Lucent Technologies Definity Release 8.2 Atm Installation Manual

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xi Resources 
Where To Call for Technical Support
Use the telep hone numb ers in Table 1 for the reg ion in whic h the system is b eing  
installed .
Table 1. Technical support contact numbers
Te l e p h o n e  N u m b e r
DEFINITY Help line (feature ad ministration and  system 
applications)1-800-225-7585
Luc ent Tec hnolog ies Toll Fraud  Intervention 1-800-643-2353
Luc ent Tec hnolog ies National Customer Care Center (ATM 
c ustomers)1-800-242-2121
Luc ent Tec hnolog ies Corp orate Sec urity 1-800-822-9009
Streamlined  Imp lementation (for missing  eq uip ment) 1-800-772-5409
USA/Canada Tec hnic al Servic e Center (ATM tec hnic ians) 1-800-248-1234
NetCare®  Professional Servic es (NPS) 1-800-237-0016
International Tec hnic al Assistanc e (ITAC) 1-303-804-3777
Luc ent Tec hnolog ies Centers of Exc ellenc e
Asia/Pac ific  Reg ional Sup p ort Center 65-872-8686
Western Europ e/Mid d le East/South Afric a 44-1252-77-4800 
Central/Eastern Europ e 361-345-4334
Central/Latin Americ a Carib b ean 1-303-804-3778
Australia 61-2-9352-9090
North Americ a (INADS Datab ase Ad ministration) 1-800-248-1111 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xii Antistatic Protection 
Antistatic Protection
!WARNING:
To minimize elec trostatic  d isc harge (ESD), always wear an authorized  wrist 
g round  strap  when hand ling c irc uit p ac ks or any c omp onents of a 
DEFINITY System. Connec t the strap  to an ap p roved ground  suc h as an 
unp ainted  metal surfac e on the DEFINITY ECS switc h.
Remove/Install Circuit Packs
!CAUTION:
The c ontrol c irc uit p ac ks with white lab els c annot b e removed  or installed  
when the power is on. The port circuit packs with gray labels (older version 
circuit packs had purple labels) can be removed or installed when the 
p ower is on.
Security
To ensure the g reatest sec urity possible, Luc ent Tec hnolog ies offers servic es that 
can reduce toll fraud liabilities. Contact your Lucent Technologies representative 
for more sec urity information.
Log in sec urity is an attrib ute of the DEFINITY ECS software. Advise c ustomers 
that their existing  password s exp ire 24 hours after the up g rade. Also exp lain that 
the new password s must c onform to stric t req uirements.
System ad ministrators must keep network ad dresses c onfid ential. A PPN or any 
end p oint masq uerad ing  as a PPN on the ATM network c an seize that EPN and  
c ontrol it if that EPN is not alread y c onnec ted  to its p rop er PPN.
Trademarks
This d oc ument c ontains referenc es to the following  Luc ent Tec hnolog ies 
trad emarked prod uc ts:
nACCUNET®
nAUDIX®
nCallmaster®
nCallVisor®
nC O N VERSA N T®
nDEFINITY®
nFO RU M™ 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xiii Standards Compliance 
nMEGACOM®
nSYSTI M A X®
nTRA N STA L K™
The following prod uc ts are trad emarked  b y their c orresp ond ing  vend or:
nAud ic hron® is a reg istered  trad emark of Aud ic hron Comp any
nLINX™ is a trad emark of Illinois Tool Works, Inc .
nWind ows95/98/NT is a trad emark of Mic rosoft Corp oration
nMusic  Mate® is a reg istered  trad emark of Harris Corp oration
nPa g e Pa c® is a reg istered  trademark of Harris Corp oration, Drac on 
Division
nShoc kwatc h® is a reg istered  trad emark of Med ia Rec overy, Inc orp orated
nStyrofoam® is a reg istered  trad emark of Styrofoam Corp oration
nTi l t w a t c h® is a reg istered  trad emark of Med ia Rec overy, Inc orp orated
nZone Mate® is a reg istered trad emark of Harris Corp oration 
Standards Compliance
The eq uip ment in this d oc ument c omp lies with:
nITU-T (Formerly CCITT)
nEC M A
nETSI
nIPNS
nDPNSS
nNational ISDN-1
nNational ISDN-2
nISO-9000
nANSI
nFCC Part 15 and Part 68
nEN55022
nEN50081
nEN50082
nUNI 3.1
nC I SPR2 2
nAustralia AS3548 (AS/NZ3548) 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xiv LASER Product 
nAustralia AS3260
nIEC 825
nIEC 950
nUL1459
nUL 1950
nCSA C222 Number 225
nTS0 0 1
nILMI 3.1 
LASER Product
The DEFINITY ECS switc h may c ontain a Class 1 LASER d evic e (IEC 825 1993) if 
sing le-mod e fib er op tic  c ab le is c onnec ted  to a remote exp ansion p ort network 
(EPN). The laser d evic e op erates within the following  p arameters:
!DANGER:
Use of c ontrols or adjustments or p erformanc e of p roc ed ures other than 
those specified herein may result in hazardous radiation exposure.
Contac t your Luc ent Tec hnolog ies rep resentative for more information.
Electromagnetic Compatibility 
Standards
This p rod uc t c omp lies with and  c onforms to the following :
nLimits and  Methods of Measurements of Rad io Interferenc e 
Charac teristic s of Information Tec hnolog y Eq uipment, EN55022 
(CISPR22), 1993
nEN50082-1, Europ ean Generic  Immunity Standard
nFCC Part 15
nAustralia AS3548
NOTE:
The DEFINITY system c onforms to Class A (ind ustrial) equip ment. Voic e 
terminals meet Class B requirements. Power output Wavelength Mode field diameter
-5 d Bm 1310 nm 8.8 mm 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xv Electromagnetic Compatibility Standards 
nElec trostatic  Disc harg e (ESD) IEC 1000-4-2
nRad iated  rad io freq uenc y field  IEC 1000-4-3
nElec tric al Fast Transient IEC 1000-4-4
nLightning  effec ts IEC 1000-4-5
nConduc ted radio freq uenc y IEC 1000-4-6
nMains freq uenc y mag netic  field  IEC 1000-4-8
nLow freq uenc y mains d isturb anc e 
The system c onforms to the following :
nElec tromag netic  Comp atib ility General Immunity Stand ard , p art 1; 
Resid ential, Commerc ial, Light Ind ustry, EN50082-1, CENELEC, 1991
nIssue 1 (1984) and  Issue 2 (1992), Elec trostatic  Disc harge Immunity 
Req uirements (EN55024, Part 2) IEC 1000-4-2
nRad iated  Rad io Freq uenc y Field  Immunity Req uirements IEC 1000-4-3
nElec tric al Fast Transient/Burst Immunity Req uirements IEC 1000-4-4
European Union Standards
Luc ent Tec hnolog ies Business Communic ations Systems d ec lares that the 
DEFINITY eq uip ment sp ec ified  in this d oc ument b earing  the “ CE”  mark c onforms 
to the Europ ean Union Elec tromag netic  Compatib ility Direc tives. 
The “ CE”  (Conformité Europ eénne) mark ind ic ates c onformanc e to the Europ ean 
Union Elec tromag netic  Comp atib ility Direc tive (89/336/EEC) Low Voltag e 
Direc tive (73/23/EEC) and  Telec ommunic ation Terminal Eq uip ment (TTE) 
Direc tive (91/263/EEC) and  with i-CTR3 Basic  Rate Interfac e (BRI) and  i-CTR4 
Primary Rate Interfac e (PRI) as ap p lic able. 
The “ CE”  mark is ap plied  to the following  p roduc ts:
nGlob al AC-p owered  Multic arrier Cab inet (MCC) with 25-Hz and  50-Hz ring  
g enerator
nDC-p owered  Multic arrier Cab inet (MCC) with 25-Hz ring  g enerator
nAC-p owered  Enhanc ed  Sing le-Carrier Cab inet (ESCC) with 25-Hz ring  
g enerator
nAC-p owered  Comp ac t Sing le-Carrier Cab inet (CSCC) with 25-Hz ring 
g enerator
nAC-p owered  Comp ac t Modular Cab inet (CMC) with 25-Hz and  50-Hz ring  
g enerator (for Franc e)
nEnhanc ed DC Power System 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xvi Federal Communications Commission Statement 
Federal Communications Commission 
Statement
Part 68: Statement
Part 68: Answer-Sup ervision Sig naling . Allowing  this eq uip ment to b e op erated in 
a manner that d oes not p rovid e p rop er answer-sup ervision sig naling is in 
violation of Part 68 rules. This equip ment returns answer-sup ervision sig nals to 
the p ub lic  switc hed network when:
nAnswered  b y the c alled  station
nAnswered  b y the attend ant
nRouted  to a rec ord ed  announc ement that c an b e ad ministered  b y the CPE 
user
This eq uip ment returns answer-sup ervision sig nals on all domestic  DID c alls 
forward ed  b ac k to the p ub lic  switc hed  telep hone network. Permissib le 
exc ep tions are: 
nA c all is unanswered
nA b usy tone is rec eived
nA reorder tone is rec eived
Luc ent Tec hnolog ies attests that this reg istered  eq uipment is c ap ab le of 
p rovid ing  users ac c ess to interstate p rovid ers of op erator servic es throug h the 
use of ac c ess c od es. Modific ation of this eq uip ment b y c all ag g reg ators to b loc k 
ac c ess d ialing  c od es is a violation of the Telep hone Op erator Consumers Ac t of 
1990.
This eq uip ment c omp lies with Part 68 of the FCC Rules. On the rear of this 
eq uip ment is a lab el that c ontains, among other information, the FCC reg istration 
numb er and  ring er eq uivalenc e numb er (REN) for this eq uip ment. If req uested , 
this information must b e p rovid ed  to the telep hone c omp any. 
The REN is used  to d etermine the q uantity of d evic es whic h may b e c onnec ted  
to the telep hone line. Exc essive RENs on the telep hone line may result in d evic es 
not ring ing  in resp onse to an inc oming  c all. In most, b ut not all areas, the sum of 
RENs should  not exc eed  5.0. To be c ertain of the numb er of d evic es that may b e 
c onnec ted  to a line, as d etermined  b y the total RENs, c ontac t the loc al telep hone 
c omp any.
NOTE:
REN is not req uired  for some typ es of analog  or d ig ital fac ilities. 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xvii Federal Communications Commission Statement 
Means of connection
Connec tion of this equip ment to the telep hone network is shown in the following  
tab le.
If the terminal eq uip ment (DEFINITY
® System) c auses harm to the telep hone 
network, the telep hone c omp any will notify you in ad vanc e that temp orary 
d isc ontinuanc e of servic e may b e req uired . But if ad vanc e notic e is not prac tic al, 
the telep hone c omp any will notify the c ustomer as soon as p ossib le. Also, you 
will be ad vised  of your rig ht to file a c omp laint with the FCC if you b elieve it is 
nec essary.
The telep hone c omp any may make c hang es in its fac ilities, eq uip ment, 
op erations or proc ed ures that c ould  affec t the op eration of the equip ment. If this 
happens, the telephone c ompany will provide advance notice in order for you to 
make nec essary mod ific ations to maintain uninterrup ted  servic e.
If troub le is exp erienc ed  with this eq uip ment, for rep air or warranty information, 
p lease c ontac t the Tec hnic al Servic e Center at 1-800-242-2121. If the eq uip ment 
is c ausing  harm to the telep hone network, the telep hone c omp any may req uest 
that you d isc onnec t the eq uip ment until the p rob lem is resolved .
It is rec ommend ed  that Luc ent Tec hnolog ies-c ertified  tec hnic ians p erform the 
rep airs.
The eq uip ment c annot b e used on p ublic  c oin p hone servic e p rovid ed  b y the 
telep hone c omp any. Connec tion to p arty line servic e is sub jec t to state tariffs. 
Contac t the state p ub lic  utility c ommission, p ub lic  servic e c ommission or 
corporation commission for information.
This eq uip ment, if it uses a telep hone rec eiver, is hearing -aid c ompatib le.Manufacturer ’s
Port Identifier FIC CodeSOC/REN/
A.S. Code Network Jacks
Off/On Premises Station OL13C 9.0F RJ2GX, 
RJ 2 1 X,  RJ 1 1 C
DID trunk 02RV2-T 0.0B RJ2GX, RJ21X
CO trunk 02GS2 0.3A RJ21X
CO trunk 02LS2 3.0A RJ21X
Tie trunk TL31M 9.0F RJ2GX
1.544 d ig ital Interfac e 04DU9-B,C 6.0F RJ48C, RJ48M
1.544 d ig ital Interfac e 04DU9-BN,KN 6.0F RJ48C, RJ48M
2.048 d ig ital Interfac e 04DU9-BN,KN 6.0F RJ48C, RJ48M
120A2 c hannel servic e unit 04DU9-DN 6.0F RJ48C 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
About This Book 
xviii Federal Communications Commission Statement  
						

							Preparing for Installation and Upgrades 
1-1  
1
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
1
Preparing for Installation and 
Upgrades
This c hapter c ontains information on p rep aring  for the installation or up g rad e to 
Release 8 ATM Port Network Connec tivity (ATM-PNC) and  ATM Circ uit Emulation 
Se r vi c e  (ATM - C ES).
Common ac tivities to either install or upg rad e new ATM-PNCs or ATM-CESs 
inc lud e:
nRequest Address Information
nReview Configuration and Equipment
nDetermine ATM Switch Suitability
nSchedule Installation or Upgrade
Prep aring  for a DEFINITY ATM switc h installation or up g rad e involves 
c oord inating  the efforts among  the following  peop le and  organizations:
nThe customer
nThe p rojec t manag er
nNetCare®  Professional Servic es (NPS)
nLuc ent Tec hnic al Servic e Center (TSC) or Glob al Strateg ic  Op p ortunities 
(GSO) Division
nATM switch technician
nLuc ent c hannel p artner, if app lic ab le 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Preparing for Installation and Upgrades 
1-2 Request Address Information 
1
Request Address Information
The c omp lete DEFINITY ECS translations req uire p rec utover ad ministration, 
which, in turn, requires a customer address scheme, specific ally the ATM 
ad d resses for theTN2305/TN2306 ATM interfac e c irc uit pac k(s). The add ress of 
the EPN is automatic ally read  b y the loc al ATM switc h, using  the add ress 
reg istration p roc ed ure d efined  in Integ rated  Loc al Manag ement Interfac e (ILMI). 
If field tec hnic ians d o not have the log in p ermissions req uired  to ob tain the EPN’s 
ATM ad d ress(es) d irec tly from the ATM switc h(es), the c ustomer or ATM switc h 
installer must provid e that information.