Lucent Technologies Definity Release 8.2 Atm Installation Manual

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-23 Administering DEFINITY ECS 
5
Additional DEFINITY ECS administration
After ad ministering  the ATM-PNC or ATM-CES, you may need  to d o some further 
ad ministration, sp ec ific ally:
nLocations
nSVC cache (PNC only)
nGain/Loss adjustments (PNC only)
Locations 
The DEFINITY ATM-PNC makes it easier for the DEFINITY ECS to have p ort 
networks in multip le time zones. To hand le d istanc es b etween the PPN and its 
EPNs, the system trac ks one or more loc ations b y assig ning  eac h c ab inet a 
loc ation number. All loc ations must b e in the same c ountry c od e.
If upg rad ing  from a p re-Release 7, you may need to set the loc ations for your 
EPNs. To ad minister loc ations, follow the p roc ed ure in Table 5-11
.
NOTE:
The sc reens and  field  d esc rip tion follow the tab le.
Table 5-11. Administer location procedure 
ÖStep Action Description
1. Ac tivate the feature Typ e change system-parameters customer-options and  
press 
En te r. (Init password req uired .)
The Customer Options screen displays.
Go to screen 3 (Screen 5-10
).
2. Set multiple locations Chang e the value in the Multiple locations field to y 
and press 
En t e r.
NOTE:
The system is limited to a sing le location unless this 
field is c hanged .
3. Verify feature 
ac tivationTy p e  display system-parameters customer-options and  
press Enter.
The Customer Options screen d isplays (Screen 5-10
).
Go to sc reen 2 and  verify that the Multiple locations 
field  is set to y.
4. Chang e cab inet 
ad ministrationTy p e  change cabinet n (cab inet numb er) and  p ress 
En t e r.
The Cabinet sc reen d isp lays (Screen 5-11
). 
Continued on next page 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-24 Administering DEFINITY ECS 
5
5. Ad minister c ab inet 
locationEach cab inet in the switc h and the p ort network(s) in that 
c ab inet must b e assig ned  a location numb er (d efault 
loc ation numb er is 1).
Chang e the Location field  to the ap propriate number 
and press 
En t e r.
6. Ad minister loc ation 
p rop ertiesTy p e  change locations and  p ress 
En t e r. 
The Loc ations sc reen d isp lays (Screen 5-12
).
7. Set timezone offset Ensure that the 
Timezone Offset field for 
Loc ation 1 is set at 00:00, ind ic ating  the local time. This 
serves as a system-wid e, relative time reference.
8. Set Number Plan Area 
CodeThe  Number Plan Area Code field  (for sub net trunking  
c onversions b etween 10-d ig it North Americ an Numb er 
Plan (NANP) and 7-dig it (loc al) numbers.
Leaving  the field  blank is the normal setting  for a loc ation
noutsid e the NANP.
nwith no 7-d ig it loc al c alling  p lan. These locations may 
have overlayed area codes requiring10-digit dialing.
9. Ad minister c ab inet 
locationsAd minister all other loc ations as necessary.
For examp le, if the PPN is in New York and  a g roup  of 
EPNs is in Los Ang eles, then New York (loc ation 1) is the 
reference and  is ad ministered  with no time offset (see step 
8). Los Angeles (location 2) is 3 hours earlier than New 
York time and  is administered  with a time offset of -03:00.
Ad minister cab inet locations as they are add ed  to the 
system. More than 1 c ab inet can b e in the same loc ation.
For loc ation-related  feature limitations and  interac tions see 
Table 5-11
.
When finished , p ress 
En te r to effec t the c hang es.
Table 5-11.Administer location procedure  — Continued
ÖStep Action Description
Continued on next page 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-25 Administering DEFINITY ECS 
5
10. Ad minister 
Daylig ht-Saving s 
Ti me  r ul esTy p e  change daylight-savings-rules and press Enter.
The Daylight Saving s Rules sc reen displays (Screen 5-13
).
Ad minister as many rules as nec essary for all of the 
ad ministered  locations.
If you want to d eny ac c ess for an individ ual log in:
nset the Additional Restrictions field for that 
log in to y, and  entering  daylight-savings-rules in the 
Restricted Object List field .
nset the Administer Features field  for that login to 
n.
nset the Display Admin. and Maint. Data field  
for that log in to n.
11. Verify date and  time Check the system d ate and  time (set time).
Ensure that the Type and  Daylight Savings Rule 
field s are ad ministered  c orrec tly (Screen 5-14
).
12. Ad minister ARS 
routingAd minister the Location field  on the ARS analysis sc reen 
(change ars analysis 0 location all), ob serving  the 
following  c ond itions:
nARS c ustomer op tion (change system-parameters 
customer-options) must b e enab led  (init p assword  
req uired ).
nthe Multip le Loc ations c ustomer op tion must b e 
ad ministered  to a value other than all.
Table 5-11.Administer location procedure  — Continued
ÖStep Action Description
Continued on next page 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-26 Administering DEFINITY ECS 
5
Screen 5-10.Optional features—screen 3
Screen 5-11. Cabinet
NOTE:
With Release 7.1 or later software, all c ab inets are automatic ally assig ned  
loc ation 1.
change system-parameters customer-options                       Page   3 of   6 
                                OPTIONAL FEATURES                              
                     Hospitality (Basic)? y                PNC Duplication? y
         Hospitality (G3V3 Enhancements)? y
                            H.323 Trunks? n       Processor and System MSP? y
                             IP Stations? n             Private Networking? y
                       ISDN Feature Plus? y  Restrict Call Forward Off Net? y
                         ISDN-BRI Trunks? y          Secondary Data Module? y
                                ISDN-PRI? y          Station and Trunk MSP? y
                    Malicious Call Trace? y
    Mode Code for Centralized Voice Mail? n            Tenant Partitioning? y
                     Mode Code Interface? y    Terminal Trans. Init. (TTI)? y
                Multifrequency Signaling? y            Time of Day Routing? y
Multimedia Appl. Server Interface (MASI)? y           Uniform Dialing Plan? y
        Multimedia Call Handling (Basic)? y  Usage Allocation Enhancements? y
     Multimedia Call Handling (Enhanced)? y
                      Multiple Locations? y             Wideband Switching? y
           Personal Station Access (PSA)? y                       Wireless? y
        (NOTE: You must logoff & login to effect the permission changes.)
change cabinet 1                                                     Page 1 of 1
                               CABINET
 CABINET DESCRIPTION
                  Cabinet: 1
           Cabinet Layout: five-carrier
             Cabinet Type: processor
   Number of Portnetworks: 1
                 Location: 1
                     Room:             Floor:          Building:
 CARRIER DESCRIPTION
   Carrier       Carrier Type        Number
      C        not-used              PN 01
      B        not-used              PN 01
      A        processor             PN 01
      X        fan
      D        not-used              PN 01
      E        not-used              PN 01 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-27 Administering DEFINITY ECS 
5
Field description:
Screen 5-12. Locations—screen 1
NOTE:
Up g rad es from a p revious software version d efault to a sing le loc ation 
(loc ation 1) with the values shown in Screen 5-12
. The Number Plan 
Area Code
 is the home NPA from the d ial p lan sc reen of the earlier 
release.
Field description:
LocationLoc ation numb er assoc iated with the c ab inet (rang e is 1-44, default 1).
nField  c annot b e b lank
nLoc ation is d isplay-only if the Multiple locations field  (change 
system-parameters customer-options) is not set to y.
ARS Prefix 1 
Required For 
10-Digit NANP 
Calls?This field  is set to y if all 10-d igit NANP c alls (those marked  as FNPA in the 
ARS analysis tables) must b e p rec eded  b y a d ig it ‘1’ (commonly c alled  the 
toll prefix); otherwise, it is set to n.  
NOTE:
Many areas in the United  States have c hang ed  to 10-d ig it d ialing  for 
loc al calls, and ad ministration for this field and the ARS analysis 
entries must reflect these c hanges.
NumberThis read-only field  uniquely id entifies a location.  Valid  values rang e from 
1 to 44.
change locations                                                   Page 1 of 3
                               LOCATIONS
                 ARS Prefix 1 Required For 10-Digit NAMP Calls? y
 Number   Name              Timezeone  Daylight-Savings        Number Plan
                             Offset    Rule                    Area Code
   1      Main              + 00:00    0
   2                            :
   3                            :
   4                            :
   5                            :
   6                            :
   7                            :
   8                            :
   9                            :
  10                            :
  11                            :
  12                            :
  13                            :
  14                            : 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-28 Administering DEFINITY ECS 
5
Screen 5-13. Daylight savings rules screen
Field description:
NameThis15-charac ter field  id entifies the location but may b e blank for any given 
loc ation (d efault =  y).
Timezone 
OffsetThis field  sp ec ifies the time offset from the system stand ard  time. Set a 
value in the ± , hour (0-23),and minute (0-59) areas, as these field s c annot 
b e b lank for an ad ministered  loc ation.
NumberThis field  is the numb er assig ned to the ad ministered , c ustomized  rule 
(0 to 15) for this loc ation.  Eac h rule c onsists of the week, d ay, month, and  
time that d aylig ht saving s starts and  stop s. 
nRule 0 is no d aylig ht saving s time and is not alterab le.
nRule 1 d efaults to the U.S. daylig ht savings time rule but may b e 
altered or deleted.
Number Plan 
Area CodeThis field  is the numb ering p lan area cod e app rop riate for this loc ation 
(can be blank).
Change DayThe d ay of the week, or date that the c hange takes effect.
MonthThe month the chang e takes effec t.
DateThe d ate on or after whic h the c hange takes p lace.
Time2 field s that spec ify the hour (0-23) and  minute (0-59) that the c hang e 
takes effec t (in 24-hour format)
change daylight-savings-rules                                      Page 1 of 2
                        DAYLIGHT SAVINGS RULES
 Rule          Change Day                 Month  Date   Time    Increment
  0: No Daylight Savings
  1: Start: first Sunday     on or after April     1   at 2 :0    1 :0
      Stop: first Sunday     on or after October   25  at 2 :0
  2. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 :
  3. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 :
  4. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 :
  5. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 :
  6. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 :
  7. Start: first            on or after               at 0 :     0 :
      Stop: first            on or after               at 0 : 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-29 Administering DEFINITY ECS 
5
NOTE:
Some states (Arizona) or p ortions of states (Ind iana) d o not ob serve 
d aylig ht saving s time. Verify the d aylig ht saving s time status in all your 
locations.
Screen 5-14. Date and time screen
NOTE:
When the system c loc k is up g rad ed  from an earlier release, the d aylig ht 
savings time rule on the set time
 sc reen defaults to 0
 (no rule).  While you 
c an c hang e the d aylig ht saving s time rule, the system c loc k is not ad justed  
automatic ally until the next transition of the rule.
Field description:
Increment2 field s sp ec ifying  the numb er of hours (0-23) and  minutes (0-59) the c loc k 
is moved  ahead  to b eg in d aylig ht saving s time (and  moved  b ac k to return 
to stand ard  time).
Type Daylight-savings =  d aylig ht saving s time
Standard =  stand ard time
Daylight 
Savings RuleThe d aylig ht saving s time rule number (0 to 15). Rule 0 is no d aylight 
saving s time, and  rule 1 d efaults to U.S. d aylig ht saving s time rule.
set time                                                          Page 1 of 1
                               DATE AND TIME
          DATE
            Day of the Week: Sunday          Month: October
           Day of the Month: 24 Year: 1999
          TIME
            Hour: 8  Minute: 16     Second: 31     Type: Standard
                      Daylight Savings Time Rule: 0
  WARNING: Changing the date or time will impact BCMS, CDR and MEASUREMENTS 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-30 Administering DEFINITY ECS 
5
SVC cache 
DEFINITY ATM software maintains a c ac he of inter-p ort-network c onnec tions 
(SVCs), with the p referenc e g iven to those SVCs with the long est setup  times.  All 
c ac hed  interc onnec tions are ag ed  to ensure that a larg e numb er of them are not 
kept during nearly idle periods.
You c an ad minister the setup  time threshold s, c ac he hold ing  times, and  total 
c ac he size, whic h c an mitig ate the effec ts of long  interc onnec tion setup d elays.
Th e  change atm svc-cache
 command (Screen 5-15
) is restric ted  to init, inad s, 
and  c raft log ins.
Screen 5-15. ATM SVC cache report
change atm svc-cache                                                          Page 1 of 1
                           ATM SVC CACHE
            Algorithm:                        Size: 410
                           ALGORITHM PARAMETERS
                         For Latency   Hold Time
                         >= 50    ms   36    sec
                         >= 0     ms   12    sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec
                         >=       ms         sec 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-31 Administering DEFINITY ECS 
5
Field description:
Gain/Loss adjustments 
Gain and  loss are ad ministrab le. Calls b etween a d ig ital (BRI or DCP) p hone 
(6400 and 8400 series) and an analog  trunk port req uire adjustments to the 
d efault gain/loss setting s to p revent d istortion. Use the p roc ed ure (Table 5-12
) to 
ad minister d ig ital phones on ATM-PNC DEFINITY ECSs.
NOTE:
Use the following  p roc ed ure only for Series 6400 or 8400 d ig ital p hones.
AlgorithmThe name of the c ache algorithm (d efault is lan).  Possib le values are 
none, lan, man, wan, and  custom.
When this field is c hanged  to none, lan, man, or wan, the read -only For 
Latency and  Hold Time field  values c hang e to the following  (all other 
entries are b lank):
Value For Latency (ms) Hold Time (ms)
none00
lan50 36
012
man800 80
50 16
08
wan800 200
200 36
50 16
00
When this field  is custom, none of the For Latency or Hold Time field  
values c hang e, b ut the fields chang e from read -only to read /write.  For 
examp le, if you want a slig ht variation of the wan alg orithm, typ e wan first 
to set the above values, then typ e custom to chang e the individ ual 
parameters.
SizeThe maximum numb er of entries simultaneously allowed  in the c ac he 
(d efault =  410).
For LatencyThese fields (10) are read -only if the Algorithm field  is none, lan, man, 
or wan, b ut are read /write if Algorithm is custom. Defaults: 36 for the 
1st entry, 0 for the second, b lank for the last 8 entries. 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Administering ATM-PNC and ATM-CES 
5-32 Administering DEFINITY ECS 
5
Table 5-12. Gain/loss adjustment procedure 
ÖStep Action Description
1. Set or verify gain/loss 
ad ministrationTyp e  change system-parameters country-options and  
press 
En te r.
The System Parameters Country-Op tions screen d isp lays 
(Table 5-16
). 
2. Set d ig ital loss p lan Domestic: Ensure that the Digital Loss Plan field  is 1. 
If it is, exit this p roced ure.
International: If the Digital Loss Plan field  is anything  
other than 1, you must c hang e the terminal p arameters. 
Proc eed  to step  3.
3. Customize the d ig ital 
p hone series 
ad ministrationTyp e  change terminal-parameters 
termtype and press 
En te r .  (
termtype can b e 603/302B1, 6400 or 8400.)
See the 6400-Type Terminal Parameters example (Table 
5-17) d isplay (6400 used  for this examp le).
Chang e the Default Parameter Set field to 1.
4. Chang e the settings In the Primary Levels p art of the sc reen, c hange the 
following  field s to these settings:
nVoice Transmit (dB) = +2.5
nVoice Receive (dB) = -2.0
For 6400 and  8400 series p hones only: in the BUILT-IN 
SPEAKER LEVELS p art of the sc reen, c hange the following  
field s to these setting s:
nVoice Transmit (dB) = 0.0
nVoice receive (dB) = 0.0
Pr es s 
En te r.
5. If b oth series 6400 
and 8400 dig ital 
p hones are usedRep eat step s 3 and  4 for all of the app lic ab le phone series 
c onnec ted  to this switch, using  603/302B1, 
6400 or 8400 
at the end of the c ommand  string. When finished , p ress 
En te r to effect the c hang es.
Continued on next page