Canon printer Color imageCLASS MF9280Cdn User Manual
Have a look at the manual Canon printer Color imageCLASS MF9280Cdn User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2-8 Paper Requirements Originals and Print Media To prevent paper jams, do not use any of the following: Wrinkled or creased paper Curled or rolled paper Torn paper Damp paper Very thin paper Paper which has been printed on using a thermal transfer printer (Do not copy on the reverse side.) The following types of paper do not print well: Highly textured paper Very smooth paper Shiny paper Make sure the paper is free from dust, lint, and oil stains. Be sure to test paper before purchasing large quantities. Store all paper wrapped and on a flat surface until ready for use. Keep opened packs in their original packaging in a cool, dry location. Store paper at 64.4°F–75.2°F (18°C–24°C), 40%–60% relative humidity. Use only the transparencies designed for laser printers. Ô – – – – – – Ô – – – Ô Ô Ô Ô Ô
2-9 Printable Area Originals and Print Media Printable Area The shaded area indicates the approximate printable area of LTR paper. Note that the margin widths listed are approximate and there may be slight variations in actual use.
2-10 Loading Paper Originals and Print Media Loading Paper This section describes how to load paper in the paper drawers and stack bypass tray. Handle paper carefully not to cut your hands with the edges of the paper.When installing or removing cassettes, be careful not to get your fingers caught. In the Paper Drawer This section describes how to load paper in the paper drawer or in the optional paper drawer. –– 1 Pull out the paper drawer until it stops. 2 Hold the paper drawer with both hands and remove it from the machine. 3 Hold the lock release lever of the side paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. The side paper guides move together. Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.
2-11 Loading Paper Originals and Print Media 4 Hold the lock release lever of the rear paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc. 5 Fan the paper stack and even the edges. 6 Load the paper stack of the appropriate size with the print side facing up. Align the rear edge of the paper stack with the rear paper guide. Make sure the paper stack does not exceed the load limit mark (A). The paper drawer holds approximately 250 sheets of paper (20 lb (75 g/m2)). – –
2-12 Loading Paper Originals and Print Media 7 Hold the paper drawer with both hands and set it back into the machine.8 Push the paper drawer as far as it will go. For details on loading paper in the stack bypass tray, see “In the Stack Bypass Tray,” on p. 2-16. In the Optonal Paper Drawer (Paper Drawer 2) When the optional drawer is installed in the machine, follow the procedure described below. ● 1 Pull out the optional paper drawer until it stops. 2 Hold the optional paper drawer with both hands and remove it from the machine. 3 Hold the lock release lever of the side paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. The side paper guides move together. Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc.
2-13 Loading Paper Originals and Print Media 4 Hold the lock release lever of the rear paper guides (A) and slide the guides to the mark for the size of the paper to be loaded. Make sure to set the guides to the mark for the size of the paper to be loaded correctly. If the guides are positioned incorrectly, it may cause paper jams, dirty prints, etc. 5 Fan the paper stack and even the edges. 6 Load the paper stack of the appropriate size with the print side facing up. Align the rear edge of paper stack with the rear paper guide. Make sure the paper stack does not exceed the load limit mark (A). The optional paper drawer holds approximately 500 sheets of paper (20 lb (75 g/m2)). – – 7 Hold the optional paper drawer with both hands and set it back into the machine.
2-14 Loading Paper Originals and Print Media 8 Push the paper drawer as far as it will go. For details on loading paper in the stack bypass tray, see “In the Stack Bypass Tray,” on p. 2-16.
2-15 Loading Paper Originals and Print Media When prntng paper wth a letterhead or logo (preprnted paper) usng the paper drawer: Load the paper in the proper orientation as follows. Portrait orientationLandscape orientation 1-sided printing (When in is set to (the default setting)) For details, see “Introduction of the Machine,” in the e-Manual. (with the printing side facing up)(with the printing side facing up) 1-sided printing (When in is set to ) For details, see “Introduction of the Machine,” in the e-Manual. (with the printing side facing down)(with the printing side facing down) 2-sided printing (with the front side facing down)(with the front side facing down) ●
2-16 Loading Paper Originals and Print Media In the Stack Bypass Tray If you are making prints on transparencies, labels, nonstandard-sized paper, or envelopes, load them into the stack bypass tray. Note the following points when using the stack bypass tray:Paper Quantity: one to approximately 100 sheets (20 lb (75 g/m2),) Paper Size: 3" × 5" to 8 1/2" × 14" (76.2 × 127 mm to 216 × 356 mm ) Paper Weight: 16 to 47 lb (60 to 176 g/m 2)Paper which has been rolled or curled must be straightened out prior to use, to allow the paper to feed smoothly through the stack bypass tray (allowable curl amount: less than 3/8" (10 mm) for normal paper, less than 1/4" (5 mm) for heavyweight paper). Depending on the paper storage conditions, it may not be possible to feed some paper into the stack bypass tray. In this case, set the amount of paper to less than 50 sheets 20 lb (75 g/m2).Do not load different size/type paper at the same time.If you load multiple sheets of heavyweight paper into the stack bypass tray, a paper jam may occur depending on the type of heavyweight paper. If this happens, load only one sheet of heavyweight paper at a time.When printing on special types of paper, such as heavyweight paper or transparencies, make sure to correctly set the paper type, especially if you are using heavyweight paper. If the type of paper is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing unit may become dirty and require a service repair, or the paper could jam.If you are printing on envelopes, do not allow more than 10 envelopes to accumulate in the output tray. Always empty the output tray once 10 envelopes have accumulated.If you select for copying, you cannot use the 1-Sided to 2-Sided, 2-Sided to 2-Sided, N on 1, or ID Card Copy mode. (See “Copy,” in the e-Manual.)If you select , , , , for copying, you cannot use the 1-Sided to 2-Sided, 2-Sided to 2-Sided, N on 1, or ID Card Copy mode. (See “Copy,” in the e-Manual.)You cannot use when you print from a USB memory (Direct Print). (Only for the Color imageCLASS FM9280Cdn)Envelopes may be creased in the printing process.For high quality printouts, use paper recommended by Canon.For more information on paper types that can be used with this machine, see “ Paper Requirements,” on p. 2-7. –• ••• • –– – – – – ––––
2-17 Loading Paper Originals and Print Media 1 Open the stack bypass tray. If the paper size you are going to load into the stack bypass tray is different from the paper size stored in stack bypass tray Standard Settings, set stack bypass tray Standard Settings to ‘Off ’ in Common Settings (from the Additional Functions screen). (See “Setting Paper Size and Type,” on p. 2-22.) 2 Adjust the slide guides to match the size of the paper. If you are feeding large size paper, pull out the auxiliary tray, and extend the tray extension. 3 Load the paper into the stack bypass tray. Insert the paper stack as far as it will go. ■ Before inserting paper ① When you use the stack bypass tray to make copies, straighten out curled paper prior to use, as shown below. Curled paper may cause a paper jam. ② If there is difficulty in straightening out curled paper, curl the front edges of the paper upward, as shown below.