Konica Minolta bizhub C35 User Manual

							[Admin Settings] 3-44
[Authentication Setting]
All factory default values are shown in bold. [Group] Specify settings for printing the list of group 
destinations.
[Start Number]: Specify the starting group des-
tination number.
[Number of Addresses]: Specify the number of 
group destinations.
[List Output]: Prints the list of group destina-
tions.
[Program] Specify settings for printing the list of program 
destinations.
[Fax]/[E-mail]/[FTP]/
[WebDAV]/[SMB]/
[Internet Fax]/
[Address Book]/
[Group Address][Start Number]: Specify the starting program 
destination number.
[Number of Addresses]: Specify the number of 
program destinations.
[List Output]: Prints the list of program destina-
tions.
Item Description
[User List Display Setting] Settings [ON] / [OFF]
Select whether or not to display a user list.
[Logout Confirmation 
Display]Settings [ON] / [OFF]
Select whether or not a logoff confirmation 
message appears after the [Access] key is 
pressed.
[Card Authentication] Displayed only when the authentication device 
is connected, and used to register IC card 
information for the user.
For details, refer to “Authentication device (IC 
card type)” on page 15-1.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-45 [Ethernet]
All factory default values are shown in bold.
Item Description
[TCP/IP] Specify network settings for the machine.
[Enable] Settings[ON] / [OFF]
Select the setting for connecting to this 
machine through a network.
If [OFF] is selected, the TCP/IP 
parameters do not appear.
[IP Address] Settings [0.0.0.0]
Specify the IP address used by this machine on 
the network.
[Subnet Mask] Settings [0.0.0.0]
Specify the subnet mask.
[Gateway] Settings [0.0.0.0]
Specify the gateway address.
[DHCP] Settings[ON] / [OFF]
If there is a DHCP server on the network, spec-
ify whether the IP address and other network 
information are automatically assigned by the 
DHCP server.
[BOOTP] Settings [ON] / [OFF]
If there is a BOOTP server on the network, 
specify whether the IP address and other net-
work information are automatically assigned by 
the BOOTP server.
[ARP/PING] Settings [ON] / [OFF]
Select whether or not the ARP/PING command 
is used when the IP address is assigned.
[HTTP] Settings[Enable] / [Disable]
Select whether or not to enable HTTP.
[FTP] Settings[Enable] / [Disable]
Select whether or not to enable the FTP server.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings] 3-46
[Telnet] Settings[Enable] / [Disable]
Select whether or not to enable Telnet trans-
missions.
[Bonjour] Settings[Enable] / [Disable]
Select whether or not to enable Bonjour.
[Dynamic DNS] Settings [Enable] / [Disable]
Select whether or not to enable Dynamic DNS.
[IPP] Settings[Enable] / [Disable]
Select whether or not to enable IPP.
[RAW Port] Specify the RAW port settings.
[Enable] Settings[Yes] / [No]
Select whether or not to enable the RAW port.
[Bidirectional] Settings [ON] / [OFF]
Select whether or not to enable RAW port bidi-
rectional communication.
[SLP] Settings[Enable] / [Disable]
Select whether or not to enable SLP.
[SMTP] Settings[Enable] / [Disable]
Select whether or not to enable E-mail trans-
mission operations for this machine.
[SNMP] Settings[Enable] / [Disable]
Select whether or not to enable SNMP.
[WSD Print] Settings[Enable] / [Disable]
Select whether or not to enable WSD printing.
[IPSec] Settings [Enable] / [Disable]
Select whether or not to enable IPsec.
[IP Address Filter] Specify IP address filtering settings.
[Permit Access] Settings [Enable] / [Disable]
Specify access permissions for IP address fil-
tering.
[Deny Access] Settings [Enable] / [Disable]
Specify access blocking for IP address filtering.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-47
[IPv6] Specify IPv6 settings.
[Enable] Settings[ON] / [OFF]
Select whether or not to enable IPv6.
[Auto Setting] Settings[Enable] / [Disable]
Select whether or not to enable the IPv6 auto 
setting.
[Link Local] Displays the link-local address.
[Global Address] Displays the global address.
[Gateway Address] Displays the gateway address.
[Netware] Settings [Enable] / [Disable]
Select whether or not to enable NetWare.
[AppleTalk] Settings[Enable] / [Disable]
Select whether or not to enable AppleTalk.
[Network Speed] Settings[Auto] / [10 Mbps Full Duplex] / [10 
Mbps Half Duplex] / [100 Mbps Full 
Duplex] / [100 Mbps Half Duplex] / 
[1 Gbps Full Duplex]
Specifies the transmission speed for the net-
work and the transmission method for bidirec-
tional transmission.
[IEEE802.1X] Settings [Enable] / [Disable]
Select whether or not to enable IEEE802.1X.
[Binary Division] Settings [ON] / [OFF]
Select whether or not transmission data is 
divided.
[S/MIME Comm.Setting] Specify S/MIME communication settings.
[S/MIME Enabled] Settings [Enable] / [Disable]
Select whether or not to enable S/MIME.
[Digital Signature] Settings [Always add signature] / [Do not 
add signature] / [Select when 
sending]
Select the setting for digital signatures.
[Encryption Method] Settings [RC2-40] / [RC2-64] / [RC2-128] / 
[DES] / [3DES] / [AES-128] / 
[AES-192] / [AES-256]
Select the encryption method for the body of 
E-mail messages.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings] 3-48
[External Memory Print]
[Job Timeout]
[Copy Settings]
All factory default values are shown in bold. [Auto. Obtain Certifi-
cates]Settings [Yes] / [No]
Select whether or not to automatically obtain 
certificates.
[Print S/MIME Informa-
tion]Settings [Yes] / [No]
Select whether or not to print S/MIME informa-
tion.
Description
Settings[Enable] / [Disable]
Select whether or not to enable the External Memory Print 
function.
Description
Settings 5 to 300(Default:15)
Specify the length of time until a job timeout occurs.
Item Description
[Specify Tray When APS 
OFF]Settings[Tray Before APS ON] / [Default 
Tray]
Select which paper tray is selected when the 
automatic tray-switching feature (APS) is dis-
abled.
[Paper Priority] Settings [Tray 1] / [Tray 2] / [Tray 3] / [Tray 
4]
Specify the paper tray that is normally used.
[Tray3] and [Tray4] do not appear if the 
optional lower feeder units have not 
been installed.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-49 [Print Settings]
All factory default values are shown in bold.
Item Description
[Startup Page Setting] Settings [ON] / [OFF]
Select whether or not a startup page is printed 
when the machine is turned on.
[Auto Continue] Settings [ON] / [OFF]
Select whether or not printing continues when 
a size error occurs during printing.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings] 3-50
[Paper] Specify settings for the paper used for printing.
[Default Paper] Specify settings for the paper that is normally 
used.
[Paper Size] Settings[Letter] / [Legal] / [Executive] / [A4] 
/ [A5] / [A6] / [B5 (JIS)] / [B6] / [Govt 
Letter] / [Statement] / [Folio] / [SP 
Folio] / [UK Quarto] / [Foolscap] / 
[Govt Legal] / [16K] / [4×6] / [Kai 16] 
/ [Kai 32] / [Env C6] / [Env DL] / 
[Env Monarch] / [Env Chou#3] / 
[Env Chou#4] / [B5 (ISO)] / 
[Env#10] / [J Postcard] / [J Post-
card-D] / [8 1/8×13 1/4] / [8 1/2×13 
1/2] / [Custom Size]
Select the paper size.
The default setting is [Letter] for USA 
and Canada, and [A4] for other 
countries.
Depending on the setting selected for 
[User Settings] - [Machine Settings] - 
[Measurement Unit Setting], 4 × 6 may 
change to 10 × 15 cm.
[Custom Size] Press [Width] and [Length], and then type in 
the paper size.
Setting range for Width
For inches: 3.63 to 8.50 inches
For millimeters: 92 to 216 mm
Setting range for Length
For inches: 5.83 to 14.00 inches
For millimeters: 148 to 256 mm
These settings can be specified if [Paper 
Size] is set to [Custom Size].
[Paper Type] Settings[Plain Paper] / [Recycled] / [Thick 
1] / [Thick 2] / [Label] / [Envelope] / 
[Postcard] / [Letterhead] / [Glossy 
1] / [Glossy 2] / [1 Side Only] / [Spe-
cial Paper]
Select the paper type.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-51
[Measurement Unit Set-
ting]Settings[Inch] / [mm]
Select the measurement units.
[Hold Job Timeout] Settings[Disable] / [1 Hour] / [4 Hours] / [1 
Day] / [1 Week]
Specify the length of time until print jobs saved 
on the hard disk are deleted. If [Disable] is 
selected, print jobs are not deleted at a specific 
time.
[Quality Settings] Specify settings for the print quality.
[Color Mode] Settings[Color Mode] / [Gray Scale]
[Color Mode]: The pages are printed in full 
color.
[Gray Scale]: The pages are printed in black 
and white.
[Brightness] Settings -15 to 15% (Default: 0%)
The brightness of the printed image can be 
adjusted.
[Halftone] Select how halftones in images, text and 
graphics are reproduced.
[Image Printing] Settings [Line Art] / [Detail] / [Smooth]
Select how halftones in images are repro-
duced.
[Line Art]: Halftones are reproduced with high 
precision.
[Detail]: Halftones are reproduced with detail.
[Smooth]: Halftones are reproduced with 
smoothness.
[Text Printing] Settings[Line Art] / [Detail] / [Smooth]
Select how halftones in text are reproduced.
[Line Art]: Halftones are reproduced with high 
precision.
[Detail]: Halftones are reproduced with detail.
[Smooth]: Halftones are reproduced with 
smoothness.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings] 3-52
[Graphics Printing] Settings [Line Art] / [Detail] / [Smooth]
Select how halftones in graphics are repro-
duced.
[Line Art]: Halftones are reproduced with high 
precision.
[Detail]: Halftones are reproduced with detail.
[Smooth]: Halftones are reproduced with 
smoothness.
[Edge Enhancement] Select how edges in images, text and graphics 
are emphasized.
[Image Printing] Settings [ON] / [OFF]
Select whether image edges are emphasized.
[ON]: The edges are emphasized.
[OFF]: The edges are not emphasized.
[Text Printing] Settings[ON] / [OFF]
Select whether text edges are emphasized.
[ON]: The edges are emphasized.
[OFF]: The edges are not emphasized.
[Graphics Printing] Settings[ON] / [OFF]
Select whether graphics edges are empha-
sized.
[ON]: The edges are emphasized.
[OFF]: The edges are not emphasized.
[Edge Strength] Settings [OFF] / [Low] / [Middle] / [High]
Select the desired amount that edges are 
emphasized.
[OFF]: The edges are not emphasized.
[Low]: The edges are slightly emphasized.
[Middle]: The edges are emphasized by an 
average amount.
[High]: The edges are highly emphasized.
Downloaded From ManualsPrinter.com Manuals 
						

							[Admin Settings]3-53
[Economy Print] Settings [ON] / [OFF]
Select whether to print graphics with a reduced 
density by reducing the amount of toner that is 
used.
[ON]: The amount of toner used is reduced 
when printing.
[OFF]: The amount of toner used is not 
reduced when printing.
[PCL Settings] Specify settings for PCL printing.
[Contrast] Settings -15 to 15%(Default: 0%)
The contrast of the image can be adjusted.
[Image Printing] Specify settings for RGB image data.
[RGB Source] Settings [Device Color] / [sRGB]
Select the color space for RGB image data.
If [Device Color] is selected, no color space is 
specified.
RGB source profiles downloaded with Down-
load Manager or PageScope Web Connection 
are available as RGB Source.
[RGB Intent] Settings [Vivid] / [Photographic]
Select the characteristic applied when convert-
ing RGB image data to CMYK data.
[Vivid]: A vivid output is produced.
[Photographic]: A brighter output is produced.
[RGB Gray] Settings [Bk=CMYK Gray=CMYK] / [Bk=K 
Gray=K] / [Bk=K Gray=CMYK]
Select how black and grays are reproduced in 
RGB image data.
[Bk=CMYK Gray=CMYK]: Black is reproduced 
using the CMYK colors.
[Bk=K Gray=K]: Black and gray are reproduced 
using black only.
[Bk=K Gray=CMYK]: Black is reproduced using 
only black.
Downloaded From ManualsPrinter.com Manuals