Konica Minolta bizhub C35 User Manual

							Copy programs 8-4
Copying using stored settings (copy programs)
1In the home screen, press [Copy].
2Place the document on the original glass or load it into the ADF.
For details on positioning the document, refer to “Placing a document 
on the original glass” on page 4-36 and “Loading a document into the 
ADF” on page 4-37.
3Press the [Mode Memory] key.
The copy programs screen appear.
4Select the copy program to be recalled.
5Press [Detail].
The settings screen appears.
6Check the copy settings stored with the selected copy program.
7Press [Close].
8Press [OK].
The initial Copy mode screen appears again.
9Press the [Start (Color)] key or the [Start (B&W)] key.
Downloaded From ManualsPrinter.com Manuals 
						

							9Scanning From a
Computer
Application
Downloaded From ManualsPrinter.com Manuals 
						

							Basic Scanning Operation 9-2
Basic Scanning Operation
Documents can be scanned from a computer connected to this machine via a 
network. Scanning settings can be specified and the scanning operation can 
be performed from TWAIN- or WIA-compatible applications. From the scan-
ner driver, a preview can be displayed and various adjustments, such as the 
size of the scan area, can be specified.
For details on the installation of the scanner driver or network TWAIN 
settings, refer to the Installation Guide on the Documentation CD/
DVD.
1Position the document to be 
scanned.
For details on positioning 
the document, refer to 
“Placing a document on 
the original glass” on 
page 4-36 and “Loading 
a document into the ADF” 
on page 4-37.
2Start the application to be used for scanning.
3Start the scanner driver according to the application settings.
4Specify the necessary scanner driver settings.
5Click the [Scan] button in the scanner driver.
Downloaded From ManualsPrinter.com Manuals 
						

							Windows TWAIN Driver Settings9-3
Windows TWAIN Driver Settings
Mode settings
„[Mode Settings]
Select [Basic Mode] for specifying basic settings, or select [Advanced Mode] 
for specifying detailed settings.
The settings that can be specified differ for each mode.
When [Basic Mode] is selected
The following parameters can be set when [Basic Mode] is selected.
„[Help] icon
Click to display Help information.
„[About] icon
Click to display the software version information.
„[Scan Objective]
Specify the document type.
„[Scan Type]
Specify the scan type.
„[Resolution]
Specify the resolution.
„[Auto Color Adjustment]
Specify the auto color adjustment settings.
„[Auto Deskew]
Specify settings for correcting the skew of the image.
„[Paper source]
Specify the paper source.
When scanning documents from the ADF, select whether to scan only the 
front side or both sides of the document.
„[Original Size]
Specify the original size.
„[Rotation]
Select the orientation of the image to be scanned.
Downloaded From ManualsPrinter.com Manuals 
						

							Windows TWAIN Driver Settings 9-4
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected.)
„[Image size]
Shows the data size of the scan image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[Clear] icon
Click to erase the preview image.
When [Advanced Mode] is selected
The following parameters can be set when [Advanced Mode] is selected.
„[Load]
Specify a saved settings file (dat file) for scanning.
„[Save]
Save the current settings as a settings file (dat file).
„[Default]
Return all settings to their defaults.
„[Help icon]
Click to display the Help.
„[About icon]
Click to display the software version information.
„[Paper source]
Specify the paper source.
With scanning documents from the ADF, select whether to scan only the front 
side or both sides of the document.
„[Original Size]
Specify the original size.
„[Scan Type]
Specify the scan type.
Downloaded From ManualsPrinter.com Manuals 
						

							Windows TWAIN Driver Settings9-5
„[Resolution]
Specify the resolution.
„[Scale]
Specify the enlargement or reduction ratio for the selected area.
If the resolution is set at 1200 × 1200dpi or higher, a setting larger 
than 100% cannot be specified.
„Scanning Mode
Select [Auto] or [Manual]. When [Manual] is selected, a tab appears so that 
detailed settings can be specified, for example, for [Brightness/Contrast], [Fil-
ter], [Curves], [Levels], [Color Balance], and [Hue/Saturation].
The parameters that can be set differ depending on the scanning 
mode that is selected.
The detailed settings that appear differ depending on the setting 
selected for [Scan Type].
If [Auto] is selected as the scanning mode, scanning from the original 
glass is performed after a prescan is performed so that a preview 
image can be checked.
„[Image size]
Shows the data size of the scan image.
„[Rotation]
Select the orientation of the image to be scanned.
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected)
„[Auto Deskew]
Specify settings for correcting the skew of the image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[AutoCrop] icon
Click to automatically detect the scanning position based on the preview 
image.
Downloaded From ManualsPrinter.com Manuals 
						

							Windows TWAIN Driver Settings 9-6
„[Zoom Prescan] icon
Click to rescan the area selected in the preview window and enlarge it to fit 
the window.
„[Mirror] icon
Click to display a mirror image of the preview image.
„[Tone Reversal] icon
Click to reverse the colors of the preview image.
„[Clear] icon
Click to erase the preview image.
„[Preview] window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„[Before (RGB)]/[After]
Move the pointer in the preview window to display the color tones at the 
pointer’s position before and after adjustments.
„[Width]/[Height]
Displays the width and height for the selected area in the selected measure-
ment units.
Downloaded From ManualsPrinter.com Manuals 
						

							Windows WIA Driver Settings9-7
Windows WIA Driver Settings
„[Paper source]
Select the paper source.
„[Color picture]
Select this setting when scanning in color.
„[Grayscale picture]
Select this setting when scanning in grayscale.
„[Black and white picture or text]
Select this setting when scanning in black and white.
„[Custom Settings]
Select this setting when scanning with [Adjust the quality of the scanned pic-
ture] settings applied.
If settings have been specified with [Adjust the quality of the canned 
picture], [Custom Settings] is automatically selected.
„[Adjust the quality of the scanned picture]
Click this message to display the Advanced Properties dialog box. In the 
Advanced Properties dialog box, settings can be specified for [Brightness], 
[Contrast], [Resolution(DPI)], and [Picture type] (select from color, grayscale 
or black and white).
These settings are applied when [Custom Settings] is selected.
„[Page size]
Specify the paper size when [Page source] is set to [Document Feeder].
„Preview window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„[Preview]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[Cancel]
Click to close the WIA driver window.
Downloaded From ManualsPrinter.com Manuals 
						

							Macintosh TWAIN Driver Settings 9-8
Macintosh TWAIN Driver Settings
Mode settings
„[Mode Settings]
Select [Basic Mode] for specifying basic settings, or select [Advanced Mode] 
for specifying detailed settings.
The settings that can be specified differ for each mode.
When [Basic Mode] is selected
The following parameters can be set when [Basic Mode] is selected.
„[Help] icon
Click to display Help information.
„[About] icon
Click to display the software version information.
„[Scan Objective]
Specify the document type.
„[Scan Type]
Specify the scan type.
„[Resolution]
Specify the resolution.
„[Auto Color Adjustment]
Specify the auto color adjustment settings.
„[Auto Deskew]
Specify settings for correcting the skew of the image.
„[Paper source]
Specify the paper source.
When scanning documents from the ADF, select whether to scan only the 
front side or both sides of the document.
„[Original Size]
Specify the original size.
„[Rotation]
Select the orientation of the image to be scanned.
Downloaded From ManualsPrinter.com Manuals 
						

							Macintosh TWAIN Driver Settings9-9
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected.)
„[Image size]
Shows the data size of the scan image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[Clear] icon
Click to erase the preview image.
When [Advanced Mode] is selected
The following parameters can be set when [Advances Mode] is selected.
„[Load]
Specify a saved settings file (dat file) for scanning.
„[Save]
Save the current settings as a settings file (dat file).
„[Default]
Return all settings to their defaults.
„Help icon
Click to display the Help.
„About icon
Click to display the software version information.
„[Paper source]
Specify the paper source.
With scanning documents from the ADF, select whether to scan only the front 
side or both sides of the document.
„[Original Size]
Specify the original size.
„[Scan Type]
Specify the scan type.
Downloaded From ManualsPrinter.com Manuals