Konica Minolta bizhub C35 User Manual

							ID & Print 6-6
Downloaded From ManualsPrinter.com Manuals 
						

							7Performing
Copy mode
operations
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation 7-2
Basic copy operation
The general procedure for making copies is described below.
1Place the document on the origi-
nal glass or load it into the ADF.
For details on positioning the 
document, refer to “Placing a 
document on the original 
glass” on page 4-36 and 
“Loading a document into the 
ADF” on page 4-37.
2In the home screen, press [Copy].
When the [Start (Color)] or [Start (B&W)] key is pressed in the home 
screen, the job can be copied with the defaults.
3Specify the desired copy settings.
For details on specifying document size settings, refer to “[Original 
Size]” on page 7-4.
For details on specifying paper size settings, refer to “[Paper]” on 
page 7-5.
For details on specifying zoom ratio settings, refer to “[Zoom]” on 
page 7-6.
For details on specifying double-sided copy settings, refer to “[Duplex/
Combine]” on page 7-7.
For details on specifying density settings, refer to “[Density]” on 
page 7-8.
For details on specifying document type settings, refer to “[Original 
Downloaded From ManualsPrinter.com Manuals 
						

							Basic copy operation7-3
Type]” on page 7-9.
For details on specifying color settings, refer to “[Color Mode]” on 
page 7-9.
For details on specifying Finishing settings, refer to “[Finishing]” on 
page 7-10.
For details on performing the Proof Copy operation, refer to “[Proof 
Copy]” on page 7-10.
For details on performing the Separate Scan operation, refer to “[Sep-
arate Scan]” on page 7-11.
For details on performing the ID Copy operation, refer to “[ID Copy]” 
on page 7-13.
For details on specifying a binding margin, refer to “[Paper Margin]” on 
page 7-14.
For details on adjusting the image quality, refer to “[Image Quality]” on 
page 7-15.
4Using the keypad, type in the desired number of copies.
If the number of copies was incorrectly entered, press the [C] key, and 
then type in the correct number of copies.
5To make a color copy, press the [Start (Color)] key.
To make a black-and-white copy, press the [Start (B&W)] key.
This machine cannot automatically detect the size of an original docu-
ment that will be scanned. Before scanning the document, specify its 
size. If the size of the original document is not correctly specified, 
some parts of the image may be lost. For details on specifying the size 
of an original document, refer to “[Original Size]” on page 7-4.
When sorting or making double-sided or combined copies using the 
original glass, press [Finish] after all pages of the document have 
been scanned.
A screen showing the scanned document appears after the [Start 
(Color)] key or the [Start (B&W)] key is pressed. Check that the docu-
ment was scanned as desired.
[Number Of Originals]: Number of scanned document pages
[Number Of Sets]: Number of scanned copies/specified number of 
copies
[Printed/TTL Pgs]: Number of copy pages printed/total number of 
pages to be printed (Does not appear during a Separate Scan opera-
tion.)
For details on interrupted printing (Interrupt Mode), refer to “Interrupt-
ing a copy job” on page 8-2.
Downloaded From ManualsPrinter.com Manuals 
						

							[Original Size] 7-4
For details on copying using stored settings, refer to “Copy programs” 
on page 8-3.
A document containing pages of different sizes can be loaded into the 
ADF. For details on copying documents with pages of different sizes, 
refer to “[Original Size]” on page 7-4.
[Original Size]
The document size can be specified.
Documents of mixed page sizes
A document containing pages of different sizes (Letter and Legal) can be 
loaded into the ADF. Each document page will be copied onto paper of the 
same size as the original.
Load all document pages so that they are aligned on the left side of 
the ADF. Item Description
[Standard Size] Select the size of the document.
Select [Letter/Legal] to copy a document containing differ-
ent page sizes.
[Custom Size] Specify the size of the document if it is a non-standard 
size.
Press [X] and [Y], and then type in the document size. [X] 
can be set between 30 mm and 356 mm (1.18 inches and 
14.00 inches); [Y] can be set between 30 mm and 216 
mm (1.18 inches and 8.50 inches).
Downloaded From ManualsPrinter.com Manuals 
						

							[Paper]7-5
[Paper]
The size and type of the paper to be printed on can be selected, and the size 
and type settings for the paper loaded into each paper tray can be changed.
The paper size can be selected automatically according to the document size 
or it can be specified manually.
For details on the paper types and sizes, refer to “Print Media” on 
page 4-2.
When paper is loaded in the bypass tray, the [Paper] screen appears 
while the bypass tray (tray 1) is selected automatically. Item Description
[1]-[4] Manually select the paper tray.
[3] and [4] are available if the optional lower feeder 
units have been installed.
[Auto] The paper is selected automatically according to the 
size of the original document.
[Change Tray Set] Specify the type and size of the paper loaded in the 
selected paper tray.
[Paper Size] Specify the paper size.
[Standard Size] Select the paper size.
[Custom Size] Enter the size of the paper.
[Paper Type] Select the paper type.
Downloaded From ManualsPrinter.com Manuals 
						

							[Zoom] 7-6
[Zoom]
The image size for the document can be enlarged or reduced.
Item Description
[+]/[-] Specify the zoom ratio of the copy (25.0% to 
400.0%).
With documents loaded into the ADF, the zoom 
ratio can be set between 25% and 200%.
[Set Zoom] The various preset zoom ratios and the zoom ratio 
for the [Minimal] setting can be changed.
The zoom ratios can be set between 25.0% and 
200.0%.
Zoom settings Select a preset zoom ratio or a programmed zoom 
ratio.
[Auto]: Select this setting for the most appropriate 
zoom ratio to be automatically selected based on 
the size of the loaded document and the specified 
paper size.
[Full Size]: Select this setting to produce a copy 
that is the same size as the document (100.0%).
[Manual]: Press [+] or [-] to enter a custom zoom 
ratio.
[Minimal]: Select this setting to print a copy of the 
document image so that it is slightly smaller than 
the original document size.
Downloaded From ManualsPrinter.com Manuals 
						

							[Duplex/Combine]7-7
[Duplex/Combine]
Whether the scanned document and the printed copy are printed on just one 
side or both sides can be specified. In addition, document images of multiple 
pages (2 or 4 pages) can be combined and printed on a single page.
Item Description
[Duplex] Select whether simplex (single-sided) or duplex 
(double-sided) copies are to be printed.
[1 > 1]: Select this setting to produce single-sided 
copies from single-sided documents.
[1>2]: Select this setting to produce one dou-
ble-sided copy from two single-sided documents.
[2>1]: Select this setting to produce two sin-
gle-sided copies from one double-sided docu-
ment.
[2 > 2]: Select this setting to produce dou-
ble-sided copies from double-sided documents.
[Combine] Select whether to make combined copies.
[No]: Select this setting to not produce combined 
copies.
[2 in 1]: Select this setting to copy two document 
pages onto one page.
[4 in 1 Horizontal]: Select this setting to copy four 
document pages onto one page. The document 
images will be arranged horizontally.
[4 in 1 Vertical]: Select this setting to copy four 
document pages onto one page. The document 
images will be arranged vertically.
Downloaded From ManualsPrinter.com Manuals 
						

							[Density] 7-8
[Density]
Specify the copy density.[Binding Position] Specify the binding positions for the document 
and the copies.
[Orig. Binding Posi-
tion]Select [Left Bind], [Right Bind], [Top Bind] or 
[Auto] as the binding position for the document.
If the binding position for the document is set to 
[Auto], the binding position is set at the left or at 
the top.
[Output Binding 
Position]Select [Left Bind], [Right Bind], [Top Bind] or 
[Auto] as the binding position for the copies.
If the binding position for the copy is set to [Auto], 
the binding position is set at the left or at the top.
[Original Direction] Select [Top], [Bottom], [Left] or [Right] as the ori-
entation of the document loaded into the ADF or 
placed on the original glass.
Item Description
[+]/[-] Adjust the copy density to one of nine levels.
[Standard] Select this setting to return the copy density to the 
standard setting. Item Description
Downloaded From ManualsPrinter.com Manuals 
						

							[Original Type]7-9
[Original Type]
Select the document quality (text or image documents).
[Color Mode]
Specify the printing color used for copies.
Copies will be printed with the specified Color setting when the [Start (Color)] 
key is pressed.Item Description
[Text] Select this setting when copying documents con-
taining only text.
[Text/Photo] Select this setting when copying documents con-
taining both text and photos.
Black text, color text and shading are automatically 
recognized, and the most appropriate image pro-
cessing is performed.
In addition, processing appropriate for printed 
photo documents will be applied to any photos.
[Photo] Select this setting when copying documents con-
taining printed photos.
Item Description
[Auto] Select this setting to detect whether the scanned 
document is in color or in black and white, then 
automatically print copies in either color or black 
and white.
[Full Color] Select this setting to print the copy in full color, 
regardless of whether the scanned document is in 
color or in black and white.
Downloaded From ManualsPrinter.com Manuals