Lucent Technologies Definity Release 8.2 Atm Installation Manual

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-47 Troubleshooting ATM-PNC 
6
Field descriptions:
2. The ATM PNC Delayed /Failed  Setup s rep ort (ac c essed  throug h the list 
measurements atm setup-events
) shows:
nevent d ate
nevent time
nevent type (delayed or failed)
nd elay time (in ms)
nfrom/to PN c onnec tion numb ers
nPNC c onnec tion (A-PNC or B-PNC)
Syn t a x :  list measurements atm setup-events
 [
x] or [from-conn x] [to-conn x] 
[
print or schedule]
Setup Count:The numb er of SVCs setup  d uring  the time p eriod  
ind ic ated . Values: 0 - 9999999
AddParty Count:The numb er of ADDPARTY req uests proc essed. 
Values: 0 - 9999999
Total Count:The total numb er of SETUP and  ADDPARTY req uests. 
Values: 0 - 9999999
Average Latency:Averag e latency in milliseconds for SVC type d escrib ed  
d uring  the time p eriod ind icated. Values:  0 - 8000
Failure Count:The numb er of SVCs of the type d escrib ed  that could  not 
be established by the ATM network during the time period. 
This does not inc lud e d elayed  SVCs; that is, the d elay 
exceed ed  the threshold set for Timeout (msec): on the 
ATM-Related  System Parameters form. Values: 0 - 9999.  
The numb er “ 9999”  displays if the value is g reater than 
9999.
(msec) Count:The numb er of d elayed  SVCs that fell within the time rang e 
(millisec ond s) d uring  the time p eriod  ind icated . 
Values: 0 - 9999999
(sec) Count:The numb er of d elayed  SVCs that fell within the time rang e 
(second s) d uring  the time p eriod  ind icated . Values: 0 - 
9999999 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-48 Troubleshooting ATM-PNC 
6
The c ommand  syntax allows you to list setup  events for a p artic ular c onnec tion 
numb er or for a rang e of c onnec tion numb ers (Table 6-12
).
The rep ort from the list measurement atm setup-events
 c ommand  looks like 
Screen 6-19
Screen 6-19. ATM-PNC delayed/failed setups report
Table 6-12. Constricted bandwidth administration procedure
Command Description
list measurements atm setup-eventsLists up to 100 of the most rec ent setup  
events
list measurements atm setup-events
 from-conn 3Lists all setup  events from c onnec tion 3 to all 
other connec tions
list measurements atm setup-events
from-conn 3 to-conn 4Lists all setup  events from c onnec tion 3 to 
c onnec tion 4
list measurements atm setup-events
to-conn 4Lists all setup  events from all connec tions to 
c onnec tion 4
list measurements atm setup-events 4Lists all setup  events from or to connection 4
Continued on next page
list measurements atm setup-events
                                                        Page 1
Switch Name:        Date: 2:33 pm  TUE DEC 12, 1999
                     ATM PNC DELAYED/FAILED SETUPS
Date       Time      Event    Delay(msec)    From Conn To Conn  PNC 
12/12/1999 14:32:10  delayed  1765               3        7     A-PNC
12/12/1999 14:31:37  failed                      3        7     A-PNC
12/12/1999 14:31:22  delayed  1809               7        8     A-PNC
12/12/1999 14:31:18  delayed  1672              12        6     B-PNC
12/12/1999 14:31:15  delayed  1023               3        7     B-PNC
12/12/1999 14:29:45  delayed  1005               1        3     B-PNC
12/12/1999 14:29:23  failed                      3        1     A-PNC
12/12/1999 14:28:12  failed                      6        2     A-PNC
12/12/1999 14:27:56  delayed  2088               6        7     A-PNC
12/12/1999 14:27:24  delayed  1308               6        8     B-PNC
12/12/1999 14:27:05  delayed  1011               6        2     A-PNC
12/12/1999 14:26:38  failed                     11        4     B-PNC
12/12/1999 14:26:32  delayed  1246               3        7     A-PNC 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-49 Troubleshooting ATM-PNC 
6
Field descriptions:
Administration
Use the p roc ed ure in Table 6-13 to ad minister ATM Constric ted  Band wid th.
Switch Name:The value administered  on the system-p arameters features 
form.
DateTime and  d ate that the command  was executed .
DateSystem d ate when the event oc curred  (4-c harac ter).
Time:System time when the event occ urred
Event:The typ e of event (d elayed or failed )
Delay (msec):The delay value is only displayed for delayed events. For failed 
events, this field  is b lank. Values rang e from 250 to 20,000
From Conn:The orig inating  connec tion numb er
To Conn:The d estination c onnection numb er
PNC: A-PNC or B-PNC
Table 6-13. Constricted bandwidth administration procedure
ÖStep Action Description
1. Turn feature on Turn the feature on by chang ing  the Async. 
Transfer Mode (ATM)? field  on the customer 
op tions form (change system-parameters 
customer-options) to y (
Screen 6-20). This req uires 
a Lucent Services log in.
2. Set threshold s Set the imp airment thresholds in 4 field s on the 
ATM-Related  System Parameters form (change 
system-parameters atm) shown in 
Screen 6-21:
nActivation (%)
nDeactivation (%)
nTimeout (msec)
nDeny Calls Using Impaired Paths?
Pr es s 
En te r to effec t the chang es.
Continued on next page 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-50 Troubleshooting ATM-PNC 
6
Constricted bandwidth administration screens
Screen 6-20. Optional features—screen 2
3. Set alarm op tions Alarms g enerated d ue to imp aired  p aths are rep orted 
ag ainst the ATM-NTWK maintenanc e object. The 
d efault alarm level is WARNING, b ut may be 
ad ministered as either MINOR or WARNING.
nUse the set options and  press Enter to c hang e 
the Off-board ATM Network Alarms field  on 
the Alarm Rep orting Op tions form (
Screen 6-22).
Table 6-13. Constricted bandwidth administration procedure — Continued
ÖStep Action Description
Continued on next page
 change system-parameters customer-options                       Page   2 of   6 
                                OPTIONAL FEATURES                              
    Abbreviated Dialing Enhanced List? y                       CAS Branch? y
        Access Security Gateway (ASG)? y                         CAS Main? y
        Analog Trunk Incoming Call ID? y                Change COR by FAC? n
 A/D Grp/Sys List Dialing Start at 01? y  Cvg Of Calls Redirected Off-net? y
Answer Supervision by Call Classifier? y                      DCS (Basic)? y
                                  ARS? y                DCS Call Coverage? y
                 ARS/AAR Partitioning? y               DCS with Rerouting? y
             ARS/AAR Shortcut Dialing? n           DEFINITY Network Admin? y
                                           Digital Loss Plan Modification? n
       ASAI Proprietary Adjunct Links? y                          DS1 MSP? y
       Async. Transfer Mode (ATM) PNC? y    Emergency Access to Attendant? y
  Async. Transfer Mode (ATM) Trunking? y           Extended Cvg/Fwd Admin? y
                                 ATMS? y      External Device Alarm Admin? y
                  Attendant Vectoring? n                 Flexible Billing? y
              Audible Message Waiting? y    Forced Entry of Account Codes? y
                  Authorization Codes? y       Global Call Classification? y
        (NOTE: You must logoff & login to effect the permission changes.) 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-51 Troubleshooting ATM-PNC 
6
Screen 6-21. ATM-related system parameters
Field descriptions:
Example:
If the value for Ac tivation (%) is 5, then the value for Deac tivation (%) c an b e 0, 1, 
2, 3, or 4.
Activation (%)This field sp ec ifies the perc entag e of setup events for a 
p ath to b ec ome imp aired . That is, if the p erc entage of 
setup  events for a g iven p ath meets or exc eed s this 
ad ministered  value, then it b ec omes imp aired (see 
examp le b elow). An alarm is raised  ag ainst an ATM-IMP 
when one or more p aths originating  from that ATM-IMP 
b ec ome imp aired . [ Values 1 to 20, default is 4]  
Deactivation (%)This field sp ec ifies the perc entag e of setup events for a 
p ath to come out of the imp aired state. That is, if the 
p erc entage of setup events for an imp aired p ath meets or 
d rop s b elow this ad ministered  value, then it is no long er 
imp aired  (see examp le b elow). An alarm is retired  when no 
more imp aired  p aths are orig inating from that ATM-IMP. 
[ Values 0 to19, d efault is 3]
Timeout (msec)The maximum number of millisec ond s allowed  for an SVC 
connec tion to be comp leted  b efore b eing  c ounted  as 
d elayed. [ Values 250 to 20,000, d efault is 1000]
Deny Calls Using 
Impaired Paths?This field sp ec ifies whether to d eny calls that use 
connec tions over imp aired  p aths. If the op tion is y, then 
calls that req uire a new SVC on an impaired  p ath on the 
ac tive PNC are not c omp leted. If the op tion is n, then those 
calls are treated  ac c ord ing  to c urrent ad ministered  
p arameters for ATM PNC. [ Default is n]
change system-parameters atm                                              Page 1
                      ATM-RELATED SYSTEM PARAMETERS
  THRESHOLDS OF SETUP EVENTS TO DECLARE IMPAIRMENT
                                          Activation (%):  4
                                        Deactivation (%):  3
                                          Timeout (msec):  1000
                     
  TREATMENT DURING IMPAIRED CONDITIONS
                         Deny Calls Using Impaired Paths?  n 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Troubleshooting 
6-52 Troubleshooting ATM-PNC 
6
Screen 6-22. Alarm reporting options—screen 1
set options                                                     Page 1 of   2
                           ALARM REPORTING OPTIONS
                                              Major Minor
                       On-board Station Alarms: w    w
                      Off-board Station Alarms: w    w
         On-board Trunk Alarms (Alarm Group 1): y    y
        Off-board Trunk Alarms (Alarm Group 1): w    w
         On-board Trunk Alarms (Alarm Group 2): w    w
        Off-board Trunk Alarms (Alarm Group 2): w    w
         On-board Trunk Alarms (Alarm Group 3): w    w
        Off-board Trunk Alarms (Alarm Group 3): w    w
         On-board Trunk Alarms (Alarm Group 4): w    w
        Off-board Trunk Alarms (Alarm Group 4): w    w
                  On-board Adjunct Link Alarms: w    w
                 Off-board Adjunct Link Alarms: w    w
                    Off-board MASI Link Alarms:      w
                          Off-board DS1 Alarms: w    w
                      Off-board PI-LINK Alarms: w    w
                      Off-board Alarms (Other): w    w
  Off-board ATM Network Alarms:       w 
						

							Baselining the Customer’s Configuration 
A-1 ATM Switch Administration 
A
DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
A
Baselining the Customer ’s 
Configuration
Ap p end ix A p rovid es a worksheet for rec ord ing  information ab out the c ustomer’s 
c onfig uration. The kind s of information to b aseline inc lud es:
nATM Switc h Administration
nInterc onnec tions
nDEFINITY ECS Administration Worksheet
ATM Switch Administration
Refer to your Luc ent ATM switc h’s q uic k referenc e g uid e. 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Baselining the Customer’s Configuration 
A-2 Interconnections 
A
Interconnections
Rec ord  the interc onnec tion of fiber op tic  c abling  on the LIU form (Fi g u re  A - 1). 
Rec ord  the DEFINITY port network numb er b elow the ATM switc h p ort in Ta b l e  
A-1.
Figure A-1. Sample lightwave interface unit (LIU)
PN 15
08D02
PN 15
08E01 PN 12
07B02
PN 12
07A01
PN 16
09B02
PN 16
09A01 PN 13
07D02
PN 13
07E01
PN 17
09D02
PN 17
09E01 PN 14
08B02
PN 14
08A01
PN 9
05D02
PN 9
05E01 PN 6
04B02
PN 6
04A01
PN 10
06B02
PN 10
06A01 PN 7
04D02
PN 7
04E01
PN 11
06D02
PN 11
06E01 PN 8
05B02
PN 8
05A01
ATM-B to FM5
Data Center
ATM-A to FM5
Data Center
Lightwave Interface Unit (LIU)
fodfliu EWS 102398 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Baselining the Customer’s Configuration 
A-3 DEFINITY ECS Administration Worksheet 
A
DEFINITY ECS Administration 
Worksheet
Use the samp le worksheet in this sec tion to b aseline the c ustomer’s ATM 
c onfig uration for stand ard  and  hig h reliab ility systems (see Ta b l e  A - 1
). Make 
c op ies as need ed .
NOTE:
Be sure to leave this worksheet or a c op y of it on site. 
						

							DEFINITY ECS Release 8.2 ATM Installation,
Upgrades, and Administration  555-233-124  Issue 1
April 2000
Baselining the Customer’s Configuration 
A-4 DEFINITY ECS Administration Worksheet
A
Customer Worksheet for Standard and High Reliability Systems
Luc ent ATM switc h ad d ress (26-d igits):                                                                           
ATM  s w itc h l oc a tio n:__________________________________________
D EFIN ITY EC S s w i tc h  loc ati on:__________________________________________
Table A-1. Customer configuration worksheet for standard and high reliability systemsAT M  
switch
port
A-PNC
B-PNC
AT M -
PNC 
numberDEFINITY
location
(UUCSS
1) NameESI (MAC)
2 
address
last 12 digits
AT M -
PNC 
numberDEFINITY
location
(UUCSS) NameESI (MAC) 
address
last 12 digits
Continued on next page