Canon Imageclass Mf7470 User Guide

							
Copying
3‑24

4 
① Press [Group].
②  Press [OK].
If you want to rotate the output sheet, 
press [Rotate] and proceed to step 5. 
Otherwise, press [OK] and skip to step 7.
5 
6 
①  Select [A4], [A4R], [B5], [B5R], [LTR], or 
[LTRR].
②  Press [OK].
[Rotate] can be selected only in the 
following cases:
If the available paper size is selected 
manually
If the available paper size is loaded 
in both the horizontal and vertical 
directions
The selected paper source must have 
Drawer Eligibility For APS/ADS in 
Common Settings (from the Additional 
Functions screen) set to [On]. (See 
“Drawer Eligibility For APS/ADS,” on 
p. 
12‑7.)
When you have selected Automatic Paper 
Selection for the Rotate mode, make sure 
to select a paper size which can be rotated. 
Otherwise, output will not be rotated.
If there is no paper which can be rotated, 
output will be collated.
7  Press  (Start).
If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display. Press  (Start) once for 
each original. When scanning is complete, 
press [Done].
To cancel this setting, press [Finishing], 
then press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
–
–
–
–
–
–
 
						

							
3‑25
Copying

Two-Sided Copying
This mode enables you to make two-sided copies from one-sided or two-sided 
originals, or make one-sided copies from two-sided originals.
You may not be able to make two‑sided copies on some types of paper, depending on the paper.
If you are copying in the 2‑Sided mode, align the top edge of the original with the back edge of the platen 
glass (by the arrow in the top left corner), or with the back edge of \
the feeder.
The 2‑Sided mode you have selected is displayed above [2‑Sided] on the Copy Basic Features screen.
Paper used to make two‑sided copies must conform to the following specifications:Paper size: 11" x 17", LGL, LTR, LTRR, EXEC, STMTR (envelopes cannot be used for two‑sided copying)
Paper weight: 17 to 24 lb bond (64 to 90 g/m
2)
If you select [Irreg. Size] for copying, you cannot use the 1 ▶  2‑Sided, 2 ▶ 2‑Sided, Book ▶ 2‑Sided, or 2‑page 
Separation mode. (See chapter 3, “Copying,” in the Reference Guid\
e.)
If you select [Envelope] for copying, you cannot use 1 ▶ 2‑Sided, 2 ▶ 2‑Sided, Book ▶ 2‑Sided, 2‑page 
Separation mode. (See chapter 3, “Copying,” in the Reference Guid\
e.)
Making Two-Sided Copies from One-Sided Originals (1 ▶ 2-Sided)
This feature enables you to make two ‑sided copies from one‑sided originals.
OriginalsCopy
Making Two-Sided Copies from Two-Sided Originals (2 ▶ 2-Sided)
This feature enables you to make two ‑sided copies from two‑sided originals. If the originals 
are placed in the feeder, they are automatically turned over to make two ‑sided copies.
OriginalCopy
–
–
–
–
–
–
–
–
Ô
Ô
 
						

							
Copying
3‑26

Making One-Sided Copies from Two-Sided Originals (2 ▶ 1-Sided)
This feature automatically turns over two‑sided originals placed in the feeder to make one ‑
sided copies on different sheets of paper.
CopiesOriginal
Making Two-Sided Copies from Facing Pages in a Book (Book ▶ 2-Sided)
This feature enables you to make two‑sided copies from facing pages, or from the front and 
back sides of a page in bound originals, such as books and magazines.
Place your original on the platen glass. The Book to 2‑Sided mode cannot be used when the original is placed 
in the feeder.
Left/Right Two‑sided
 
This setting makes two‑sided copies from facing pages.
1
12
2
1
CopiesOriginal
Front/Back Two‑sided 
This setting makes two‑sided copies from the front and back sides of a page.
2
12
1
CopiesOriginal
Ô
Ô
–
–
–
 
						

							
3‑27
Copying

1 to 2-Sided
This feature enables you to make two‑sided copies from one‑sided originals.
The 1 ▶ 2‑Sided mode cannot be used with the Two‑page Separation or Image Combination mode.
If there are an odd number of originals, the back side of the last copy \
is left blank.
If the 1 ▶ 2‑Sided mode is used with the Different Size Originals mode, the copies of different size originals 
will be printed as one‑sided copies on paper of their respective sizes. If you want to make two‑sided copies 
with different size originals, you must select the paper size beforehand. (See “Paper Selection ,” on p. 3‑4.)
–
–
–
1  Press  (COPY).
2 Place your originals.
3 
4 
To set the orientation of the two-
sided copies:
1
2
① Select the type of two‑sided 
orientation.
Details of each item are shown below.
[Book Type]: The front and back sides 
of the copy will have the same top‑
bottom orientation.
[Calendar Type]: The front and back 
sides of the copy will have opposite 
top‑bottom orientations.
②  Press [Done].
Ô
ƒ
„
ƒ
„
 
						

							
Copying
3‑28

5 6 Press  (Start).
If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display. Press  (Start) once for 
each original. When scanning is complete, 
press [Done]. 
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
2 to 2-Sided
This feature enables you to make two ‑sided copies from two‑sided originals. If a two ‑sided 
original is placed in the feeder, it is automatically turned over so that both sides of the 
original are copied on the front and back sides of a copy sheet.
The 2 ▶ 2‑Sided mode cannot be used with the Two‑page Separation or Image Combination mode.
1  Press  (COPY).
2 Place your originals.
3 
4 
To set the orientation of the 
originals and the copies:
1
Ô
 
						

							
3‑29
Copying

2
① Select the type of two‑sided orientation 
for the originals and the copies.
Details of each item are shown below.
Original
[Book Type]: The front and back sides of 
the original have the same top‑bottom 
orientation.
[Calendar Type]: The front and back 
sides of the original have opposite top‑
bottom orientations.
Copy
[Book Type]: The front and back sides 
of the copy will have the same top‑
bottom orientation.
[Calendar Type]: The front and back 
sides of the copy will have opposite 
top‑bottom orientations.
②  Press [Done].
„
ƒ
„
ƒ5 
6  Press  (Start).
If the original is placed on the platen glass, 
follow the instructions that appear on the 
touch panel display. Press  (Start) once for 
each original. When scanning is complete, 
press [Done].
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
2 to 1-Sided
This feature automatically turns over two ‑sided originals placed in the feeder to make one ‑
sided copies on different sheets of paper.
The 2 ▶ 1‑Sided mode cannot be used with the 2‑page Separation or Image Combination mode.
Make sure to place originals, such as LTRR, horizontally. If these origi\
nals are placed vertically, the back side of 
the copy is printed upside down.
–
–
1  Press  (COPY).
2 Place your originals into the 
feeder.
3 
 
						

							
Copying
3‑30

4 
To set the orientation of the 
originals :
1
2
① Select the orientation of the originals.
Details of each item are shown below.
[Book Type]: The front and back sides of 
the original have the same top‑bottom 
orientation.
[Calendar Type]: The front and back 
sides of the original have opposite top‑
bottom orientations.
②  Press [Done].
Ô
ƒ
„
ƒ
„
5 
6  Press  (Start).
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
 
						

							
3‑31
Copying

Book to 2-Sided 
This feature enables you to make two‑sided copies from facing pages, or from the front and 
back sides of a page in bound originals, such as books and magazines.
The Book ▶ 2‑Sided mode cannot be used with the 2‑page Separation, Image Combination, Binding Erase, or 
Different Size Originals mode.
Only LTR paper can be used for Book ▶ 2‑Sided copying.
If you select [Front/Back Two‑sided], the front side of the first two‑sided page and the back side of the last 
two‑sided page are left blank.
Place your original on the platen glass. The Book ▶  2‑Sided mode cannot be used when the original is placed 
in the feeder.
–
–
–
–
1  Press  (COPY).
2 Place your original on the platen 
glass.
3 
To make copies in the correct page order, 
begin copying from the first open page of the 
book or bound original.
Place your original face down, making sure 
that its top edge is aligned with the back 
edge of the platen glass (by the arrow in the 
top left corner).
4 
① Press [Book ▶  2‑Sided].
② Press [Next].
5 
①  Select the desired type of two‑sided 
layout.
Details of each item are shown below.
[Left/Right 2‑sided] : The facing pages of a 
book or bound original are copied on the 
front and back sides of a single sheet of 
paper.
[Front/Back 2‑sided]: The front and back 
sides of the left page, or the front and 
back sides of the right page, are copied on 
the front and back sides of a single sheet 
of paper.
②  Press [OK].
ƒƒ
ƒ
„
ƒ
„
 
						

							
Copying
3‑32

6 Press  (Start).
To copy the next two facing pages, turn the 
page of the original. Place your original on 
the platen glass, then press  (Start).
7 
To cancel this setting, press [2‑Sided], then 
press [Cancel].
To cancel all settings and return the 
machine to the Standard mode, press 
 (Reset).
–
–
 
						

							
3‑33
Copying

Confirming Settings
Copy mode settings that you have specified, including those that are set from the 
Special Features screen, are all grouped together onto one screen so you can easily 
check them.
1 
2 
① Check the settings.
②  Press [Done].
A right triangle (▶) on a copy mode setting 
key indicates that more setting screens are 
available by pressing the key.
ƒ
„
ƒ
„