Konica Minolta bizhub C35 User Manual

							[User Settings] 3-14
[Paper Tray Settings] Specify paper tray settings.
[Auto Tray Switch] Settings [ON] / [OFF]
Select whether or not a paper tray loaded with 
paper of the same size is selected automati-
cally when a paper tray that was selected man-
ually becomes empty while printing copies.
[Enable ATS/APS] Specify the paper trays that are selected when 
the paper tray is automatically changed.
[Tray 3] and [Tray 4] do not appear if the 
optional lower feeder units have not 
been installed.
[Tray 1] Settings[ON] / [OFF]
Select whether or not [Tray 1] can be selected 
with the automatic tray-switching feature.
[Tray 2] Settings[ON] / [OFF]
Select whether or not [Tray 2] can be selected 
with the automatic tray-switching feature.
[Tray 3] Settings[ON] / [OFF]
Select whether or not [Tray 3] can be selected 
with the automatic tray-switching feature.
[Tray 4] Settings[ON] / [OFF]
Select whether or not [Tray 4] can be selected 
with the automatic tray-switching feature.
[ACS Level] Settings 0 to 4 (Default: 2)
Adjust the level for detecting whether a docu-
ment is in color or in black and white when the 
[Auto] Color setting is selected.Set to [0] or [1] 
for a tendency toward black and white, or set to 
[3] or [4] for a tendency toward color.
[Scan to E-mail
Default Tab]Settings [Favorites] / [Direct Input] / [Log]
Specify the initial screen when changing to the 
E-mail transmission screen.
[Fax
Default Tab]Settings [Favorites] / [Direct Input] / [Oth-
ers]
Specify the initial screen when changing to the 
fax transmission screen.
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings]3-15 [Copy Settings]
All factory default values are shown in bold. [Scan to Folder
Default Tab]Settings [Favorites] / [Direct Input] / [Log]
Specify the initial screen when changing to the 
folder transmission screen.
Item Description
[Auto Zoom for Combine] Settings[Yes] / [No]
Select whether or not the zoom ratio is auto-
matically adjusted when the [Auto] Paper set-
ting and a Combine setting are selected.
[Default Copy Settings] Settings[Factory Default] / [Current Set-
ting]
Select the default copy settings that are 
selected when the machine is turned on or the 
[Reset] key is pressed.
[Factory Default]: The manufacturer’s default 
settings are used as the default settings.
[Current Setting]: The currently specified set-
tings are used as the default settings.
[Separate Scan Output 
Method]Settings [Batch Print] / [Page Print]
Select whether or not printing begins after all 
document pages have been scanned when the 
document is divided and the batches are sepa-
rately loaded into the ADF or when the original 
glass is being used to scan a document con-
taining multiple pages.
[Batch Print]: Printing begins after all pages of 
the document have been scanned.
[Page Print]: Printing of pages that can be 
printed begins while the document is being 
scanned.
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings] 3-16
[Scan Settings]
All factory default values are shown in bold.
Item Description
[JPEG Compression Level] Settings [High Quality] / [Standard] / [High 
Compression]
Select the compression method for saving an 
image in full color.
[High Quality]: The data size will become large, 
but the image quality will be high.
[Standard]: Both the data size and image qual-
ity will be between those of [High Quality] and 
[High Compression].
[High Compression]: The data size will become 
small, but the image quality will be low.
[Black Compression Level] Settings [MH] / [MMR]
Select this machine’s transmission quality 
when sending data with the TIFF file format 
selected.
[MH]: The data size will become large.
[MMR]: The data size will become small.
[Default Scan Settings] Settings[Factory Default] / [Current Set-
ting]
Select the default scan settings that are 
selected when the machine is turned on or the 
[Reset] key is pressed.
[Factory Default]: The manufacturer’s default 
settings are used as the default settings.
[Current Setting]: The currently specified set-
tings are used as the default settings.
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings]3-17 [Print Settings]
All factory default values are shown in bold.
Item Description
[Paper Settings] Specify settings for the paper and paper trays.
[Paper Tray Settings] Specify settings for the paper trays.
[Default Tray] Settings [Tray 1] / [Tray 2] / [Tray 3] / 
[Tray 4]
Select the paper tray that is given priority.
[Tray 3] and [Tray 4] do not appear if the 
optional lower feeder units have not 
been installed.
[Tray 1]-[Tray 4] Specify the default settings for [Tray 1] through 
[Tray 4].
[Tray 3] and [Tray 4] do not appear if the 
optional lower feeder units have not 
been installed.
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings] 3-18
[Paper Size] Settings [Any] / [Letter] / [Legal] / [Execu-
tive] / [A4] / [A5] / [A6] / [B5 (JIS)] / 
[B6] / [Govt Letter] / [Statement] / 
[Folio] / [SP Folio] / [UK Quarto] / 
[Foolscap] / [Govt Legal] / [16K] / 
[4×6] / [Kai 16] / [Kai 32] / [Env C6] / 
[Env DL] / [Env Monarch] / [Env 
Chou#3] / [Env Chou#4] / [B5 
(ISO)] / [Env #10] / [J Postcard] / [J 
Postcard-D] / [8 1/8×13 1/4] / [8 1/
2×13 1/2] / [Custom Size]
Select the size of paper loaded in the selected 
tray.
The default setting is [Letter] for 120V 
model, and [A4] for other models.
Depending on the setting selected for 
[User Settings] - [Machine Settings] - 
[Measurement Unit Setting], 4 × 6 may 
change to 10 × 15 cm.
With [Tray 2], [Env C6], [Env DL], [Env 
Monarch], [Env Chou#3], [Env Chou#4], 
[B5 (ISO)], [Env #10] do not appear.
With [Tray 3] and [Tray 4], only [Letter], 
[Legal], [Govt Legal], [Executive], [A4] 
and [B5 (JIS)] appear.
[Custom Size] Press [Width] and [Length], and then type in 
the paper size.
These settings can be specified if [Paper 
Size] is set to [Custom].
Settings for [Custom Size] cannot be 
specified for [Tray 3] and [Tray 4].
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings]3-19
[Paper Type] Settings [Any] / [Plain Paper] / [Recycled] / 
[Thick 1] / [Thick 2] / [Label] / [Enve-
lope] / [Postcard] / [Letterhead] / 
[Glossy 1] / [Glossy 2] / [1 Side 
Only] / [Special Paper]
Select the type of paper loaded in the selected 
tray.
[Envelope] appears only with [Tray 1].
With [Tray 3] and [Tray 4], only [Any], 
[Plain Paper], [Recycled], [1 Side Only] 
and [Special Paper] appear.
[Duplex] Settings[OFF] / [Long Edge] / [Short Edge]
Select whether pages are printed 
double-sided.
If [Long Edge] is selected, the pages will be 
printed on both sides of the paper for 
long-edge binding.
If [Short Edge] is selected, the pages will be 
printed on both sides of the paper for 
short-edge binding.
[Copies] Settings 1 to 9999 (Default: 1)
Specify the number of copies to be printed.
[Collate] Settings [ON] / [OFF]
Select whether or not to enable collated (sort) 
printing.
[Auto Tray Switching] Settings[ON] / [OFF]
If [ON] is selected and the specified tray runs 
out of paper during printing, a tray loaded with 
paper of the same size is automatically 
selected so printing can continue.
If [OFF] is selected and the specified tray runs 
out of paper, printing stops.
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings] 3-20
[Fax Settings]
Specify the fax settings. For details on specifying the fax settings, refer to the 
[Facsimile User’s Guide].
[Select Default Start App]
This screen appears when an available application is registered while 
Enhanced Server Authentication is enabled.[Tray Mapping] Specify the Tray Mapping settings.
[Tray Mapping 
Mode]Settings [ON] / [OFF]
Select whether or not the Tray Mapping func-
tion is used.
[Logical Tray 0]-
[Logical Tray 9]Settings [Physical Tray 1] / [Physical Tray 
2] / [Physical Tray 3]
For [Logical Tray 1], the default value is 
[Physical Tray 1].
Select the tray that is used for printing when a 
print job is received from another manufac-
turer’s printer driver.
[Print Reports] Specify settings for printing the various reports.
[Configuration Page] Prints information and status of this machine.
[Statistics Page] Prints the statistics page.
[Font List] Prints the font list.
[PS] Prints the PostScript font list.
[PCL] Prints the PCL font list.
[HDD Directory List] Prints the directory list for the hard disk.
[Counter List Print] Prints the list of counters.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-21
[Admin Settings]
From the Admin Settings screen, various settings are available to be changed 
by the machine administrator. In order to display the Admin Settings screen, 
the user must log on using the administrator password.
Administrator 
RegistrationAdministrator 
Registration
Extension 
No.
E-mail 
Address
Auto Reset 
SettingsEnable
Auto Reset
Priority Mode
Machine 
Settings
Date & Time 
Settings
Admin 
Settings
Date 
(XX.XX.XX)
Sleep Time 
Setting
Time
Daylight 
Saving Time
List/Counter
Report 
Input Tray
Time Zone
Enable
Job Settings 
List
Name
Offset
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings] 3-22
Address 
RegistrationAddress 
BookAddress 
BookFax
E-mail
List Output
Number of 
Addresses
List Output
FTPStart Number
Number of 
Addresses
List Output
WebDAVStart Number
Number of 
Addresses
List Output
Start Number
Number of 
Addresses
Start Number
SMBStart Number
Number of 
Addresses
List Output
Machine 
SettingsDevice Name
Address
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-23
Program Fax
E-mail
FTP
Group Start Number
Number of 
Addresses
List Output
Start Number
Number of 
Addresses
List Output
Start Number
Number of 
Addresses
List Output
Start Number
Number of 
Addresses
List Output
Internet FaxStart Number
Number of 
Addresses
List Output
Downloaded From ManualsPrinter.com Manuals