the product’s software for performance 
improvements or additional services. You can 
upgrade in four ways:
By Internet
By USB
By Disc
Via download (File)
The four methods are explained below.
By Internet
To upgrade by Internet, follow these steps:
Select By Internet, and then press the 
ENTER button. The Connecting to Server 
message appears.
If there is a download available, the 
Download pop-up appears with a progress 
bar and the download starts.
When the download is complete, the 
Upgrade Query window appears with three 
choices: Upgrade Now, Upgrade Later, or 
Don’t Upgrade.
If you select Upgrade Now, the product 
upgrades the software, turns off, and then 
turns on automatically. 
If you do not make a selection in one minute 
or select Upgrade Later, the product stores 
the new upgrade software. You can upgrade 
the software later using the Via download 
function.
If you select Don’t Upgrade, the product 
cancels the upgrade.
4.
5.
6.
7.
•
•
•
• 1.
2.
3.
4.
5.
6. NOTE
Your product must be connected to the 
Internet to use the By Internet function.
The upgrade is complete when the product 
turns off, and then turns on again by itself. 
Never turn the product off or back on 
manually during the update process.
Samsung Electronics shall take no legal 
responsibility for product malfunction 
caused by an unstable Internet connection 
or consumer negligence during a software 
upgrade.
If you want to cancel the upgrade while the 
upgrade software is downloading, press the 
ENTER button.
By USB
To upgrade by USB, follow these steps:
Visit www.samsung.com/bluraysupport
Download the latest USB software upgrade 
zip archive to your computer.
Unzip the zip archive to your computer. You 
should have a single folder with the same 
name as the zip fi le.
Copy the folder to a USB fl ash drive. 
Make sure the disc tray is empty, and then 
insert the USB fl ash drive into the USB port 
of the product. 
In the product’s menu, go to Settings > 
Support > Software Upgrade.
Select By USB.
NOTE
The disc tray must be empty when you 
upgrade the software using the USB Host 
jack.
When the software upgrade is done, check 
the software details in the software Upgrade 
menu.
Do not turn off the product during the 
software upgrade. It may cause the product 
to malfunction.
Software upgrades using the USB Host jack 
must be performed with a USB memory 
fl ash stick only.
✎





1.
2.
3.
4.
5.
6.
7.
✎




HT-D5500_ELS_1226.indd   44 HT-D5500_ELS_1226.indd   44
2011-12-26    1:24:29
2011-12-26    1:24:29
 
						

							English 45
03 Setup
By Disc
To upgrade by Disc, follow these steps:
Visit www.samsung.com/bluraysupport.
Download the latest disc software upgrade 
zip archive to your computer.
Unzip the zip archive to your computer. You 
should have a single folder with the same 
name as the zip fi le.
Write the folder onto a disc. We recommend 
a CD-R or DVD-R.
Finalise the disc before you remove it from 
your computer.
Insert the disc into product.
In the product’s menu, go to Settings > 
Support > Software upgrade.
Select By Disc.
NOTE
When the system upgrade is done, check the 
software details in the software Upgrade menu.
Do not turn off the product during the Software 
Upgrade. It may cause the product malfunction.
Via download 
The Via download option lets you upgrade using a 
fi le the product downloaded earlier but you 
decided not to install immediately or a fi le 
downloaded by the product in Standby Mode (See 
Download in Standby Mode below).
To upgrade Via download, follow these steps:
If upgrade software has been downloaded, 
you will see the software version number to 
the right of Via download. 
Select Via download, and then press the 
ENTER button. 
The product displays a message asking if 
you want to upgrade. Select Yes. The 
product begins the upgrade.
When the update is complete, the product 
turns off automatically, and then turns on.
1.
2.
3.
4.
5.
6.
7.
8.
✎


1.
2.
3.
4.
NOTE
When the system upgrade is done, check the 
software details in the software Upgrade 
menu.
Do not turn off the product during the software 
Upgrade. It may cause the product to 
malfunction.
To use the Via download function, your 
product must be connected to the Internet.
Download in Standby Mode
You can set the Download in Standby Mode 
function so that the product downloads new 
upgrade software when it is in Standby mode. In 
Standby mode, the product is off, but its Internet 
connection is active. This allows the product to 
download upgrade software automatically, when 
you are not using it.
To set Download in Standby Mode, follow these 
steps:
Press the ▲▼ buttons to select Download  
in Standby Mode, and then press the 
ENTER button. 
Select On or Off.
Off : If you select Off, the product will notify 
you with a pop up message when new 
upgrade software is available.
On : If you select On, the product will 
automatically download new upgrade 
software when it is in Standby mode with 
the power off. If it downloads new upgrade 
software, the product will ask you if you 
want to install it when you turn the product 
on.
NOTE
To use the Download in Standby Mode 
function, your product must be connected to 
the Internet.
Contact Samsung
Provides contact information for assistance with 
your product.
✎



1.
2.
•
•
✎

HT-D5500_ELS_1226.indd   45 HT-D5500_ELS_1226.indd   45 2011-12-26    1:24:30
2011-12-26    1:24:30
 
						

							46 English
Basic Functions
Playing a Disc
Playback
Insert a disc into the disc slot with the disc's 
label facing up.
Press the PLAY (►) button.
Playback related buttons
PLAY ( ►) Starts playback. 
STOP (  )
Stops playback.
If you press the button 
once : The stop position is 
memorized.
If you press the button twice 
: The stop position is not 
memorized.•
•
PAUSE (  )Pauses playback.
NOTE
For some discs, pressing the  STOP (  ) 
button once may not memorize the stop 
position.
Video fi les with high bit rates of 20Mbps or 
more strain the product’s capabilities and 
may stop playing during play back.
Disc Structure
The content of discs are usually divided as shown 
below.
Blu-ray Disc, DVD-VIDEO
title 1 title 2chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
1.
2.
✎


•
Audio CD (CD-DA)
track 1 track 2 track 3 track 4 track 5
MP3, WMA, DivX, MKV and MP4
folder (group) 1folder (group) 2
fi le 1 fi le 2 fi le 1 fi le 2 fi le 3
Playing a 2D video in 3D mode     
hZ
You can enjoy an ordinary 2D video in 
3D mode.
NOTE
If you move to the Home or Smart 
Hub Home menu in 3D mode, it will switch 
to 2D automatically.
Using the Disc menu/Title menu/  Popup menu
Using the Disc Menu     
hZ
During playback, press the DISC 
MENU  button on the remote 
control.
Press the 
\b◄ ► buttons to make 
a selection, and then press the 
ENTER button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
•
•
✎

1.
2.
✎

DISC MENU
HT-D5500_ELS_1226.indd   46 HT-D5500_ELS_1226.indd   46 2011-12-26    1:24:30
2011-12-26    1:24:30
 
						

							English 47
04 Basic Functions
Using the Title Menu     
Z
During playback, press the TITLE 
MENU button on the remote 
control.
Press the 
\b◄ ► buttons to 
make the desired selection, then 
press the ENTER button.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
The Title Menu will only be displayed if there 
are at least two titles on the disc.
Using the Popup Menu 
h
During playback, press the POPUP  
button on the remote control.
Press the 
\b◄ ► buttons or 
ENTER button to select the desired 
menu.
NOTE
Depending on the disc, the menu items may 
differ and this menu may not be available.
Playing the Title List   
z
During playback, press the DISC 
MENU or TITLE MENU button.
Press the 
\b buttons to select 
an entry you want to play from 
Title List, then press the ENTER  
button.
1.
2.
✎


1.
2.
✎

1.
2.
Using the Search and Skip Functions
During playback, you can search quickly through 
a chapter or track, and use the skip function to 
jump to the next selection.
Searching for a Desired Scene
hzZyx
During playback, press the SEARCH () 
button.
Each time you press the SEARCH () 
button, the playback speed will change as 
follows.
BD-ROM, 
BD-RE/-R, 
DVD-RW/-R, 
DVD+RW/+R, DVD-VIDEO )
 1 
 )
 2 
 )
 3 
 
)  4 
)
 5 
 )
 6 
 )
 7
(  1 
 (
 2 
 (
 3 
 
(  4 
(
 5 
 (
 6 
 (
 7
DivX, MKV, MP4 )
 1 
 )
 2 
 )
 3
(  1 
 (
 2 
 (
 3
To return to normal speed playback, press the 
PLAY (► ) button.
NOTE
No sound is heard during search mode.
If you press the 
 or  button too quickly 
this product might think you are just holding 
the button down.  This will lead to improper 
operation, be sure to not press these buttons 
too rapidly.
Skipping Chapters
hzZyx
During playback, press the SKIP (#$) 
button.
If you press the SKIP ($ ) button, it moves to 
the next chapter.
If you press the SKIP (# ) button, it moves to 
the beginning of the chapter. One more press 
makes it move to the beginning of the previous 
chapter.
•
•
✎


•
TITLE MENU
POPUP
TITLE MENU
POPUP
DISC MENU
TITLE MENU
POPUP
HT-D5500_ELS_1226.indd   47 HT-D5500_ELS_1226.indd   47 2011-12-26    1:24:31
2011-12-26    1:24:31
 
						

							48 English
Basic Functions
Slow Motion Play/Step Motion Play
Slow Motion Play
hzZyx
In pause (  ) mode, press the SEARCH () 
button.
If you press the SEARCH ( ) button, the 
playback speed is reduced to
*  1/8 *  1/4 * 1/2
To return to normal speed playback, press the 
PLAY (►  ) button.
NOTE
No sound is heard during slow mode.
Slow motion operates only in the forward 
direction.
Step Motion Play
hzZyx
In pause mode, press the PAUSE (   ) button.
Each time the PAUSE (   ) button is pressed, a 
new frame will be appear.
To return to normal speed playback, press the 
PLAY ( ►  ) button.
NOTE
No sound is heard during step mode. 
Step motion operates only in the forward 
direction.
Repeat Playback
Repeat the Title or Chapter
hzZyx
Repeat the disc title or chapter.
During playback, press the REPEAT  
button on the remote control.
Press the ▲▼ buttons to select 
Chapter or Title, then press the 
ENTER button.
•
•
✎


•
•
✎


1.
2.
Repeat > Off
To return to normal play, press the REPEAT  
button again.
Press the ▲▼ buttons to select Off, the 
press the ENTER button.
NOTE
Depending on the disc, the Repeat function 
may not be available.
Repeat the Section
hzZy
During playback, press the REPEAT  
button on the remote control.
Press the ▲▼ buttons to select 
Repeat A-B.
Repeat > Repeat A-B : Off  " Mark A
Press the ENTER button at the point where 
you want repeat play to start (A).
Press the ENTER button at the point where 
you want repeat play to stop (B).
To return to normal play, press the REPEAT  
button again.
Press the ENTER button.
NOTE
If you set point (B) before 5 seconds has 
lapsed, the prohibition message will appear.
Depending on the disc, the Repeat function 
may not be available.
3.
4.
✎

1.
2.
3.
4.
5.
6.
✎


REPEAT
REPEAT
HT-D5500_ELS_1226.indd   48 HT-D5500_ELS_1226.indd   48 2011-12-26    1:24:33
2011-12-26    1:24:33
 
						

							English 49
04 Basic Functions
Using the TOOLS button
During playback, you can operate disc 
menu by pressing the 
TOOLS button.
TOOLS Menu Screen
Tools
      <
 Change    " Enter   ' Return
Title Search    1/2
Chapter Search  :  1/20
Time Search  : 00:00:13/01:34:37
Picture Settings  :  Normal
Audio  :  1/4 ENG Multi CH
User EQ
Subtitle : 0/7 Off
Angle : 1/1
NOTE
Depending on the disc, the TOOLS menu 
may differ.
Moving to a Desired Scene Directly
hzZy
During playback, press the TOOLS button.
Press the ▲▼ buttons to select Title 
Search, Chapter Search or Time Search.
Enter the desired Title, Chapter or Playing 
Time using the number buttons, then press 
the ENTER button.
Selecting the Audio Language
hzZx
During playback, press the TOOLS button.
Press the ▲▼ buttons to select  Audio.
Press the ENTER button.
Press the ▲▼ buttons to select the audio 
language you want.
NOTE
The ◄► indicator will not be displayed on the 
screen if the BONUSVIEW section does not 
contain any BONUSVIEW audio settings.
•
✎ ▪
1.
2.
3.
1.
2.
3.
4.
✎

Information about the primary / secondary 
mode will be also displayed if the Blu-ray Disc 
has a BONUSVIEW section.
Use the ◄► button to switch between 
primary and secondary audio modes.
This function depends on what audio 
languages are encoded on the disc and may 
not be available.
Some Blu-ray Discs may allow you to select 
either the multi-channel LPCM or Dolby digital 
audio soundtrack in English.
Selecting the Subtitle Language
hZx
During playback, press the TOOLS button.
Press the ▲▼ buttons to select  Subtitle.
Press the ◄► buttons to select the desired 
subtitle language.
NOTE
Depending on the Blu-ray Disc / DVD, you may 
be able to change the desired subtitle in the 
Disc Menu.
Press the DISC MENU button.
This function depends on what subtitles are 
encoded on the disc and may not be available 
on all Blu-ray Discs/DVDs.
Information about the primary / secondary 
mode will also be displayed if the Blu-ray Disc 
has a BONUSVIEW section.
This function changes both the primary and 
secondary subtitles at the same time.
The total number of subtitles is the sum of the 
primary and secondary ones.



1.
2.
3.
✎





TOOLS
HT-D5500_ELS_1226.indd   49 HT-D5500_ELS_1226.indd   49 2011-12-26    1:24:38
2011-12-26    1:24:38
 
						

							50 English
Basic Functions
Caption Function
x
You must have some experience with video 
extraction and editing in order to use this 
feature properly.
To use the caption function, save the caption 
fi le (*.smi) in the same fi le name as that of the 
DivX media fi le (*.avi) within the same folder.
Example. Root Samsung_007CD1.avi
     Samsung_007CD1.smi
Up to 60 alphanumeric characters or 30 East Asian 
characters (2 byte characters such as Korean and 
Chinese) for the fi le name.
Changing the Camera Angle
hZ
When a Blu-ray Disc/DVD contains multiple 
angles of a particular scene, you can use the 
ANGLE function.
During playback, press the TOOLS button.
Press the ▲▼ buttons to select Angle.
Press the ◄► buttons to select the desired 
Angle.
Selecting the Picture Settings
hzZy
This function enables you to adjust video quality.
During playback, press the TOOLS button.
Press the ▲▼ buttons to select  Picture 
Settings, then press the ENTER button.
Press the ◄► buttons to select the desired 
Mode.
Dynamic : Choose this setting to increase 
Sharpness.
Normal : Choose this setting for most 
viewing applications.
Movie : This is the best setting for watching 
movies.
•
•
•
1.
2.
3.
1.
2.
3. •
•
•
User : The user can adjust the Sharpness, 
Noise reduction, Contrast, Brightness, 
Color, Tint function respectively.
NOTE
If the system is connected to a BD Wise-
compliant TV that has set BD Wise to On, the 
picture setting menu will not appear.
Setting the BONUSVIEW
h
The BONUSVIEW feature allows you to view 
additional content (such as commentaries) in a 
small screen window while the movie is playing.
This function is only available if the disc has the 
bonusview feature. 
Primary a audio/videoSecondary a audio/video
During playback, press the TOOLS button.
Press the ▲▼ buttons to select  BONUSVIEW 
Video or BONUSVIEW Audio.
Press the ◄► buttons to select the desired 
bonusview.
NOTE
If you switch from BONUSVIEW Video, 
BONUSVIEW Audio will change automatically 
in accordance with BONUSVIEW Video.
Tools
BONUSVIEW Video    Off 
BONUSVIEW Audio :  0/1 Off
Picture Settings   
   <
 Change  " Enter
•
✎

1.
2.
3.
✎

HT-D5500_ELS_1226.indd   50 HT-D5500_ELS_1226.indd   50 2011-12-26    1:24:40
2011-12-26    1:24:40