Canon printer Color imageCLASS MF9280Cdn User Manual

							
Copying
4-4
Basic Copying Method

Basic Copying Method
This section describes the basic procedure for copying.
1 
Place originals on the platen glass or load 
it them in the feeder.
For details, see “Placing Originals,” on p. 2-4.
Close the feeder after placing your originals.
For originals you can copy, see “Originals 
Requirements,” on p. 2-
2.
When the display shows the message , enter the department ID and 
password. Then press  (Log In/Out) on the 
control panel. For details, see “Security” in the 
e-Manual.
When  in  from the Additional 
Functions screen is set to , you can 
make black and white copies without 
entering  and . (For 
details, see “Accepting B&W Copy Jobs 
without Entering the Department ID and 
Password,” in the e-Manual.) To make black 
and white copies, press the right Any key to 
select .
When the display shows the message , enter the user ID and 
password. Then press  (Log In/Out) on the 
control panel. For details, see “Security” in the 
e-Manual.
–
–
–
–
•
–
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Make the copy settings you require.
You can specify the following settings:
: Specifies the color or 
B&W. (See “ Selecting Color Mode,” on p. 4-7.) 
: Specifies the paper 
source. (See “Selecting Paper Source,” on 
p. 4-
9.)
: Adjusts the 
density and the background color of originals. 
(See  “Adjusting Density,” on p. 4-19.)
: Makes two-sided 
copies. (See  “2-Sided Copying,” on p. 4-23.)
: Adjusts the size by 
enlarging/reducing original images. (See 
“Enlarge/Reduce Images,” on p. 4-3
1.)
: Specifies 
the image type of originals. (See “Selecting 
Image Quality,” on p. 4-3
5.) 
–
–
–
–
–
– 
						

							
Copying
4-5
Basic Copying Method
: Reduces 
multiple originals to fit on one sheet of paper. 
(See “Multiple Originals onto One Sheet (N on 
1),” on p. 4-3
7.)
: Adjusts the contrast of 
the originals. (See “Adjusting Sharpness,” on 
p. 4-4
2.)
: Erases 
unnecessary shadows and lines. (See “Erasing 
Shadows/Lines,” on p. 4-4
4.) 
: Adjusts the color 
balance for the copy. (See “Adjusting Color 
Balance,” on p. 4-5
4.) 
: Sorts copies into sets. 
(See  “Collating Copies,” on p. 4-60.)
: Makes ID card 
copies. (See “Making ID Card Copies,” on 
p. 4-4
0.)
: Makes multiple 
copies. (See “Making Multiple Copies,” on 
p. 4-6
2.)
When you press  (Reset), all settings will 
return to the Standard mode. If you want to 
keep your own settings as the Standard 
mode, see “Changing Standard Mode,” on 
p. 4-6
9.
5 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
If you make a mistake when entering values, 
press  (Clear) and enter the correct values. The 
copy quantity appears on the right side of the 
Copy top screen.
You cannot change the copy quantity while the machine is copying.
–
–
–
–
–
–
–
–
6 
Press  (Start) to start copying.
When scanning is complete, remove your 
originals.
 You cannot change copy mode settings, such as the copy quantity, paper size, and copy ratio, while the machine is copying.
If you want to cancel a copy job, see 
“ Canceling Copy Jobs,” on p. 4-6, or “Checking 
and Canceling Copy Jobs/Checking Copy 
Logs,” on p. 4-7
2.
To cancel all settings and return the machine 
to the Standard mode, press  (Reset).
If the machine remains idle for more than two 
minutes, the display returns to the Main Menu 
screen (Auto Clear Time). You can change the 
value of time for the Auto Clear Time. For 
details, see “Setting Auto Clear Time,” on 
p. 1-2
3.
If you want to make another copy when there 
is an ongoing job, press the right Any key to 
select . Then repeat from the step 1.
7 
Press  (Main Menu) to return to the 
Main Menu screen.
–
–
–
–
– 
						

							
Copying
4-6
Canceling Copy Jobs

Canceling Copy Jobs
You can cancel scanning or ongoing jobs.
If you cancel a copy job during scanning, make sure to remove the original.
1 
Press the left Any key to select .
The display will return to the Copy top screen.
 While the machine is scanning, printing, or waiting to print, you can cancel a copy job by pressing  (Stop).
2 
Press  (Main Menu) to return to the 
Main Menu screen. 
						

							
Copying
4-7
Selecting Color Mode

1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then 
press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the color mode, then press [OK].
: For the automatic 
selection of color or B&W*
: For copies in full-color
: For black and white copies
*   Depending on the condition of the originals, 
the machine may not be able to properly 
distinguish between color and black-and-
white originals.
–
–
–
Selecting Color Mode
This section describes how to select the color mode (color/B&W).  
The default setting is . 
						

							
Copying
4-8
Selecting Color Mode
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
8 
Press  (Main Menu) to return to the 
Main Menu screen. 
						

							
Copying
4-9
Selecting Paper Source

Selecting Paper Source
You can manually specify a paper source.  
The default setting is .
If you are copying an original with an image that extends all the way to the edges onto the same size paper at a copy ratio of 100%, the periphery of the original image may be cut off slightly on the copy. For details, see “Scanning Area,” on p. 11-4.The suffix  (such as in STMTR), used in paper size designations, indicates that the paper is loaded in a paper drawer or the stack bypass tray horizontally.
Copying on Paper in Drawers
You can select paper drawer 1 or 2 (optional) for a copy. You need to set up the paper size and type for each 
drawer in advance. For details about configuring the paper size and type, see “Setting Paper Size and Type,” on 
p. 2-2
2.
–
–
1 
Set originals.
For details, see  “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then 
press [OK]. 
						

							
Copying
4-10
Selecting Paper Source
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper source, then press [OK].
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
8 
Press  (Main Menu) to return to the 
Main Menu screen. 
						

							
Copying
4-11
Selecting Paper Source

1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Load the paper into the stack bypass tray.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper size, then press [OK].
You can select from the following paper sizes:
, , , , , 
, , , , 
For details, see “Paper Requirements,” on p. 2-7.
The available paper sizes will vary depending on the country where the unit was purchased.
Using Stack Bypass Tray with Standard Paper Sizes
This section describes how to copy onto standard-sized paper using the stack bypass tray.
If  setting in  from the Additional Functions screen is set to , the paper size/type setting screen appears when you load paper in the stack bypass tray. If  is set to , copying can be performed only for the registered paper size and type. (See  “Setting Paper Size and Type,” on p. 2-22.) 
						

							
Copying
4-12
Selecting Paper Source
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper type, then press [OK].
You can select from the following paper types:
, , , 
, , , , 
, 
For details, see “Paper Requirements,” on p. 2-7.
If you want to print the back side of the printed paper, press the right Any key to select .
7 
Press [OK] to select .
The selected paper size is displayed next to 
.
8 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
9 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press  (Start) 
once for each page.
10
 Press  (Main Menu) to return to the 
Main Menu screen. 
						

							
Copying
4-13
Selecting Paper Source

1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Load the paper into the stack bypass tray.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
6 
Press [OK] to select the horizontal length 
.
Using Stack Bypass Tray with Irregular Sizes of Paper
This section describes how to copy onto non-standard-sized paper using the stack bypass tray.
If  setting in  from the Additional Functions screen is set to , the paper size/type setting screen appears when you load paper in the stack bypass tray. If  is set to , copying can be performed only for the registered paper size and type. (See  “Setting Paper Size and Type,” on p. 2-22.)