Home > Canon > Printer > Canon Imageclass Mf7470 User Guide

Canon Imageclass Mf7470 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Canon Imageclass Mf7470 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							
    Troubleshooting
    11‑4
    
    3 Continue to follow the procedure 
    and instructions on the touch 
    panel display.
    Once you have cleared all of the jammed 
    paper in locations other than the feeder, 
    printing or copying resumes.
    If there is paper that still needs to be 
    removed, a screen indicating how to clear 
    that paper jam appears on the touch panel 
    display. Repeat the procedure from step 1.
    You do not have to re‑enter the number 
    of copies or prints, even if you are printing 
    multiple sets. The machine automatically 
    recalculates the number of copies or prints 
    to make based on the number of sheets that 
    have jammed.
     
    						
    							
    11‑5
    Troubleshooting
    
    Feeder
    If a paper jam occurs in the feeder, a screen similar to the one shown below appears on 
    the touch panel display. Check the location of the paper jam, and follow the procedure 
    described below, and the procedure that appears on the touch panel display, to remove the 
    jammed paper.
    1 Open the feeder cover.
    2 Remove any jammed originals.
    Do not pull the jammed original forcefully. 
    Doing so may tear the original.
    3 Open the inner cover (A), holding it 
    by its front tab.
    4 Turn the feed dial and remove any 
    jammed originals.
     
    						
    							
    Troubleshooting
    11‑6
    
    If you cannot remove the original, proceed to 
    step 5.
    5 Close the inner cover.
    Be careful not to get your fingers caught.
    6 Close the feeder cover.
    Be careful not to get your fingers caught.
    7 Open the feeder and remove any 
    jammed originals.
    8 Close the feeder.
    Be careful not to get your fingers caught.
    9 Follow the instructions on the 
    touch panel display.
    The screen indicating the location of the 
    paper jam repeatedly appears on the touch 
    panel display until the paper jam is entirely 
    cleared. For more information, see “Clearing 
    Jams,” on p. 11‑2.
     
    						
    							
    11‑7
    Troubleshooting
    
    Stack Bypass
    If a paper jam occurs inside the stack bypass, a screen similar to the one shown below 
    appears on the touch panel display. Check the location of the paper jam, and follow the 
    procedure described below, and the procedure that appears on the touch panel display, to 
    remove the jammed paper.
    1 Remove all paper from the stack 
    bypass.
    2 Remove any jammed paper.
    If you cannot remove the jammed paper, 
    follow the procedures described in “Fixing 
    Unit (Inside the Main Unit),” on p. 11‑8.
    3  Follow the instructions on the 
    touch panel display.
    The screen indicating the location of the 
    paper jam repeatedly appears on the touch 
    panel display until the paper jam is entirely 
    cleared. For more information, see “Clearing 
    Jams,” on p. 11‑2.
     
    						
    							
    Troubleshooting
    11‑8
    
    Fixing Unit (Inside the Main Unit)
    If a paper jam occurs in the fixing unit area, a screen similar to the one shown below 
    appears on the touch panel display. Check the location of the paper jam, and follow the 
    procedure described below, and the procedure that appears on the touch panel display, to 
    remove the jammed paper.
    1 Press the button on the left cover 
    of the main unit, and open the left 
    cover.
    2 Push down the green fixing lever.
    The parts located around the exit slot guide 
    and the fixing unit are subject to high 
    temperatures. When removing jammed 
    paper, take care not to touch anything in this 
    area except the lever.
     
    						
    							
    11‑9
    Troubleshooting
    
    3 Use the green tab to lift up the exit 
    slot cover and remove any jammed 
    paper.
    4 While holding down the lever on 
    the right corner of the fixing unit, 
    open the upper cover of the fixing 
    unit and remove any jammed 
    paper.
    5 Remove any jammed paper that is 
    protruding from the lower part of 
    the fixing unit.
    The parts inside the fixing unit are subject to 
    high‑temperatures. When removing jammed 
    paper, take care not to touch anything in this 
    area, except the upper cover.
    6 Push up the green fixing lever.
     
    						
    							
    Troubleshooting
    11‑10
    
    7 Place your hand where the hand 
    symbol () is located on the left 
    cover of the main unit, and then 
    gently close the left cover until 
    it clicks into place in the closed 
    position.
    Be careful not to get your fingers caught.
    8 Follow the instructions on the 
    touch panel display.
    The screen indicating the location of the 
    paper jam repeatedly appears on the touch 
    panel display until the paper jam is entirely 
    cleared. For more information, see “Clearing 
    Jams,” on p. 11‑2.
     
    						
    							
    11‑11
    Troubleshooting
    
    Duplex Unit
    If a paper jam occurs inside the duplex unit, a screen similar to the one shown below 
    appears on the touch panel display. Check the location of the paper jam, and follow the 
    procedure described below, and the procedure that appears on the touch panel display, to 
    remove the jammed paper.
    1 Press the button on the left cover 
    of the main unit, and open the left 
    cover.
    2 Remove any jammed paper.
    Some parts of the duplex unit are subject to 
    high temperature. When removing jammed 
    paper, take care not to touch anything in this 
    unit.
     
    						
    							
    Troubleshooting
    11‑12
    
    When removing the jammed paper from the 
    bottom of the duplex unit, pull the jammed 
    paper slightly toward the inside. Do not pull 
    the jammed paper right below.
    3 Place your hand where the hand 
    symbol () is located on the left 
    cover of the main unit, and then 
    gently close the left cover until 
    it clicks into place in the closed 
    position.
    Be careful not to get your fingers caught.
    4 Follow the instructions on the 
    touch panel display.
    The screen indicating the location of the 
    paper jam repeatedly appears on the touch 
    panel display until the paper jam is entirely 
    cleared. For more information, see “Clearing 
    Jams,” on p. 11‑2.
     
    						
    							
    11‑13
    Troubleshooting
    
    Paper Drawer 1
    If a paper jam occurs inside the paper drawer 1, a screen similar to the one shown below 
    appears on the touch panel display. Check the location of the paper jam, and follow the 
    procedure described below, and the procedure that appears on the touch panel display, to 
    remove the jammed paper.
    1 Press the button on the left cover 
    of the main unit, and open the left 
    cover.
    2 Open the paper drawer’s left cover.
    3 Remove any jammed paper.
     
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon Imageclass Mf7470 User Guide