NEC Neax 2400 Imx Callcenterworx Enterprise Acd System Manual

							CHAPTER 7 NDA-24282 (E)
Pag e 3 62
Revision 1.0
ACNOL: Assignment of Conversion Number Data for LDM
ACNOL: Assignment of Conversion Number Data for LDM
1. Function
ACNOL is used to direct a specified ringdown type trunk route to a specific monitored number (monitored
number is the same as a pilot number) in Telephone number. The conversion number programmed in
ACNOL is available for the self node only.
Note:This command does not apply to self-directing type trunks (i.e. DID, TIE Lines, etc.).
2. Precautions
1. Prior to this command, program the monitored number by AMNOL and ACDPLT.
2. Assign the logical route number against each physical route number in ALRTL.
3. Do not program the Direct-in Termination service data against the route assigned by this command.
3. Parameters
LGRT: Logical Route Number 1-254 (Must be Ring Down Trunk)
UGN: User Group Number of Monitored Number (Fixed “1”)
L_MNO: Telephone number of Local Monitored Number (as programmed in AMNOL) 
						

							NDA-24282 (E) CHAPTER 7
Page 363
Revision 1.0
ACNOL: Assignment of Conversion Number Data for LDM
Conversion Number Data (LDM) Programming Sheet
LOGICAL
ROUTE NUMBER
(LGRT)
1 ~ 254USER GROUP
NUMBER
(UGN)LOCAL MONITORED NUMBER
(L_MNO)
Max. 5 digits 
						

							CHAPTER 7 NDA-24282 (E)
Pag e 3 64
Revision 1.0
ACNON: Assignment of Conversion Number Data for NDM
ACNON: Assignment of Conversion Number Data for NDM
1. Function
ACNON is used to direct a specified ringdown type trunk route to a specific monitored number (monitored
number is the same as a pilot number) in Telephone number. The monitored number is available for all
nodes within Fusion network.
Note:This command does not apply to self-directing type trunks (i.e. DID, TIE Lines, etc.).
2. Precautions
1. Prior to this command, program the monitored number by AMNON and ACDPLT.
2. Assign the logical route number against each physical route number in ALRTN.
3. Do not program the Direct-in Termination service data against the route assigned by this command.
3. Parameters
LGRT: Logical Route Number 1-254 (Must be Ring Down Trunk)
UGN: User Group Number of Monitored Number (Fixed “1”)
N_MNO: Telephone number of Network Monitored Number (as programmed in AMNON) 
						

							NDA-24282 (E) CHAPTER 7
Page 365
Revision 1.0
ACNON: Assignment of Conversion Number Data for NDM
Conversion Number Data (NDM) Programming Sheet
LOGICAL
ROUTE NUMBER
(LGRT)
1 ~ 254USER GROUP
NUMBER
(UGN)NETWORK MONITORED NUMBER
(N_MNO)
Max. 5 digits 
						

							CHAPTER 7 NDA-24282 (E)
Pag e 3 66
Revision 1.0
AADT: Assignment of Announcement/Dictation Trunks
AADT: Assignment of Announcement/Dictation Trunks
1. Function
This command is used to assign, display and delete announcement trunks for delay announcements, night
announcements, etc. Also used to assign, display and delete Dictation Trunks for such purposes as
Emergency Recorder.
2. Precautions
Before LENS of announcement trunks or night announcement is changed in ATRK, the AADT command
data should be deleted. In addition, if LENS data is deleted in ATRK by accident, this command data is also
deleted automatically.
3. Parameters
TYPE: 1 = ANT (Announcement Trunk)
2 = DCT (Dictation Trunk)
NO: ANT/DCT Number
Announcement = 1 ~ 58
Dictation = 1 ~ 5
D: Availability of Disconnect Timer (Available for TYPE = 1)
0 = Disconnect timer not available
1 = Disconnect timer available (normal) 
Note 1
MSGT: Message Timer (2 ~ 120 sec. 2-sec. interval when shorter than 30 sec. 8-sec. interval
when longer than 30 sec.)
CP: Connection Pattern 
Note 2
0 = Multiple Connection
1 = Single Connection
WAIT: Waiting Timer (0~30sec. 2sec. interval) 
Note 2
CNT: Number of Announcement/Dictation Trunks (1 ~ 8)
RT: Route Number (1 ~ 255)
TK: Trunk Number (1 ~ 255)
Note 1:When D=1, msg disconnect timer is set at 30 seconds.
Note 2:Available only when the system data is programmed that the DAT control function is available (ASYD,
SYS1, INDEX449, b2 = 1). 
						

							NDA-24282 (E) CHAPTER 7
Page 367
Revision 1.0
AADT: Assignment of Announcement/Dictation Trunks
Announcement/Dictation Trunks Data Programming Sheet
ANT/
DCT
(TYPE)
1/2ANT/DCT
NUMBER
ANT = 1 ~ 58
DCT = 1 ~ 5DISCON-
NECT TIMER
AVAILABLE
(D)
0/1MES-
SAGE
TIMER
(MSGT)
2 ~ 120CONNEC-
TION
PAT T E R N
(CP)
0/1WAITING
TIMER
(WAIT)
0 ~ 30NUMBER
OF 
TRUNKS
(CNT)
1 ~ 8ROUTE
NUM-
BER
(RT)
1 ~ 255TRUNK 
NUMBER
(TK)
1 ~ 255 
						

							CHAPTER 7 NDA-24282 (E)
Pag e 3 68
Revision 1.0
AADTN: Assignment of Announcement/Dictation Trunks for NDM
AADTN: Assignment of Announcement/Dictation Trunks for NDM
1. Function
This command is used to assign, display and delete announcement trunks for delay announcements, night
announcements, etc. Also used to assign, display and delete Dictation Trunks for such purposes as
Emergency Recorder. The announcement trunk or dictation trunk programmed in AADTN is allowed to
use from the remote ACD node within Fusion Network.
2. Precautions
Before LENS of assignment trunks or night announcement is changed in ATRK, the AADTN command
data should be deleted first. In addition, if LEN data is deleted in ATRK by accident, this command data is
also deleted automatically.
3. Parameters
TYPE: 1 = ANT (Announcement Trunk)
2 = DCT (Dictation Trunk)
NO: ANT/DCT Number
Announcement = 1 ~ 58
Dictation = 1 ~ 5
D: Availability of Disconnect Timer (Available for TYPE = ANT)
0 = Disconnect timer not available
1 = Disconnect timer available (normal) 
Note 1
MSGT: Message Timer (2 ~ 120 sec. 2-sec. interval when shorter than 30 sec. 8-sec. interval
when longer than 30 sec.)
CP: Connection Pattern 
Note 2
0 = Multiple Connection
1 = Single Connection
WAIT: Waiting Timer (0~30sec. 2sec. interval) 
Note 2
CNT: Number of Announcement/Dictation Trunks (1 ~ 8)
LGRT: LOGICAL Route Number (1 ~ 254)
TK: Trunk Number (1 ~ 255)
Note 1:When D=1, msg disconnect timer is set at 30 seconds.
Note 2:Not available since the DAT control function is not available in Fusion network. Always assign “0”=ASYD,
SYS1, INDEX449, b2 for the announcement to be provided in Fusion network.
Note 3:For Fusion network, DAT control function is not available. 
						

							NDA-24282 (E) CHAPTER 7
Page 369
Revision 1.0
AADTN: Assignment of Announcement/Dictation Trunks for NDM
Announcement/Dictation Trunks Data (NDM) Programming Sheet
ANT/DCT
(TYPE)
1/2ANT/DCT
NUMBER
ANT = 1 ~ 58
DCT = 1 ~ 5DISCONNECT 
TIMER
AVAILABLE
(D)
0/1MESSAGE
TIMER
(MSGT)
2 ~ 120NUMBER
OF TRUNKS
(CNT)
1 ~ 8LOGICAL
ROUTE
NUMBER
(LGRT)
1 ~ 254TRUNK 
NUMBER
(TK)
1 ~ 255 
						

							CHAPTER 7 NDA-24282 (E)
Pag e 3 70
Revision 1.0
ALGNN: Assignment of Telephone Number Data for NDM
ALGNN: Assignment of Telephone Number Data for NDM
1. General
This command assigns the individual attendant identification number for Fusion service. The data assigned
by this command is written in Network Data Memory (NDM) of the Network Control Node (NCN),
updating the NDM at each Local Node (LN). 
2. Precautions
1. The applicable tenant number (TN)  range is designated by the ASYDN command, SYS 1, INDEX 8. If
the numbering plan is common for all tenants (ASYDN, SYS1, INDEX 800, bit0 = 1), assign TN
parameter as “1” for all tenants.
2. The system data assignment (ASYDN, SYS 1, INDEX 514, bit1 = 1) is needed to provide the Network
Data Memory (NDM).
3. Before assigning this command, ANPDN/ASPAN commands are required for the numbering plan of the
Telephone Number (TELN). 
4. A unique Telephone Number (TELN) should be given within a User Group Number (UGN).
5. For more detail, see the NEAX2400 IMX Fusion Network System Manual.
3. Data Entry Instructions
Note:All monitored (Pilot) numbers must be added here and in AMNON for Fusion Network.
USER GROUP
NUMBER (UGN)TELEPHONE STATION NUMBER (TELN)
MAX. 16 DIGITSREMARKS
1 40000
1 40001
1 40002
UGN
1 = User Group Number 1 (Fixed)
TELN
Assign Telephone Number (Unique TELN should be
given within a UGN) 
						

							NDA-24282 (E) CHAPTER 7
Page 371
Revision 1.0
ALGNN: Assignment of Telephone Number Data for NDM
4. Data Sheet
USER GROUP NUMBER
(UGN)TELEPHONE STATION NUMBER 
(TELN)
MAX. 16 DIGITSREMARKS
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1