Konica Minolta bizhub C35 User Manual

							Macintosh TWAIN Driver Settings 9-10
„[Resolution]
Specify the resolution.
„[Scale]
Specify the enlargement or reduction ratio for the selected area.
If the resolution is set at 1200 × 1200dpi or higher, a setting larger 
than 100% cannot be specified.
„[Scanning Mode]
Select [Auto] or [Manual]. When [Manual] is selected, a tab appears so that 
detailed settings can be specified, for example, for [Brightness/Contrast], [Fil-
ter], [Curves], [Levels], [Color Balance], and [Hue/Saturation].
The parameters that can be set differ depending on the scanning 
mode that is selected.
The detailed settings that appear differ depending on the setting 
selected for [Scan Type].
If [Auto] is selected as the scanning mode, scanning from the original 
glass is performed after a prescan is performed so that a preview 
image can be checked.
„[Image size]
Shows the data size of the scan image.
„[Rotation]
Select the orientation of the image to be scanned.
If the [Rotate back side] check box is selected, the back side of the 
image is rotated 180° and scanned. (Applies only if [ADF (2-sided)] is 
selected)
„[Auto Deskew]
Specify settings for correcting the skew of the image.
„[Close]
Click to close the TWAIN driver window.
„[Prescan]
Click to begin scanning a preview image.
„[Scan]
Click to begin scanning.
„[AutoCrop] icon
Click to automatically detect the scanning position based on the preview 
image.
Downloaded From ManualsPrinter.com Manuals 
						

							Macintosh TWAIN Driver Settings9-11
„[Zoom Prescan] icon
Click to rescan the area selected in the preview window and enlarge it to fit 
the window.
„[Mirror] icon
Click to display a mirror image of the preview image.
„[Tone Reversal] icon
Click to reverse the colors of the preview image.
„[Clear] icon
Click to erase the preview image.
„Preview window
Displays a preview image. Drag the rectangle over the image to select an 
area.
„[Before (RGB)]/[After]
Move the pointer in the preview window to display the color tones at the 
pointer’s position before and after adjustments.
„[Width]/[Height]
Displays the width and height for the selected area in the selected measure-
ment units.
Downloaded From ManualsPrinter.com Manuals 
						

							Using a Web Service 9-12
Using a Web Service
The scan command can be sent from a computer (Windows 7/Vista/Server 
2008) on the network or this machine can scan using a specified operation, 
and the scan data can be sent to a computer. The settings that must be spec-
ified in advance on the computer are described below.
Settings required to use a Web Service
The following settings are required in order to use a Web Service.
„Install this machine on the computer.
„Specify settings on the machine for using a Web Service.
Specify the Web Service settings on the machine from the Admin Set-
tings screen. For details, refer to the [Reference Guide].
Installing this machine on the computer
Confirmation before installation
Before installation, make sure that “Network Discovery” (Network and Shar-
ing Center in Control Panel) is enabled.
Installation procedure
1In the Start button menu, click “Network”.
The devices connected to the network appear.
2Right-click the scanner icon for this machine, and then click “Install”.
– Depending on the settings specified on the computer, a UAC (User 
Account Control) message may appear. Check the information 
described in the message, and then continue with the procedure.
– If both scanning and printing using a Web Service have been enabled 
on this machine, this machine appears as a printer icon.
– The driver software is automatically installed. After a confirmation 
message appears, click [Close].
3From the control panel of the machine, select [Scan to Folder] - [Direct 
Input] - [Web Service Settings], and then check that a destination 
appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Using a Web Service9-13 Specifying the scan command from a computer (Web 
Service)
A computer can send the scan command to this machine, then receive the 
scan data.
As an example, the procedure for scanning from the Windows Photo Gallery 
is described below.
The scan command can also be sent from this machine, where the 
data will be saved. For details, refer to “With [Web Service Settings]” 
on page 10-32.
Specifying the scan command from a computer
1Start up the application used for scanning.
2In the “File” menu, click “From Scanner or Camera”.
3From the “Select Device” list, select this machine, and then click [OK].
The New Scan window appears.
4Position the document on this machine.
– Specify the scan settings, and then click [Scan].
Scanning begins, and the scan data is added to the list of image files.
Downloaded From ManualsPrinter.com Manuals 
						

							Using a Web Service 9-14
Downloaded From ManualsPrinter.com Manuals 
						

							10
1Scanning with
the machine
Downloaded From ManualsPrinter.com Manuals 
						

							Initial settings 10-2
Initial settings
This machine is equipped with scanning functions for saving data on this 
machine’s hard disk or on a USB memory device, and with network scanning 
functions for sending scanned image data through the network with E-mail 
transmissions, FTP transmissions, SMB transmissions, WebDAV transmis-
sions and Web Service transmissions.
„In order to perform an FTP transmission, a connection to the network is 
required, and parameters must be specified on the [TCP/IP] and [FTP] 
screens.
„In order to perform an SMB transmission, a connection to the network is 
required, and parameters must be specified on the [TCP/IP] and [SMB] 
screens.
„In order to perform a WebDAV transmission, a connection to the network 
is required, and parameters must be specified on the [TCP/IP] and [Web-
DAV] screens.
„In order to perform a Web Service transmission, a connection to the net-
work is required, and parameters must be specified on the [TCP/IP] and 
[WSD Print] screens.
„In order to perform an E-mail transmission, a connection to the network is 
required, parameters must be specified on the [TCP/IP] and [SMTP] 
screens, and an E-mail address must be registered for [Administrator 
Registration].
„For details on specifying network settings, refer to the [Reference Guide].
Useful functions
„The destinations (recipients) for scan data can be registered as address 
book destinations or group destinations.
„The destination and scan settings can be registered together as a single 
program. This is convenient for frequently scanning documents and send-
ing data under the same conditions.
Downloaded From ManualsPrinter.com Manuals 
						

							Performing Scan to E-mail mode operations10-3
Performing Scan to E-mail mode operations
Basic Scan to E-mail operation
The basic procedure for the Scan to E-mail operation, which sends scan data 
with an E-mail transmission, is described below.
1Press [Scan to E-mail] to display the initial Scan to E-mail mode screen.
2Place the document in the ADF or on the original glass.
– For details on loading the original document, refer to “Loading a Docu-
ment” on page 4-36.
If the document contains more pages than can be loaded into the ADF, 
set [Settings] - [Original Settings] - [Separate Scan] to [ON] so that the 
document can be divided and scanned separately. For details, refer to 
“[Original Settings] - [Separate Scan]” on page 10-5.
To scan multiple document pages using the original glass and send 
them as combined scan data, set [Settings] - [Original Settings] - [Sep-
arate Scan] to [ON]. For details on [Separate Scan], refer to “[Original 
Settings] - [Separate Scan]” on page 10-5.
3Specify the destination.
– For details on specifying destinations, refer to “Specifying destina-
tions” on page 10-14.
– In the initial Scan to E-mail mode screen, press [Mode Check] to 
check or change the specified destinations.
4If necessary, specify settings for other parameters in the [Settings] screen.
– For details on the [Simplex/Duplex], [Original Size], [Original Settings], 
[Color Mode] and [Original Type] parameters available from the [Set-
tings] screen, refer to “Specifying document settings” on page 10-4.
– For details on the [Background/Density], [Resolution] and [File Set-
tings] parameters available from the [Settings] screen, refer to “Speci-
fying scan settings” on page 10-8.
– For details on the [Communication] parameters available from the 
[Settings] screen, refer to “Specifying communication settings” on 
page 10-12.
Downloaded From ManualsPrinter.com Manuals 
						

							Performing Scan to E-mail mode operations 10-4
5Press the [Start] key.
– Press the [Start (Color)] key to scan in color, or press the [Start (B&W)] 
key to scan in black and white.
This machine cannot automatically detect the size of an original docu-
ment that will be scanned. Before scanning the document, specify its 
size. If the size of the original document is not correctly specified, 
some parts of the image may be lost. For details on specifying the size 
of an original document, refer to “[Original Size]” on page 10-5.
If the memory becomes full while the document is being scanned, 
scanning cannot continue. To send the document pages that have 
already been scanned, press the [Start] key. To stop the transmission, 
press the [Stop] key.
Specifying document settings
The [Simplex/Duplex], [Original Size], [Original Settings], [Color Mode] and 
[Original Type] parameters available from the [Settings] screen can be used 
to specify document settings.
[Simplex/Duplex]
Select whether double-sided documents are to be scanned when the ADF is 
used.
Item Description
[1-sided] Select this setting when scanning a single-sided 
document.
[2-sided] Select this setting when scanning a double-
sided document.
[Cover + 2-sided] Select this setting when scanning a double-
sided document with a cover page. Only the 
front side of the cover page will be scanned, and 
then both the front and back sides of the remain-
ing pages will be scanned.
Downloaded From ManualsPrinter.com Manuals 
						

							Performing Scan to E-mail mode operations10-5
[Original Size]
Specify the size of the document that is to be sent.
[Original Settings] - [Separate Scan]
A document can be divided and scanned separately.
The scan operation can be divided into several sessions, for example, when 
the document contains more pages than can be loaded into the ADF or when 
the original glass is being used to scan a document containing multiple 
pages, and then all scanned pages can be sent as a single document.
1Place the document in the ADF or on the original glass.
2Press [Scan to E-mail] to display the initial Scan to E-mail mode screen.
3With [Original Settings] in the [Settings] screen, set [Separate Scan] to 
[ON].
4Press the [Start] key.
The document is scanned.
5Place the next document page on the original glass, and then press the 
[Start] key.
– Repeat this step until all document pages have been scanned.
6After all pages of the document have been scanned, press [Finish]. Item Description
[Standard Size] Select the size of the document.
Select [Letter/Legal] to scan a document con-
taining different page sizes.
[Custom Size] Specify the size of the document if it is a 
non-standard size.
Press [X] and [Y], and then type in the document 
size. [X] can be set between 30 mm and 356 
mm (1.18 inches and 14.00 inches); [Y] can be 
set between 30 mm and 216 mm (1.18 inches 
and 8.50 inches).
Downloaded From ManualsPrinter.com Manuals