Nortel Modular Ics 6.1 Installer Guide
Have a look at the manual Nortel Modular Ics 6.1 Installer Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 211 Nortel manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Connecting the wiring / 261 P0603534 02Modular ICS 6.1 Installer Guide BRI Wiring charts A BRI Card in Slot 4 uses loops 201 through 204. A BRI card in Slot 3 uses loops 225 through 228 (profile 1, 3, or 4) or 231- 238 (profile 2). Because a BRI-U2 Card has only two loops, it only uses the first two loop numbers 201-202 and 225-226, (profile 1, 3, or 4) or 231-232 (profile 2) when it occupies an ICS slot. The loops appearing on a BRI card may be automatically assigned lines, or you can assign one or more ISDN DNs under Hardware. If the loop is configured as T or NT, lines are automatically assigned. If the loop is configured as S or LT, you can assign one or more ISDN DNs to the loop. The emergency telephone connections (ET2 and ET1) cannot be used if a BRI card is installed in Slot 3 or Slot 4. For more information about configuring BRI cards refer to BRI Card on page 54 in Welcome to ISDN and BRI card on page 498 in Hardware. ICS ST Interface Cards wiring (profile 1, 3 or 4) Pin Wire color Port (loop) Service Lines (T-loop) TE (S loop) 26 White-Blue 201 +Tx 001-002 Assigned DN 1 Blue-White 201 -Tx 001-002 Assigned DN 27 White-Orange 201 +Rx 001-002 Assigned DN 2 Orange-White 201 -Rx 001-002 Assigned DN 28 White-Green 202 +Tx 003-004 Assigned DN 3 Green-White 202 -Tx 003-004 Assigned DN 29 White-Brown 202 +Rx 003-004 Assigned DN 4 Brown-White 202 -Rx 003-004 Assigned DN 30 White-Slate 203 +Tx 005-006 Assigned DN 5 Slate-White 203 -Tx 005-006 Assigned DN 31 Red-Blue 203 +Rx 005-006 Assigned DN 6 Blue-Red 203 -Rx 005-006 Assigned DN 32 Red-Orange 204 +Tx 007-008 Assigned DN 7 Orange-Red 204 -Tx 007-008 Assigned DN 33 Red-Green 204 +Rx 007-008 Assigned DN 8 Green-Red 204 -Rx 007-008 Assigned DN
262 / Connecting the wiring Modular ICS 6.1 Installer GuideP0603534 02 BRI S or T wiring is polarity sensitive. Tx and Rx are Transmit and Receive for Norstar.34 Red-Brown 225 +Tx 031-032 Assigned DN 9 Brown-Red 225 -Tx 031-032 Assigned DN 35 Red-Slate 225 +Rx 031-032 Assigned DN 10 Slate-Red 225 -Rx 031-032 Assigned DN 36 Black-Blue 226 +Tx 033-034 Assigned DN 11 Blue-Black 226 -Tx 033-034 Assigned DN 37 Black-Orange 226 +Rx 033-034 Assigned DN 12 Orange-Black 226 -Rx 033-034 Assigned DN 38 Black-Green 227 +Tx 035-036 Assigned DN 13 Green-Black 227 -Tx 035-036 Assigned DN 39 Black-Brown 227 +Rx 035-036 Assigned DN 14 Brown-Black 227 -Rx 035-036 Assigned DN 40 Black-Slate 228 +Tx 037-038 Assigned DN 15 Slate-Black 228 -Tx 037-038 Assigned DN 41 Yellow-Blue 228 +Rx 037-038 Assigned DN 16 Blue-Yellow 228 -Rx 037-038 Assigned DN 42 Yellow-Orange ---- ---- ---- --- 17 Orange-Yellow ---- ---- ---- --- 43 Yellow-Green ---- T ET1 --- 18 Green-Yellow ---- R ET1 --- 44 Yellow-Brown ---- T ET2 --- 19 Brown-Yellow ---- R ET2 --- 45 Yellow-Slate ---- ---- ---- --- 20 Slate-Yellow ---- ---- ---- --- 46 Violet-Blue ---- ---- ---- --- 21 Blue-Violet ---- ---- ---- --- 47 Violet-Orange ---- ---- ---- --- 22 Orange-Violet ---- ---- ---- --- 48 Violet-Green ---- ---- ---- --- 23 Green-Violet ---- ---- ---- --- 49 Violet-Brown ---- ---- ---- --- 24 Brown-Violet ---- ---- ---- --- 50 Violet-Slate ---- ---- ---- --- 25 Slate-Violet ---- ---- ---- --- ICS ST Interface Cards wiring (profile 1, 3 or 4) (Continued) Pin Wire color Port (loop) Service Lines (T-loop) TE (S loop)
Connecting the wiring / 263 P0603534 02Modular ICS 6.1 Installer Guide ICS ST Interface Cards wiring (profile 2) Pin Wire color Port (loop) Service Lines (T-loop) TE (S loop) 26 White-Blue 201 +Tx 001-002 Assigned DN 1 Blue-White 201 -Tx 001-002 Assigned DN 27 White-Orange 201 +Rx 001-002 Assigned DN 2 Orange-White 201 -Rx 001-002 Assigned DN 28 White-Green 202 +Tx 003-004 Assigned DN 3 Green-White 202 -Tx 003-004 Assigned DN 29 White-Brown 202 +Rx 003-004 Assigned DN 4 Brown-White 202 -Rx 003-004 Assigned DN 30 White-Slate 203 +Tx 005-006 Assigned DN 5 Slate-White 203 -Tx 005-006 Assigned DN 31 Red-Blue 203 +Rx 005-006 Assigned DN 6 Blue-Red 203 -Rx 005-006 Assigned DN 32 Red-Orange 204 +Tx 007-008 Assigned DN 7 Orange-Red 204 -Tx 007-008 Assigned DN 33 Red-Green 204 +Rx 007-008 Assigned DN 8 Green-Red 204 -Rx 007-008 Assigned DN 34 Red-Brown 231 +Tx 031-032 Assigned DN 9 Brown-Red 231 -Tx 031-032 Assigned DN 35 Red-Slate 231 +Rx 031-032 Assigned DN 10 Slate-Red 231 -Rx 031-032 Assigned DN 36 Black-Blue 232 +Tx 033-034 Assigned DN 11 Blue-Black 232 -Tx 033-034 Assigned DN 37 Black-Orange 232 +Rx 033-034 Assigned DN 12 Orange-Black 232 -Rx 033-034 Assigned DN 38 Black-Green 233 +Tx 035-036 Assigned DN 13 Green-Black 233 -Tx 035-036 Assigned DN 39 Black-Brown 233 +Rx 035-036 Assigned DN 14 Brown-Black 233 -Rx 035-036 Assigned DN 40 Black-Slate 234 +Tx 037-038 Assigned DN 15 Slate-Black 234 -Tx 037-038 Assigned DN 41 Yellow-Blue 234 +Rx 037-038 Assigned DN 16 Blue-Yellow 234 -Rx 037-038 Assigned DN 42 Yellow-Orange ---- ---- ---- --- 17 Orange-Yellow ---- ---- ---- --- 43 Yellow-Green ---- T ET1 --- 18 Green-Yellow ---- R ET1 --- 44 Yellow-Brown ---- T ET2 --- 19 Brown-Yellow ---- R ET2 ---
264 / Connecting the wiring Modular ICS 6.1 Installer GuideP0603534 02 45 Yellow-Slate ---- ---- ---- --- 20 Slate-Yellow ---- ---- ---- --- 46 Violet-Blue ---- ---- ---- --- 21 Blue-Violet ---- ---- ---- --- 47 Violet-Orange ---- ---- ---- --- 22 Orange-Violet ---- ---- ---- --- 48 Violet-Green ---- ---- ---- --- 23 Green-Violet ---- ---- ---- --- 49 Violet-Brown ---- ---- ---- --- 24 Brown-Violet ---- ---- ---- --- 50 Violet-Slate ---- ---- ---- --- 25 Slate-Violet ---- ---- ---- --- ICS U Interface Cards wiring (profile 1, 3 or 4) Pin Wire color Port (loop) Service Lines (U-NT) TE (U-LT) 26 White-Blue 201 T 001-002 Assigned DN 1 Blue-White 201 R 001-002 Assigned DN 27 White-Orange 202 T 003-004 Assigned DN 2 Orange-White 202 R 003-004 Assigned DN 28 White-Green ---- ---- ---- ---- 3 Green-White ---- ---- ---- ---- 29 White-Brown ---- ---- ---- ---- 4 Brown-White ---- ---- ---- ---- 30 White-Slate 203 T 005-006 Assigned DN 5 Slate-White 203 R 005-006 Assigned DN 31 Red-Blue 204 T 007-008 Assigned DN 6 Blue-Red 204 R 007-008 Assigned DN 32 Red-Orange ---- ---- ---- ---- 7 Orange-Red ---- ---- ---- ---- 33 Red-Green ---- ---- ---- ---- 8 Green-Red ---- ---- ---- ---- 34 Red-Brown 225 T 031-032 Assigned DN 9 Brown-Red 225 R 031-032 Assigned DN 35 Red-Slate 226 T 033-034 Assigned DN 10 Slate-Red 226 R 033-034 Assigned DN 36 Black-Blue ---- ---- ---- ---- 11 Blue-Black ---- ---- ---- ---- ICS ST Interface Cards wiring (profile 2) (Continued) Pin Wire color Port (loop) Service Lines (T-loop) TE (S loop)
Connecting the wiring / 265 P0603534 02Modular ICS 6.1 Installer Guide BRI U wiring is not polarity sensitive. For an explanation about port numbering, see Port numbering on the wiring charts on page 252. 37 Black-Orange ---- ---- ---- ---- 12 Orange-Black ---- ---- ---- ---- 38 Black-Green 227 T 035-036 Assigned DN 13 Green-Black 227 R 035-036 Assigned DN 39 Black-Brown 228 T 037-038 Assigned DN 14 Brown-Black 228 R 037-038 Assigned DN 40 Black-Slate ---- ---- ---- ---- 15 Slate-Black ---- ---- ---- ---- 41 Yellow-Blue ---- ---- ---- ---- 16 Blue-Yellow ---- ---- ---- ---- 42 Yellow-Orange ---- ---- ---- --- 17 Orange-Yellow ---- ---- ---- --- 43 Yellow-Green ---- --- 18 Green-Yellow ---- --- 44 Yellow-Brown ---- --- 19 Brown-Yellow ---- --- 45 Yellow-Slate ---- ---- ---- --- 20 Slate-Yellow ---- ---- ---- --- 46 Violet-Blue ---- ---- ---- --- 21 Blue-Violet ---- ---- ---- --- 47 Violet-Orange ---- ---- ---- --- 22 Orange-Violet ---- ---- ---- --- 48 Violet-Green ---- ---- ---- --- 23 Green-Violet ---- ---- ---- --- 49 Violet-Brown ---- ---- ---- --- 24 Brown-Violet ---- ---- ---- --- 50 Violet-Slate ---- ---- ---- --- 25 Slate-Violet ---- ---- ---- --- ICS U Interface Cards wiring (profile 1, 3 or 4) (Continued) Pin Wire color Port (loop) Service Lines (U-NT) TE (U-LT)
266 / Connecting the wiring Modular ICS 6.1 Installer GuideP0603534 02 ICS U Interface Cards wiring (profile 2) Pin Wire color Port (loop) Service Lines (U-NT) TE (U-LT) 26 White-Blue 201 T 001-002 Assigned DN 1 Blue-White 201 R 001-002 Assigned DN 27 White-Orange 202 T 003-004 Assigned DN 2 Orange-White 202 R 003-004 Assigned DN 28 White-Green ---- ---- ---- ---- 3 Green-White ---- ---- ---- ---- 29 White-Brown ---- ---- ---- ---- 4 Brown-White ---- ---- ---- ---- 30 White-Slate 203 T 005-006 Assigned DN 5 Slate-White 203 R 005-006 Assigned DN 31 Red-Blue 204 T 007-008 Assigned DN 6 Blue-Red 204 R 007-008 Assigned DN 32 Red-Orange ---- ---- ---- ---- 7 Orange-Red ---- ---- ---- ---- 33 Red-Green ---- ---- ---- ---- 8 Green-Red ---- ---- ---- ---- 34 Red-Brown 231 T 031-032 Assigned DN 9 Brown-Red 231 R 031-032 Assigned DN 35 Red-Slate 232 T 033-034 Assigned DN 10 Slate-Red 232 R 033-034 Assigned DN 36 Black-Blue ---- ---- ---- ---- 11 Blue-Black ---- ---- ---- ---- 37 Black-Orange ---- ---- ---- ---- 12 Orange-Black ---- ---- ---- ---- 38 Black-Green 233 T 035-036 Assigned DN 13 Green-Black 233 R 035-036 Assigned DN 39 Black-Brown 234 T 037-038 Assigned DN 14 Brown-Black 234 R 037-038 Assigned DN 40 Black-Slate ---- ---- ---- ---- 15 Slate-Black ---- ---- ---- ---- 41 Yellow-Blue ---- ---- ---- ---- 16 Blue-Yellow ---- ---- ---- ---- 42 Yellow-Orange ---- ---- ---- --- 17 Orange-Yellow ---- ---- ---- --- 43 Yellow-Green ---- --- 18 Green-Yellow ---- --- 44 Yellow-Brown ---- --- 19 Brown-Yellow ---- ---
Connecting the wiring / 267 P0603534 02Modular ICS 6.1 Installer Guide BRI U wiring is not polarity sensitive. Wiring the BRI network interface A network interface provides the connection between the ISDN network and the Modular ICS. If the card in the ICS is configured as a T-loop, the ICS is wired to the network connection using an NT1. See T reference points on page 58 for more information about the NT1. Wiring for T network connection 45 Yellow-Slate ---- ---- ---- --- 20 Slate-Yellow ---- ---- ---- --- 46 Violet-Blue ---- ---- ---- --- 21 Blue-Violet ---- ---- ---- --- 47 Violet-Orange ---- ---- ---- --- 22 Orange-Violet ---- ---- ---- --- 48 Violet-Green ---- ---- ---- --- 23 Green-Violet ---- ---- ---- --- 49 Violet-Brown ---- ---- ---- --- 24 Brown-Violet ---- ---- ---- --- 50 Violet-Slate ---- ---- ---- --- 25 Slate-Violet ---- ---- ---- --- Pin (jack or plug) NT1 connection (for jack)ICS and optional TE connection (plug) 1not usedoptional power source 3 (+) 2not usedoptional power source 3 (-) 3+Rx+Tx 4+Tx+Rx 5-Tx-Rx 6-Rx-Tx 7not usedoptional power sink 2 (-) 8not usedoptional power sink 2 (+) ICS U Interface Cards wiring (profile 2) (Continued) Pin Wire color Port (loop) Service Lines (U-NT) TE (U-LT)
268 / Connecting the wiring Modular ICS 6.1 Installer GuideP0603534 02 The Modular ICS supplies the NT1 functionality to a U-NT loop, allowing a direct connection to the network. The connection may use a plug and jack, or may be directly wired. Wiring for U-NT network interface The BRI-U Card does not use or provide optional power. Some installations may not use a plug and jack for connections between the ICS (NT) and the network. The following illustration shows the pin arrangement for a Bellcore standard ISDN plug and jack. Other pin arrangements are possible. Jack and plug pin numbering Pin (jack or plug)Norstar connection (for plug to network interface jack)Network interface connection (jack) 1not usedoptional battery status indicator (+) 2not usedoptional battery status indicator (-) 3not usedno connection 4RR 5TT 6not usedno connection 7not usedoptional power supply (-) 8not usedoptional power supply (+) 8 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8
Connecting the wiring / 269 P0603534 02Modular ICS 6.1 Installer Guide DTI wiring Connecting the DTI to the T1 or PRI service provider Connecting the DTI to an external CSU Pin Direction Signal 1RxRing (Rx from PSTN) 2RxTip (Rx from PSTN) 3 Rx cable shield (optional) 4TxRing (Tx to PSTN) 5TxTip (Tx to PSTN 6 Tx cable shield (optional) 7, 8 no connection Norstar ICS T1 or PRI service provider Norstar ICS CSU to DTE DA15 connector Norstar CSU DT1 Pin Signal Pin 1Rx Ring (Rx from CSU)11 2 Rx Tip (Rx from CSU) 3 3 no connection 4Tx Ring (Tx from CSU)9 5 Tx Tip (Tx to CSU) 1 6-8 no connectionT1 or PRI service provider 1 15
270 / Connecting the wiring Modular ICS 6.1 Installer GuideP0603534 02 Station Module wiring chart Pin Wire color Port Service Telephones SM 26 White-Blue X01 T 1 1 Blue-White X01 R 1 27 White-Orange X02 T 2 2 Orange-White X02 R 2 28 White-Green X03 T 3 3 Green-White X03 R 3 29 White-Brown X04 T 4 4Brown-White X04 R 4 30 White-Slate X05 T 5 5Slate-White X05 R 5 31 Red-Blue X06 T 6 6 Blue-Red X06 R 6 32 Red-Orange X07 T 7 7 Orange-Red X07 R 7 33 Red-Green X08 T 8 8 Green-Red X08 R 8 34 Red-Brown X09 T 9 9Brown-Red X09 R 9 35 Red-Slate X10 T 10 10 Slate-Red X10 R 10 36 Black-Blue X11 T 11 11 Blue-Black X11 R 11 37 Black-Orange X12 T 12 12 Orange-Black X12 R 12 38 Black-Green X13 T 13 13 Green-Black X13 R 13 39 Black-Brown X14 T 14 14 Brown-Black X14 R 14 40 Black-Slate X15 T 15 15 Slate-Black X15 R 15 41 Yellow-Blue X16 T 16 16 Blue-Yellow X16 R 16 42 Yellow-Orange ---- ---- no connection 17 Orange-Yellow ---- ---- no connection 43 Yellow-Green ---- ---- no connection 18 Green-Yellow ---- ---- no connection 44 Yellow-Brown ---- ---- no connection 19 Brown-Yellow ---- ---- no connection 45 Yellow-Slate ---- ---- no connection 20 Slate-Yellow ---- ---- no connection 46 Violet-Blue ---- ---- no connection