Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies Definity Release 8.2 Atm Installation Manual
Lucent Technologies Definity Release 8.2 Atm Installation Manual
Have a look at the manual Lucent Technologies Definity Release 8.2 Atm Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Upgrading to ATM-PNC 4-17 R7r ATM-PNC to R8r ATM-PNC 4 19. Chec k health status p nc Is State of Health field for b oth A- and B-PNCs func tional? Any alarms? Does standby refreshed? f i e l d s a y yes? Screen 4-2 20. PNC interc hang e reset pnc -interc hang ePerform PNC interc hang e to make the B-PNC ac tive 21. Chec k interc hang e status p nc Ensure that B-PNC is active and A-PNC is standby. 22. Busyout standb y PN Cbusyout pnc-standbyMake the A-sid e the standb y b efore removing any p hysic al c onnec tions. 23. Rep eat step s 8 throug h 19Rep eat step s 8 throug h 19 (c hec k health) b ut use a-p nc rather than b-pnc. 24. Proc eed to step 6 in Table 4-6 . Table 4-5. Upgrading ATM-PNC from Release 6.3r to Release 8r — Critical reliability/ATM network duplication — Continued÷ Step Action Command Description TimeRecord dataMore infoSite-specific comments Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Upgrading to ATM-PNC 4-18 R7r ATM-PNC to R8r ATM-PNC 4 Table 4-6. Upgrading ATM-PNC from Release 6.3r to Release 8r — Standard and High Reliability÷ Step Action Command Description TimeRecord dataMore info Site-specific comments 1. Upg rad e DEFINITY EC S t o R7 rRefer to DEFINITY Enterp rise Communic ations Server Release 7 Up g rades and Ad d itions for R7r ! CAUTION:You must up g rad e to R7r first. 2. Log on to DEFINITY switc hLog on to the DEFINITY ECS switc h 3. Sup p ress alarms c hang e system-p arameters maintenanc eEnsure that the Alarm Origination to OSS Numbers field is neither Screen 4-1 4. Save translations save translations tap eSave c urrent translations to removab le media and remove when finished (lab el).varies 5. Load another tap e Lab el and load dup lic ate fall-b ac k removable media 6. Make d uplic ate removable med iasave translations tap eSave translations to fall-bac k removab le mediavaries 7. Chec k health status p nc Determine if alarms (b ad c omp onents, fib ers) might impac t upg rad e Screen 4-2 8. List all atm c onnec tionslist atm p nc a-pnc Disp lays numb ered list of all ad ministered ATM A-PNC c onnec tions 9. Busyout c onnec tion busyout atm pnc n (c onnec tion numb er)Busyout all c onnec tions listed in step 8, b eginning with A-PNC EPNs. Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Upgrading to ATM-PNC 4-19 R7r ATM-PNC to R8r ATM-PNC 4 10. Remove old ATM circuit packsRemove old, A-PNC TN2238 c irc uit p ac ks. NOTE:Carefully remove the fiber c onnec tions to the ATM c irc uit packs. 11. Insert ATM c irc uit packsInsert A-PNC TN2305/TN2306 c irc uit p ac ks. 12. Connec t fib er to A-PNC ATM c irc uit packsPhysic ally c onnec t (reterminate) fib er to all A-PNC ATM c irc uit pac ks 13. Ad minister A-PNC ATM circuit packsc hang e circuit-packs n (c ab inet numb er)Ad minister A-PNC ATM c irc uit p ac k Y 14. Ad minister ILMI/ESI informationc hang e atm pnc n (c onnec tion numb er)Chang e the new ESI (b oard ) ad dress in the ESI field for eac h B-PNC ATM circuit pack. Query the ATM switc h. Read the ad dress information from the ATM terminal sc reen and d uplic ate in the DEFINITY ECS switc h administration.Y Screen 4-4 15. Verify c irc uit pac k insertionlist c onfig uration atmEnsure that all new A-PNC ATM c irc uit p ac ks are listed in the rep ort. 16. Release atm c onnec tionrelease atm p nc n Release all of the atm c onnec tions that were b usied out in step 10. Table 4-6. Upgrading ATM-PNC from Release 6.3r to Release 8r — Standard and High Reliability — Continued÷ Step Action Command Description TimeRecord dataMore info Site-specific comments Continued on next page
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Upgrading to ATM-PNC 4-20 R7r ATM-PNC to R8r ATM-PNC 4 17. Chec k link administrationlist sys-link Ensure that PACLs (all PNs) and EALs (all EPNs) are up Screen 4-8 18. Chec k health status p nc Is State of Health field for A-PNCs func tional? Any alarms? Does standby refreshed? f i e l d s a y yes? Screen 4-2 19. Upg rad e DEFINITY EC S t o R8 rRefer to DEFINITY Enterp rise Communic ations Server Release 8 Up g rades and Ad d itions for R8r Table 4-6. Upgrading ATM-PNC from Release 6.3r to Release 8r — Standard and High Reliability — Continued÷ Step Action Command Description TimeRecord dataMore info Site-specific comments Continued on next page
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Upgrading to ATM-PNC
4-21 Screens and Tables
4
Screens and Tables
Screen 4-1. Maintenance-related system parameters
Screen 4-2. Port network connectivity
change system-parameters maintenance Page 1 of 2 SPE B
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
Product Identification: 1501137003
First OSS Telephone Number: Abbrev Alarm Report? y
Second OSS Telephone Number: Abbrev Alarm Report? n
Alarm Origination to OSS Numbers: neither
Cleared Alarm Notification? n Suspension Threshold: 5
Restart Notification? n
Test Remote Access Port? n
CPE Alarm Activation Level: none
Customer Access to INADS Port? n
Repeat Dial Interval (mins): 7
SCHEDULED MAINTENANCE
Start Time: 01 : 00 Stop Time: 01 : 01
Daily Maintenance: daily Save Translation: no
Control Channel Interchange: daily System Clocks Interchange: daily
SPE Interchange: daily
change system-parameters maintenance Page 1 of 2 SPE B
MAINTENANCE-RELATED SYSTEM PARAMETERS
OPERATIONS SUPPORT PARAMETERS
Product Identification: 1501137003
First OSS Telephone Number: Abbrev Alarm Report? y
Second OSS Telephone Number: Abbrev Alarm Report? n
Alarm Origination to OSS Numbers: neither
Cleared Alarm Notification? n Suspension Threshold: 5
Restart Notification? n
Test Remote Access Port? n
CPE Alarm Activation Level: none
Customer Access to INADS Port? n
Repeat Dial Interval (mins): 7
SCHEDULED MAINTENANCE
Start Time: 01 : 00 Stop Time: 01 : 01
Daily Maintenance: daily Save Translation: no
Control Channel Interchange: daily System Clocks Interchange: daily
SPE Interchange: daily status pnc
PORT NETWORK CONNECTIVITY
Duplicated? no
Software Locked?
Standby Busied?
Standby Refreshed?
Interchange Disabled?
A-PNC B-PNC
Mode: active Mode:
State of Health: State of Health:
Inter PN Index: Inter PN Index:
Major Alarms: 0 Major Alarms:
Minor Alarms: 0 Minor Alarms:
Warning Alarms: 0 Warning Alarms:
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Upgrading to ATM-PNC
4-22 Screens and Tables
4
Screen 4-3. Cabinet
Screen 4-4. ATM PNC
Table 4-7. PNC interchange
A-PNC status B-PNC status Description
Ac tive Stand b y Go to the next step
Stand b y Ac tive 1. Do a PNC interc hang e (reset
pnc-interchange
)
2. Verify the interc hang e (status pnc
):
nA-PNC is ac tive
nB-PNC is stand b y
change cabinet 1 Page 1 of 1 SPE B
CABINET
CABINET DESCRIPTION
Cabinet: 1
Cabinet Layout: five-carrier
Cabinet Type: processor
Number of Portnetworks: 1
Room:
Floor:
Building:
CARRIER DESCRIPTION
Carrier Carrier Type Number Duplicate
C port PN 01
B processor PN 01
A processor PN 01
X Fan
D dup-sw-node SN 01 01E
E switch-node SN 01 01D
change atm pnc 1
ATM PNC
Connection Number: 1
A-PNC B-PNC
Location: 01B02 Location: 01B02
Name: Name:
Address Format: ICD ATM Address Format: ICD ATM
AFI: 47 AFI: 47
ICD: 0005 ICD: 0005
HO-DSP: 80FFE1000000F2071B02 HO-DSP: 80FFE1000000F2071B02
ESI: 000000000000 ESI: 000000000000
SEL: 00 SEL: 00
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Upgrading to ATM-PNC
4-23 Screens and Tables
4
Screen 4-5. Synchronization plan
Screen 4-6.Optional features—screen 2
change synchronization Page 1 of 6 SPE A
SYNCHRONIZATION PLAN
SYNCHRONIZATION SOURCE (circuit pack location)
Stratum: 4
Primary: ATM-SW Secondary: ATM-SW
Location Name Slip Location Name Slip
02A17 g3rs-1e20 n 03B20 r2v6-0318 n
03D20 r2v6-tg86-isdn n 03E20 ds1-r2v5-20305 n
01C20 isdn-r2v5-1e13 y 02C20 r2v5-1e10 xxx n
02D20 ISDN- G3i n 04A17 ds-1 to s75 v2 n
04B16 N3-isdn-2c19 n 01C19 nod2-g3s-1b15 y
03B17 g3s-isdn-1c16 n 02B20 Spare n
03D19 wdbnd #1 L2 n 01C17 spare n
NOTE: DS1 and BRI TRUNK sources result in stratum 4, type II synchronization
change system-parameters customer-options Page 2 of 6
OPTIONAL FEATURES
Abbreviated Dialing Enhanced List? y CAS Branch? y
Access Security Gateway (ASG)? y CAS Main? y
Analog Trunk Incoming Call ID? y Change COR by FAC? n
A/D Grp/Sys List Dialing Start at 01? y Cvg Of Calls Redirected Off-net? y
Answer Supervision by Call Classifier? y DCS (Basic)? y
ARS? y DCS Call Coverage? y
ARS/AAR Partitioning? y DCS with Rerouting? y
ARS/AAR Shortcut Dialing? n DEFINITY Network Admin? y
Digital Loss Plan Modification? n
ASAI Proprietary Adjunct Links? y DS1 MSP? y
Async. Transfer Mode (ATM) PNC? y Emergency Access to Attendant? y
Async. Transfer Mode (ATM) Trunking? y Extended Cvg/Fwd Admin? y
ATMS? y External Device Alarm Admin? y
Attendant Vectoring? n Flexible Billing? y
Audible Message Waiting? y Forced Entry of Account Codes? y
Authorization Codes? y Global Call Classification? y
(NOTE: You must logoff & login to effect the permission changes.)
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration 555-233-124 Issue 1
April 2000
Upgrading to ATM-PNC
4-24 Screens and Tables
4
Screen 4-7. Optional features—screen 3
Screen 4-8. System links information
change system-parameters customer-options Page 3 of 6
OPTIONAL FEATURES
Hospitality (Basic)? y PNC Duplication? y
Hospitality (G3V3 Enhancements)? y
H.323 Trunks? n Processor and System MSP? y
IP Stations? n Private Networking? y
ISDN Feature Plus? y Restrict Call Forward Off Net? y
ISDN-BRI Trunks? y Secondary Data Module? y
ISDN-PRI? y Station and Trunk MSP? y
Malicious Call Trace? y
Mode Code for Centralized Voice Mail? n Tenant Partitioning? y
Mode Code Interface? y Terminal Trans. Init. (TTI)? y
Multifrequency Signaling? y Time of Day Routing? y
Multimedia Appl. Server Interface (MASI)? y Uniform Dialing Plan? y
Multimedia Call Handling (Basic)? y Usage Allocation Enhancements? y
Multimedia Call Handling (Enhanced)? y
Multiple Locations? y Wideband Switching? y
Personal Station Access (PSA)? y Wireless? y
(NOTE: You must logoff & login to effect the permission changes.)
list sys-link Page 1
SYSTEM LINKS INFORMATION
Location Link Type/ State Current Faulted Last Fault
Channel Path Path Recorded
02A0101 EAL up present none
02B0201 EAL up present none
01B0202 PACL up present none
01C0302 PACL up present none
02A0102 PACL up present none
02B0202 PACL up present none
Administering ATM-PNC and ATM-CES 5-1 Accessing Switches for Administration 5 DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 5 Administering ATM-PNC and AT M - C E S After the hard ware is up g rad ed to Release 8 ATM-PNC or ATM-CES, you must ad minister the ATM switc h and and the DEFINITY ECS to c omplete the p roc ess. Ad ministration p roc ed ures are as follows: nAccessing Switches for Administration nAcquiring ATM Addresses nAdministering ATM Switch nAdministering DEFINITY ECS Accessing Switches for Administration To ac c ess the DEFINITY ECS and ATM switc hes for ad ministration, you must have one of the following setup s: nSAT—System Ad ministration Terminal nDSA—DEFINITY Site Ad ministration nDNA—DEFINITY Network Ad ministration The SAT has been the trad itional method for ac c essing DEFINITY; however, it is no long er b eing offered or sup p orted . Field tec hnic ians c an use lap top s or Wind ows-b ased PCs to ad minister the switc h. DSA is a software-only system manag ement tool that runs on p ersonal c omp uter using Mic rosoft Windows 95/98/NT 4.0. It is d esig ned for a sing le user to ad minister and monitor DEFINITY switc hes and voic e mail systems. The software is availab le on lap top s.
DEFINITY ECS Release 8.2 ATM Installation, Upgrades, and Administration 555-233-124 Issue 1 April 2000 Administering ATM-PNC and ATM-CES 5-2 Acquiring ATM Addresses 5 DEFINITY Network Ad ministration (DNA) is a software-only system manag ement tool b ased on c lient-server arc hitec ture. It g ives multiple ad ministrators the ab ility to ad minister a network of DEFINITY switc hes and INTUITY Voic e Mail systems simultaneously from d ifferent mac hines. Althoug h the 3 method s of ac c ess p resent d ifferent interfac es, the c ommand syntax is the same. The sc reens shown in this sec tion are as they look on a Release 8r platform throug h a SAT. Your interfac e and sc reen p ag e numb ers may differ. Acquiring ATM Addresses Eq uip ment that interfac es with an ATM switc h must have a uniq ue 40-d ig it (20-byte) ATM address (see Figure 3-1). These 40 characters are divided into sec tors as Table 5-1 shows: In Release 7 or later, the ad d ress of the EPN is automatic ally d erived b y the loc al ATM switc h using the ad d ress reg istration p roc ed ure d efined in the Integ rated Loc al Manag ement Interfac e (ILMI ). The ATM switc h uses its 13-b yte network ad d ress p lus the 6-b yte ESI, or MAC ad d ress, and the 1-b yte selec tor b yte of the c orresp ond ing TN2305 or TN2306 b oard (s) in the EPN to formulate the 20-b yte ATM ad d ress(es). ATM switc hes c an use any of the ad d ress formats listed in Table 5-2 . NOTE: The b eg inning AFI and the last 2 sec tors (ESI, and Selec tor) in Table 5-2 are all the same leng th, making it easier to p arse the ATM ad dress, reg ard less of the format. Table 5-1. ATM addressing Hex digit positionLength (hexadecimal) Description 1-26 26 Network p refix that id entifies a p artic ular ATM switc h in the network. 27-38 12 End system id entifier (ESI) id entifies eac h end -station c onnec ted throug h an ATM switch. 1 1. Th e ESI is us ua l ly t h e I EEE M ed i a A c c e s s C o nt r o l ( MA C ) a d d r e ss p r o g r am me d i n to the end -station d evice d uring its manufac ture. The MAC ad d ress on the TN2305/TN2306 is loc ated on the MAC ad d ress b utton on the c ircuit p ack (see Fig ure 5-1). 39-40 2 Selec tor b yte is always 0 for DEFINITY ATM