Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Release 8.2 Atm Installation Manual
Lucent Technologies Definity Release 8.2 Atm Installation Manual
Have a look at the manual Lucent Technologies Definity Release 8.2 Atm Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-13 Administering DEFINITY ECS 5 11. Set the sync hronizationSe t t h e Synchronization Capable field to n (default). NOTE: Up to 44 b oards may b e d esignated sync hronization c ap ab le on R8r and 3 b oard s on R8si, R8c si, R8c. If you enter y in this field when the maximum numb er of b oard s has been d esignated , the system returns: Maximum number of Synchronization Capable boards already administered NOTE: If this ATM trunk c ircuit p ack is a synchronization sourc e, set the field to y. If you c hang e the field to n when the circ uit p ac k is ad ministered as a sync hronization sourc e, the system returns: Cannot remove synchronization source. 12. Ad minister the signaling groupTy p e add signaling-group and p ress Enter. The Sig naling Group sc reen (Screen 3-3 ) d isp lays. Set the following field s (tabb ing g oes vertic ally) 13. Set the g roup typ e Set the Group Type field to atm. 14. Typ e p ort ad d ress Typ e the D-channel (sig naling c hannel) p ort ad d ress for this new signaling group in UUCSSppp sc reen at (3-dig its required for port addresses). This address must match the slot and p ort numb er on an ATM-Interface circ uit p ac k. 15. Type a name Typ e a name in the Name field (15 alp ha-numeric c haracters). 16. Set VPI The Virtual Path Identifier (VPI) field is set to 0 and is not ad ministrab le. Table 5-8. ATM-CES administration — Continued ÖStep Action Description Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-14 Administering DEFINITY ECS 5 17. Set VCI Set the Virtual Channel Identifier (VCI) field (32-1023). This numb er must b e uniq ue among sig naling g roup s that share the same ATM c irc uit pac k. NOTE: For a d irec t c onnec tion (two fib er-connec ted CES circuit p acks), sp ecify the same VCI at b oth end s of the emulated c irc uit. When the CES is connected to an ATM switch, the VCI spec ified here must matc h the VCI used for the PVC c reated on the ATM switc h, whic h is typ ically provided by the ATM switch ad ministrator. NOTE: The Signaling Mode field is set to isdn-pri and is not ad ministrab le. 18. Set id le c od e Set the Idle Code field (typ ic ally 11111111). 19. Set interface compandingSe t t h e Interface Companding field (alaw or mulaw). Onc e ad ministered , b usyout the signaling g roup b efore c hanging . 20. Set c ountry p rotoc ol Set the Country Protocol field (Table 5-9 ). 21. Set p rotoc ol version Set the Protocol Version field (Table 5-9 ). 22. Set c irc uit typ e Set the Circuit Type field (T1 or E1). NOTE: Both end s must be the same. It is p referab le to set it to E1 even in the United States, Canad a, or other T1 countries. 23. Set c onnect Set the Connect field to pbx. Once ad ministered , busyout the signaling group before changing. 24. Set interface Set the Interface field to user at one end of the emulated c irc uit and to network at the other end. 25. Set DCP/analog bearer capabilitySe t t h e DCP/Analog Bearer Capability field to 3.1 kHz. 26. Set internetworking messag eSe t internetworking message field to PROGress. Table 5-8. ATM-CES administration — Continued ÖStep Action Description Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-15 Administering DEFINITY ECS 5 27. Verify channel setting sGo to screen 2; Screen 5-7 displays. Dep end ing on the settings in step 18: nIf Circuit Type field is set at T1, then c hannel 24 is populated. nIf Circuit Type field is set at E1, then c hannel 16 is populated. Other d etails ab out D-c hannels: nAll ports for one signaling group must be on the same ATM circuit p ack (the same c irc uit pac k that the D channel is on). nThe D-c hannel p ort is never assigned to a trunk g roup. Bec ause they are all the same, the ad ministrator d oes not need to typ e in the c irc uit p ac k loc ation for eac h channel. nNo p ort can b e assig ned to more than one sig naling group. 28. Type p ort numb ers Ad d the p ort numb ers (minimum of 6) from the p ort-to-c hannel map p ing on sig naling g roup sc reen 2. Se e ‘‘Changing the port-to-channel mapping’’ on page 5-22 if you need to chang e any ad ministration. When finished , p ress En te r to save the ad ministration. 29. Ad minister the trunk groupTy p e add trunk-group trkgrpnbr and p ress Enter. Screen 3-5 displays. Table 5-8. ATM-CES administration — Continued ÖStep Action Description Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-16 Administering DEFINITY ECS 5 30. Set final field s Set the following field s (tabb ing g oes horizontally): nGroup Type: field to isdn. NOTE: A trunk g roup c an c ontain either ISDN or ATM trunks, b ut not b oth. nThe CDR Reports field d efaults to y. nThe Carrier Medium: field to AT M. nThe TAC: field to match customer’s d ial p lan. nThe Dial Access? field d efaults to n. nThe Service Type: field to tie. Go to screen 6 and ad d the c hannel-to-p ort map p ing (Screen 5-10 ). You must have the same numb er of entries as p ort numbers in step 28. Pr es s En te r to save the c hang es. 31. Save translations Typ e save translation and p ress Enter. Table 5-8. ATM-CES administration — Continued ÖStep Action Description Continued on next page
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-17 Administering DEFINITY ECS
5
ATM-CES administration screens
NOTE:
The sc reens shown in this sec tion are as they look on a Release 8r p latform
throug h a SAT. Your interfac e and sc reen p ag e numb ers may d iffer.
Screen 5-1. Optional features—screen 1
Screen 5-2. Optional features—screen 2
change system-parameters customer-options Page 1 of 6
OPTIONAL FEATURES
G3 Version: V8 Maximum Ports: 300
Location: 1 Maximum XMOBILE Stations: 0
Maximum H.323 Trunks: 0
Maximum H.323 Stations: 0
Maximum IP SoftPhones: 0
change system-parameters customer-options Page 2 of 6
OPTIONAL FEATURES
Abbreviated Dialing Enhanced List? y CAS Branch? y
Access Security Gateway (ASG)? y CAS Main? y
Analog Trunk Incoming Call ID? y Change COR by FAC? n
A/D Grp/Sys List Dialing Start at 01? y Cvg Of Calls Redirected Off-net? y
Answer Supervision by Call Classifier? y DCS (Basic)? y
ARS? y DCS Call Coverage? y
ARS/AAR Partitioning? y DCS with Rerouting? y
ARS/AAR Shortcut Dialing? n DEFINITY Network Admin? y
Digital Loss Plan Modification? n
ASAI Proprietary Adjunct Links? y DS1 MSP? y
Async. Transfer Mode (ATM) PNC? y Emergency Access to Attendant? y
Async. Transfer Mode (ATM) Trunking? y Extended Cvg/Fwd Admin? y
ATMS? y External Device Alarm Admin? y
Attendant Vectoring? n Flexible Billing? y
Audible Message Waiting? y Forced Entry of Account Codes? y
Authorization Codes? y Global Call Classification? y
(NOTE: You must logoff & login to effect the permission changes.)
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-18 Administering DEFINITY ECS
5
Screen 5-3. Optional features—screen 3
Screen 5-4. Duplication related system parameters
Screen 5-5. ATM trunk board
change system-parameters customer-options Page 3 of 6
OPTIONAL FEATURES
Hospitality (Basic)? y PNC Duplication? y
Hospitality (G3V3 Enhancements)? y
H.323 Trunks? n Processor and System MSP? y
IP Stations? n Private Networking? y
ISDN Feature Plus? y Restrict Call Forward Off Net? y
ISDN-BRI Trunks? y Secondary Data Module? y
ISDN-PRI? y Station and Trunk MSP? y
Malicious Call Trace? y
Mode Code for Centralized Voice Mail? n Tenant Partitioning? y
Mode Code Interface? y Terminal Trans. Init. (TTI)? y
Multifrequency Signaling? y Time of Day Routing? y
Multimedia Appl. Server Interface (MASI)? y Uniform Dialing Plan? y
Multimedia Call Handling (Basic)? y Usage Allocation Enhancements? y
Multimedia Call Handling (Enhanced)? y
Multiple Locations? y Wideband Switching? y
Personal Station Access (PSA)? y Wireless? y
(NOTE: You must logoff & login to effect the permission changes.)
change system-parameters duplication Page 1 of 1 SPE B
DUPLICATION RELATED SYSTEM PARAMETERS
Enable Operation of SPE Duplication? y
Enable Operation of PNC Duplication? y
ATM TRUNK-BOARD
Location: 2E08
Name: _______________ Synchronization Capable: 1
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-19 Administering DEFINITY ECS
5
Screen 5-6. Signaling group
Table 5-9. Country and protocol version supported (for Screen 5-6)
Value Country Protocol supported
1-a United States, Canad a AT&T TR41449/41459 (tested with AT&T,
Canad ian, and MCI networks)
1-b United States Bellcore TR 1268; NIUF.302; ANSI T1.607
2 Australia AUSTEL TSO14.1; Telec om Australia TPH 1856
3 Jap an NTT INIS-NET
4 I ta l y ETS 30 0 10 2
5 Netherland s ETS 300 102
6 Singapore ETS 300 102
7 Mexic o ETS 300 102
8 Belg ium ETS 300 102
9 Saud i Arabia ETS 300 102
10-a United King d om ETS 300 102 (for c onnec tion to DASS II/DPNSS
through external c onverter)
10-b United King d om ETS 300 102 (Merc ury) British Telec om ISDN 30
11 Spain Telefonic a ISDN Spec ification
12-a France VN4 (Frenc h National PRI)
Continued on next page
add signaling-group Page 1 of 6
SIGNALING GROUP
Group Number: 2 Group Type: atm Name:
Max number of NCA TSC: 0
D-Channel: Max number of CA TSC: 0
Trunk Group for NCA TSC:
Trunk Group for Channel Selection:
Supplementary Service Protocol: a
CIRCUIT PARAMETERS
Virtual Path Identifier: 0
Virtual Channel Identifier:
Signaling Mode: isdn-pri Circuit Type: T1
Idle Code: 11111111 Connect: pbx
Interface Companding: mulaw
Country Protocol: 1
Protocol Version: a
DCP/Analog Bearer Capability: 3.1kHz
Interworking Message: PROGress
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-20 Administering DEFINITY ECS 5 Screen 5-7. Signaling group D-channel assignments—screen 2 12-b France ETS 300 102 mod ified ac cord ing to P10-20, called Euronumeris Argentina ETS 300 102 Brazil ETS 300 102 China ETS 300 102 Germany ETS 300 102 Hong Kong ETS 300 102 South Korea ETS 300 102 New Zealand ETS 300 102 Table 5-9. Country and protocol version supported (for Screen 5-6) Value Country Protocol supported Continued on next page add signaling-group next Page 2 of 6 SIGNALING GROUP Chan Port Chan Port __1: ___ _17: ___ __2: ___ _18: ___ __3: ___ _19: ___ __4: ___ _20: ___ __5: ___ _21: ___ __6: ___ _22: ___ __7: ___ _23: ___ __8: ___ _24: 0cc (T1 only) __9: ___ _10: ___ _11: ___ _12: ___ _13: ___ _14: ___ _15: ___ _16: Occ (E1 only)
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Administering ATM-PNC and ATM-CES
5-21 Administering DEFINITY ECS
5
Screen 5-8. Trunk group—screen 1
Screen 5-9. Trunk group—screen 4
add trunk-group Page 1 of 10
TRUNK GROUP
Group Number: 1 Group Type: isdn CDR Reports: y
Group Name: OUTSIDE CALL COR: 1 TN: 1 TAC:
Direction: two-way Outgoing Display? n Carrier Medium: ATM
Dial Access? n Busy Threshold: 99 Night Service:
Queue Length: 0
Service Type: tie Auth Code? n TestCall ITC: rest
Far End Test Line No:
TestCall BCC: 4
TRUNK PARAMETERS
Codeset to Send Display: 6 Codeset to Send National IEs: 6
Max Message Size to Send: 260 Charge Advice: none
Supplementary Service Protocol: a Digit Handling (in/out): enbloc/enbloc
Trunk Hunt: cyclical QSIG Value-Added Lucent? n
Digital Loss Group: 13
Calling Number - Delete: Insert: Numbering Format:
Bit Rate: 1200 Synchronization: async Duplex: full
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 0
add trunk-group Page 4 of 10
TRUNK GROUP
Administered Members (min/max): 0/0
GROUP MEMBER ASSIGNMENTS Total Administered Members: 0
Port Code Sfx Name Night Sig Grp
1:
2:
3:
4:
5:
6:
7:
8:
9:
10:
11:
12:
13:
14:
15:
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-22 Administering DEFINITY ECS 5 Changing the port-to-channel mapping Use the following step s to c hang e the p ort-to-c hannel map p ing for emulated circuits: 1. Type busyout atm signaling-group siggrpnbr and press En t e r to busyout the sig naling g roup . 2. Type change trunk-group trkgrpnbr and press En t e r. Remove any p ort ad ministration on sc reen 6. 3. Type change signaling-group siggrpnbr. Mod ify the p ort-to-c hannel map p ing . 4. Type change trunk-group trkgrpnbr and press En t e r. Ad d the p orts bac k in on sc reen 6, using new p ort numb ers, if d esired. 5. Type release atm signaling-group siggrpnbr and p ress En t e r to release the sig naling g roup . The d isp lay shows the c ommand ab orts, b ut the D-c hannel and B-c hannels c ome up . DEFINITY commands for CES Ad ministration c ommand s that are useful in working with CES are listed in Table 5-10. Table 5-10. ATM administration commands Command Description display circuit-packs cabinet Displays the p acks in the c ab inet, id entifying ATM Trunk as well as ATM PNC EI b oard s. ATM Interfac e b oard s have not b een sp ecified as CES or PNC yet. display atm ports eqloc Displays the 256 p orts on the ATM b oard with the corresponding signaling and trunk group. list configuration atmLists the ATM b oard s, identifying eq uip ment loc ation, b oard c od e, typ e, and vintag e. list configuration trunksLists boards identifying assigned ports. Although the ATM b oard is listed , the 256 p orts are not.