Konica Minolta bizhub C35 User Manual
Have a look at the manual Konica Minolta bizhub C35 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 61 Konica manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 359
Working Table WT-P01 14-6
7Reconnect the power cord, and
turn on the machine.
8Declare Paper Source Unit 3/4 in the Windows printer driver [Properties]/
[Configure] tab.
Working Table WT-P01
Provides an area to temporarily place an original or other materials. This is
also used when the authentication device is installed.
Kit Contents
a—Working table
b—Mounting plate
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/2790/37230/w64_Konica_Minolta_bizhub_C35-358.png "Page 359
Working Table WT-P01 14-6
7Reconnect the power cord, and
turn on the machine.
8Declare Paper Source Unit 3/4 in the Windows printer driver [Properties]/
[Configure] tab.
Working Table WT-P01
Provides an area to temporarily place an original or other materials. This is
also used when the authentication device is installed.
Kit Contents
a—Working table
b—Mounting plate
Downloaded From ManualsPrinter.com Manuals")
![Page 366
Configuring this machine15-3
2In [User Authentication], select [Device].
3Click [Apply] to save the settings.
4In the [General Settings] page of [Authentication Device Settings], select
[Authentication Type] and [IC Card Type].
–In [IC Card Type], specify the required IC card type.
–For [Authentication Type], specify how to log in to this machine after
registration.
[Card Authentication]: Allows the user to log in by simply placing the
IC card.
[Card Authentication + Password]: Allows the user to log...](http://img.usermanuals.tech/thumb/2790/37230/w64_Konica_Minolta_bizhub_C35-365.png "Page 366
Configuring this machine15-3
2In [User Authentication], select [Device].
3Click [Apply] to save the settings.
4In the [General Settings] page of [Authentication Device Settings], select
[Authentication Type] and [IC Card Type].
–In [IC Card Type], specify the required IC card type.
–For [Authentication Type], specify how to log in to this machine after
registration.
[Card Authentication]: Allows the user to log in by simply placing the
IC card.
[Card Authentication + Password]: Allows the user to log...")
Working Table WT-P01 14-8 2Tighten the screws (c) tempo- rarily. 3Install the working table. c 1 a Downloaded From ManualsPrinter.com Manuals
Working Table WT-P0114-9 4Using a coin, tighten the screws (c). 5Using a coin, tighten the screws (d). d Downloaded From ManualsPrinter.com Manuals
Working Table WT-P01 14-10 Downloaded From ManualsPrinter.com Manuals
15 Authentication device (IC card type) Downloaded From ManualsPrinter.com Manuals
Using authentication device (IC card type) 15-2 Using authentication device (IC card type) The authentication device (IC card type) is an IC card authentication system that reads the IC card to perform personal authentication. Using this system, you can perform authentication with an IC card to log in to this machine or execute a print job when User Authentication is enabled in this machine. To use the authentication device, first register the card ID of the user in this machine. The registered user, who is authenticated with the card ID, can log in to this machine or execute a print job. This section explains how to config- ure the required settings in this machine, register users, and log in to this machine with authentication. Do not disconnect the USB cable while using the authentication device. Doing so may cause the system to become unstable. Do not leave the IC card within 40 mm of the card reader. Configuring this machine User authentication settings must be configured with MFP authentication on this machine. Configure the user authentication settings using PageScope Web Connec- tion. For details on using PageScope Web Connection, refer to Reference Guide. 1In Administrator mode of PageScope Web Connection, click [Security] tab - [Authentication] - [General Settings]. Downloaded From ManualsPrinter.com Manuals
Configuring this machine15-3 2In [User Authentication], select [Device]. 3Click [Apply] to save the settings. 4In the [General Settings] page of [Authentication Device Settings], select [Authentication Type] and [IC Card Type]. –In [IC Card Type], specify the required IC card type. –For [Authentication Type], specify how to log in to this machine after registration. [Card Authentication]: Allows the user to log in by simply placing the IC card. [Card Authentication + Password]: Allows the user to log in by placing the IC card and entering the password. –For details on how to log in to this machine, refer to “Logging in to this machine” on page 15-15. Downloaded From ManualsPrinter.com Manuals
Registering a user 15-4 5Click [Apply] to save the settings –If the card function setting page appears, specify the necessary set- tings. 6Exit PageScope Web Connection. Then, proceed with the user registration. Registering a user Register a user using Data Administrator. The following two methods can be used. „Connect the authentication device to your computer, and use Data Admin- istrator to register the target user and card at a time. „Connect the authentication device to this machine, and associate the user, who has been registered using Data Administrator, with an IC card. Registering a user using Data Administrator To use Data Administrator, configure this machine, and set up Data Adminis- trator. For setup, install the IC Card Driver (USB-Driver) of the authentication device, and then install Data Administrator IC Card Plugin. Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operating environment and installation pro- cedure, refer to the Data Administrator Users Guide. Checking the version of the installed Data Administrator 1From the [Help] menu of Data Administrator, select [Version Information]. This software cannot be used if the version is 3.x. Install 4.x. If Data Administrator V3.x is installed, it is removed when V4.x is installed. 2Click [Plug-in version]. Downloaded From ManualsPrinter.com Manuals
Registering a user15-5 3In [Plug-in information list], confirm the plugin version of Data Administra- tor. –This software is available if the plugin version is 4.x. Setup 1Turn the Main Power Switch of this machine off, and disconnect the authentication device from this machine. 2Install IC Card Driver (USB-Driver). Connect the authentication device to the USB port of your computer. The [Found New Hardware] dialog box appears. Downloaded From ManualsPrinter.com Manuals
Registering a user 15-6 3Select [Locate and install driver software (recommended)]. 4Insert the application CD-ROM provided with the authentication device into the CD-ROM drive of the computer. 5Click the [Browse my computer for driver software (advanced)]. Downloaded From ManualsPrinter.com Manuals
Registering a user15-7 6Check that the drivers search location is the application CD-ROM, and then click [Next]. –When the drivers search location is not the application CD-ROM, click [Browse]. Select the IC Card Driver (USB-Driver) folder in the CD-ROM, and click [OK]. Downloaded From ManualsPrinter.com Manuals