Canon Imageclass Mf7470 User Guide

							
Machine Settings
12‑32

System Settings
IPv6 SettingsSets IPv6 Address settings.
Use IPv6Sets the use of IPv6 address.
Off
On
–
–
Stateless Address 
Settings
Sets the machine to obtain the IPv6 address automatically 
using the machine’s MAC address and the prefix (information 
indicating the network belonged to) included in the RA 
(Router Advertisement) notified by the router when the 
machine is started.
Off
On
–
–
Manual Address SettingsSets whether to set a fixed IPv6 address to the machine. 
OffA fixed IPv6 address is not set.
OnSets a fixed IPv6 address to the machine.
Manual AddressRegisters a fixed IPv6 address to the machine.
Prefix LengthSets the prefix length of the IPv6 address. (0‑128)
Default Router 
Addr.
Sets the default router address.
Use DHCPv6Sets whether to use DHCPv6.
Off
On
–
–
PING CommandChecks the TCP/IPv6 network connection.
IPv6 AddressChecks the network connection by specifying the IPv6 
address.
Host NameChecks the network connection by specifying the host name.
 
						

							
12‑33
Machine Settings

System Settings
IP Address Range 
Settings
Sets whether to use the IP address filter function.
OffDisables the IP address filter.
OnEnables the IP address filter.
Permit/RejectSelects whether to permit or reject access from a specified 
IPv6 address or IPv6 address range.
Reg.Specifies the IPv6 address or IPv6 address range to be 
restricted.
Single AddressSpecifies a single IPv6 address to be restricted.
Multiple 
Addresses
Specifies a range of IPv6 addresses to be restricted.
Prefix AddressSpecifies a prefix address on IPv6 addresses to be restricted.
EditEdits the IPv6 address or IPv6 address range to be restricted.
EraseErases the IPv6 address or IPv6 address range to be restricted.
DNS ServerSets the DNS server settings.
DNS Server Address 
Settings
Registers the DNS server address.
Primary DNS 
Server
Registers the primary server address.
Secondary DNS 
Server
Registers the secondary server address.
DNS Host Name/
Domain Name 
Settings
Registers the host name and domain name of the DNS server.
Use Same Host 
Name/Domain 
Name as IPv4
Sets whether to use the same host name and domain name 
as IPv4.
Off
On
–
–
Host NameRegisters the host name of the DNS server.
Domain NameRegisters the domain name of the DNS server.
DNS Dynamic Update 
Settings
Sets whether to use the DNS server dynamic update function.
Off
On
–
–
 
						

							
Machine Settings
12‑34

System Settings
WINS ConfigurationSets the WINS settings to resolve a name with WINS.
OffSets the machine not to resolve a name with WINS.
OnSets the machine to resolve a name with WINS.
WINS ServerRegisters the IP address of a WINS server.
LPD SettingsSets whether to use LPD as the print application.
On
Off
–
–
RAW SettingsSets whether to use RAW as the print application.
OnEnables the use of RAW.
Use BidirectionalSets whether to use bidirectional communication.
On
Off
–
–
OffDisables the use of RAW.
Use PASV Mode for FTPSets whether to use the PASV mode for FTP.
Off
On
–
–
FTP ExtensionSets whether to use the FTP extension.
Off
On
–
–
Use HTTPSets whether to activate HTTP (HyperText Transfer Protocol) 
for the Remote UI.
On
Off
–
–
Port Number SettingsSets the port number settings.
LPD0‑65535 (default: 515)
RAW0‑65535 (default: 9100)
HTTP0‑65535 (default: 80)
SMTP Receive0‑65535 (default: 25)
POP3 Receive0‑65535 (default: 110)
FTP Sending0‑65535 (default: 21)
SMTP Sending0‑65535 (default: 25)
SNMP0‑65535 (default: 161)
 
						

							
12‑35
Machine Settings

System Settings
Receiving MAC Address 
Settings
Sets whether to activate a MAC address filter.
OffDisables MAC address filter.
OnSpecifies a MAC address filter to access. MAC address must 
be entered for each setting.
RegisterRegisters MAC addresses. Up to five MAC addresses can be 
registered.
EditEdits MAC addresses.
EraseErases MAC addresses.
Proxy SettingsSets the proxy settings.
Use ProxySets the use of a proxy server.
OffProxy server is not used.
OnProxy server is used.
Server AddressSets a proxy server IP address or FQDN.
Port NumberSets the port number of a proxy server.
Use Proxy within 
the Same Domain
Sets whether to use a proxy in the same domain.
Authentication 
Settings
Sets proxy authentication.
OffDisables proxy authentication.
OnEnables proxy authentication.
UserSets the user name to use for proxy authentication.
PasswordSets the password to use for proxy authentication.
 
						

							
Machine Settings
12‑36

System Settings
SMB SettingsSets the SMB settings to use the machine on a NetBIOS 
network.
Use SMB ClientSets whether to use SMB Client.
OffSMB client is not used.
OnSMB client is used.
ServerEnters the NetBIOS name of the machine.
WorkgroupEnters the name of the workgroup the machine belongs to.
CommentEnters a comment about the printer.
LM AnnounceSets if the machine notifies the LAN Manager of its existence.
Off
On
–
–
SNMP SettingsSets detailed information about SNMP.
Use SNMPSets whether to activate SNMP.
OnActivates SNMP.
Community NameSets SNMP community name (default: public).
Writable SNMPEnables computers on the network to access the machine 
and modify its settings.
On
Off
–
–
Get Printer 
Management 
Information from 
Host
Sets whether to get printer management information from 
host.
OffDeactivates SNMP.
 
						

							
12‑37
Machine Settings

System Settings
Enable Dedicated PortSets or browses detailed information on the machine with a 
Canon printer driver or utility.
On
Off
–
–
Ethernet Driver SettingsSpecifies the type of network connection.
Auto DetectSelects the detection method of Ethernet driver.
OnSets the machine to determine the communication mode 
(Half duplex/Full duplex) and Ethernet type (10Base‑
T/100Base‑TX) automatically.
OffSets the communication mode and Ethernet type manually.
Communication 
Mode
Selects the communication mode.
Half Duplex
Full Duplex
–
–
Ethernet TypeSelects the Ethernet type.10 Base‑T
100 Base‑TX
–
–
E ‑mail/I ‑Fax*
1Sets detailed settings for e‑mail/I‑fax.
SMTP Receive Sets whether to receive e‑mail/l‑faxes using the machine’s 
own SMTP receiving function.
Off
On
–
–
POPSets whether to receive e‑mail/l‑faxes using a POP server.
Off
On
–
–
Authentication/EncryptionSpecifies authenticating method before sending e‑mail.
POP Authentication 
before Send
Sets whether to use the SMTP server requires POP before 
SMTP (method for authenticating users who have logged in 
the POP server before sending e‑mail).
Off
On
–
–
*1 Indicates the item that appear only for the imageCLASS MF7480.
 
						

							
Machine Settings
12‑38

System Settings
SMTP Authentication 
(SMTP AUTH)
Sets whether to use the SMTP server requires SMTP 
Authentication (method for authenticating users who have 
logged in the POP server before sending e‑mail).
OffDisables SMTP Authentication.
OnEnables SMTP Authentication.
User
Password
–
–
SMTP ServerRegisters the SMTP server name.
E ‑mail Address Enters the e‑mail address your machine will use (max. 64 
characters).
POP ServerEnters the POP server IP address or name (max. 48 
characters).
POP AddressEnters the login name for access to the POP server (max. 32 
characters).
POP PasswordEnters the password for access to the POP server (max. 32 
characters).
POP IntervalSets the interval you want the POP server to check for 
incoming e‑mail. If the interval is set to 0, the POP server is 
not checked automatically. (1‑99)
Startup Time SettingsSets the time period required to delay the startup of network 
communications for the machine (0‑300sec).
Communications Settings Sets the fax and e‑mail/I‑fax communication.
E ‑mail/I ‑Fax Settings
*1Sets the e‑mail/I‑fax communications.
Maximum TX Data Size Sets the maximum data size for outgoing e‑mail messages 
and I‑fax documents. If the e‑mail message send job exceeds 
this data size limit, it is split up into several e‑mail messages 
before being sent. However, if an I‑fax transmission exceeds 
the data size limit, it is handled as an error, and it is not sent.
(0MB‑99MB)
Divided TX over Max.Data 
Size
Sets whether to divide a document into separate files when it 
is sent if its size exceeds the data size you specify.
Off
On
–
–
Default SubjectThe subject that you enter here is used as the default subject 
whenever you do not enter a subject when sending a job.
*1 Indicates the item that appear only for the imageCLASS MF7480.
 
						

							
12‑39
Machine Settings

System Settings
Fax SettingsSets the facsimile communication.
Send Start SpeedSets the transmission start speed for faxes. (33600bps, 
14400bps, 9600bps, 7200bps, 4800bps, 2400bps)
Receive Start SpeedSets the reception start speed for faxes. (33600bps, 
14400bps, 9600bps, 7200bps, 4800bps, 2400bps)
Memory Lock SettingsSets whether to receive and store all documents in memory 
and not to print automatically. (See Chapter 4, “Sending and 
Receiving,” in the Reference Guide.)
Off
On
–
–
Memory Lock PasswordRegisters the password that protects the authority for 
accessing Memory Lock settings.
Report PrintSets whether to print a report on memory lock reception.
Off
On
–
–
Memory Lock Time SettingsSets whether to set a period for memory lock reception.
OffDisables setting a period of memory lock reception.
OnEnables setting a period of memory lock reception.
Memory Lock Start Time
Memory Lock End Time
–
–
Forwarding SettingsSets the machine to forward received I‑fax documents to 
other machines or the file servers. If a received document 
matches the forwarding conditions, it is forwarded to the 
specified destination.
Validate/InvalidateTurns on or off the forwarding mode.
RegisterRegisters forwarding conditions.
Condition NameSets a name for the forwarding condition. You can enter up 
to 50 characters for the condition name.
Forwarding ConditionsSets the forwarding condition.
 
						

							
Machine Settings
12‑40

System Settings
FaxSets the forwarding condition for received fax documents.
[disregarded]: Disregards the Fax Number information as a 
forwarding condition.
[does not exist]: Forwards the document if the Fax 
Number information does not exist.
[equals]: Forwards the document if the Fax Number 
information matches all of the characters entered.
[differs from]: Forwards the document if the Fax Number 
information differs from the characters entered.
[begins with]: Forwards the document if the Fax Number 
information begins with the characters entered.
[ends with]: Forwards the document if the Fax Number 
information ends with the characters entered.
[contains]: Forwards the document if the Fax Number 
information contains the characters entered.
[does not contain]: Forwards the document if the Fax 
Number information does not contain the characters 
entered.
–
–
–
–
–
–
–
–
I ‑ Fax*
1Sets the forwarding condition for received I‑fax documents.
[disregarded]: Disregards the Destination, From, or Subject 
information as forwarding conditions.
[equals]: Forwards the document if the From or Subject 
information matches all of the characters entered.
[differs from]: Forwards the document if the Destination, 
From, or Subject information differs from the characters 
entered.
[begins with]: Forwards the document if the Destination, 
From, or Subject information begins with the characters 
entered.
[ends with]: Forwards the document if the Destination, 
From, or Subject information ends with the characters 
entered.
[contains]: Forwards the document if the Destination, 
From, or Subject information contains the characters 
entered.
[does not contain]: Forwards the document if the 
Destination, From, or Subject information does not 
contain the characters entered.
–
–
–
–
–
–
–
Forwarding DestinationSets the destination address to forward the document.
File Format*1Sets the file format of the document you want to forward.
TIFF
PDF
–
–
*1 Indicates the item that appear only for the imageCLASS MF7480.
 
						

							
12‑41
Machine Settings

System Settings
Forward w/o Cond.Sets whether to store the forwarding destinations of a 
received document if the forwarding settings of the received 
document are not registered, or if the received document 
does not match all of the forwarding conditions that you 
have specified.
Forwarding DestinationSets the destination address to forward the document.
File Format*1Sets the file format of the document you want to forward.
TIFF
PDF
–
–
Detail/EditYou can check or change forwarding settings that have been 
stored.
EraseErases the selected forwarding condition.
Print ListPrints the forwarding conditions list.
Remote UI On/Off*2Sets whether to activate the Remote UI function to operate 
the machine and change the settings from a network 
computer using a web browser.
On
Of
–
–
Restrict the Send FunctionSets restrictions on the Send function.
Address Book PasswordSets a password to restrict editing the Address Book. (7 digits 
maximum)
Off
On
–
–
Restrict New AddressesSets whether to restrict registering or changing destinations 
in the Address Book. Sets whether to restrict making calls to 
the destinations not registered in Address Book. 
Off
On
–
–
Allow Fax Driver TXSets whether to restrict sending faxes from a computer using 
the fax driver.
On
Off
–
–
Confirm Entered Fax NumbersSets whether to confirm the entered fax numbers each time 
you send a fax.
Off
On
–
–
*1 Indicates the item that appear only for the imageCLASS MF7480.
*2 Indicates the item that appear only for the imageCLASS MF7480/MF7470.