Konica Minolta bizhub C35 User Manual

							[Accessibility] 3-4
1Press the [Utility/Counter] key.
2Press [Accessibility].
All factory default values are shown in bold.
Item Description
[Key Repeat /Interval] The length of time until the value begins to change 
after a button is held down and the length of time for 
the value to change can be specified.
[Time to Start] Settings0.1 to 3.0 seconds (Default:0.8)
Specify the length of time until a value begins to 
change after a button is held down.
[Key Interval] Settings0.1 to 3.0 seconds (Default:0.3)
Specify the length of time for the value to change.
[Sound Settings] Settings can be specified for the various sounds pro-
duced with key operations.
[Set all] Settings Enable: [ON] / [OFF] 
Volume: [Low] / [Medium] / [High] 
To specify that sounds be produced, press [Enable], 
and then press [ON]. To adjust the volume, press 
[Volume], and then press [Low], [Medium] or [High]. 
To specify that sounds not be produced, press 
[Enable], and then press [OFF].
[Operation Confirma-
tion]Select if confirmation sounds are to be produced with 
key operations.
[Input Confirmation 
Sound]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when keys are 
pressed to enter data.
[Invalid Input Sound] Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when keys are 
pressed to enter invalid data.
[Basic Sound] Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when the 
default setting is selected while scrolling through the 
settings.
Downloaded From ManualsPrinter.com Manuals 
						

							[Accessibility]3-5
[Successful Completion] Select if sounds are to be produced when an opera-
tion or communication is completed successfully.
[Operation Comple-
tion]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when an opera-
tion is completed successfully.
[Transmission Com-
pletion]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when a commu-
nication is completed successfully.
[Completion Prepara-
tion]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select if sounds are to be produced when machine 
preparations are finished.
[Caution Sound] Select if sounds are to be produced when cautions 
occur.
[Low Caution Sound 
(Level 1)]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when a mes-
sage appears in the touch panel, warning that it is 
almost time to replace consumables or a replaceable 
part.
[Low Caution Sound 
(Level 2)]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when the user 
performs an incorrect operation.
[Low Caution Sound 
(Level 3)]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when an error 
occurs that can be corrected by the user by referring 
to the message that appeared or the User’s Guide.
[Severe Caution 
Sound]Settings Enable : [ON] / [OFF]
Volume : [Low] / [Medium] / [High]
Select whether sounds are produced when an error 
occurs that cannot be corrected by the user or 
requires a service representative.
Downloaded From ManualsPrinter.com Manuals 
						

							[Accessibility] 3-6
[Touch Panel Adujstment] If the touch panel buttons do not respond correctly, 
the position of buttons in the touch panel may not be 
correctly aligned with the position of the actual touch 
sensor and may need to be adjusted.
„Press the four check points ([+]) in the touch 
panel adjustment screen, making sure that a 
sound is produced with each, and then press 
the [Start] key.
„The check points ([+]) can be pressed in any 
order.
„To reset the adjustment, press the [C] key, and 
then press the four check points ([+]) again.
„To cancel the touch panel adjustment, press the 
[Stop] key.
„If the touch panel cannot be adjusted, contact 
the service representative.
[Message Display Time] Settings[3 sec.] / [5 sec.]
Specify the length of time for displaying warning mes-
sages, which appear, for example, when an incorrect 
operation is performed.
[LCD Brightness] Settings -3 to 3 (Default: 0)
Adjust the contrast of the touch panel.
Downloaded From ManualsPrinter.com Manuals 
						

							[Meter Count]3-7
[Meter Count]
From the [Meter Count] screen, the page count for each function and the total 
page count can be viewed.
1Press the [Utility/Counter] key.
2Press [Meter Count].
3Press [ ], [ ], [ ] or [ ] to display the desired information.
Item Description
[Total] Displays the total page count for each opera-
tion mode.
[Copy] Displays the page count for copy operations.
[Print] Displays the page count for print operations.
[Scan] Displays the page count for scan operations.
[Fax] Displays the page count for fax operations.
Scan
To t a l
Print
Copy
Meter Count
Fax
Downloaded From ManualsPrinter.com Manuals 
						

							[Address Registration] 3-8
[Address Registration]
From the [Address Registration] screen, E-mail and fax destinations can be 
registered and viewed.
1Press the [Utility/Counter] key.
2Press [Address Registration].
[Address Registration] does not appear if only account track settings 
have been specified and no user is logged on with an account.
Item Description
[E-mail] Destinations for E-mail transmissions can be regis-
tered and viewed.
For details on registering, refer to “Registering an 
address book destination” on page 10-35.
[Mode Check] Press to view the details for the selected destina-
tion.
[New] Press to register a new destination.
Specify settings for [No.], [Name], [E-mail], [Favor-
ites] and [Index].
Fax
Address 
RegistrationE-mailMode Check
New
Mode Check
New
SMBMode Check
New
Downloaded From ManualsPrinter.com Manuals 
						

							[Address Registration]3-9
[Fax] Fax destinations can be registered and viewed.
For details on registering, refer to the [Facsimile 
User’s Guide].
[Mode Check] Press to view the details for the selected destina-
tion.
[New] Press to register a new destination.
Specify settings for [No.], [Name], [Fax number], 
[Favorites], [Index] and [Line Settings].
[SMB] Destinations for SMB transmissions can be regis-
tered and viewed.
For details on registering, refer to “Registering an 
address book destination” on page 10-35.
[Mode Check] Press to view the details for the selected destina-
tion.
[New] Press to register a new destination.
Specify settings for [No.], [Name], [Connection] 
([Host Name], [File Path], [User ID], [Password]), 
[Favorites] and [Index]. Item Description
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings] 3-10
[User Settings]
From the [User Settings] screen, various settings are available to be changed 
by the user.
Machine 
Settings
Paper Tray 
Settings
Copy 
Settings
User SettingsLanguage
Auto Tray 
Switch
Tray 1
Measurement 
Unit Setting
Enable ATS/
APS
ACS Level
Tray 2
Tray 3
Default 
Copy 
Settings
Auto Zoom 
for Combine
Separate 
Scan Output 
Method
Tray 4
Scan to 
E-mail
Default Tab
Fax
Default Tab
Scan to 
Folder
Default Tab
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings]3-11
Scan 
Settings
Default 
Scan 
Settings
Print 
Settings
JPEG 
Compression 
Level
Paper Tray 
Settings
Paper Size
Black 
Compression 
Level
Default Tray
Custom Size
Paper 
Settings
Tray 1
Tray 2
Tray 3Duplex
Copies
Collate
Auto Tray 
Switching
Paper Type
Paper Size
Custom Size
Paper Type
Paper Size
Paper Type
Tray 4Paper Size
Paper Type
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings] 3-12
Tray Mapping 
Mode
Logical 
Tray 0
Logical 
Tray 3
Logical 
Tray 4
Tray Mapping
Logical 
Tray 1
Logical 
Tray 2
Logical 
Tray 5
Logical 
Tray 6
Logical 
Tray 7
Logical 
Tray 8
Logical 
Tray 9
Print Reports
Sta tist ic s 
Page
PSFont List
PCL
Configura-
tion Page
HDD Direc-
tory List
Counter List 
Print
Downloaded From ManualsPrinter.com Manuals 
						

							[User Settings]3-13
1Press the [Utility/Counter] key.
2Press [User Settings].
[User Settings] is not displayed when the job log is full.
[Machine Settings]
All factory default values are shown in bold.
Item Description
[Language] Settings[English] / [French] / [Italian] / 
[German] / [Spanish] / [Portuguese] 
/ [Hangul] / [Simplified Chinese] / 
[Traditional Chinese] / [Czech] / 
[Hungarian] / [Polish] / [Slovak] / 
[Russian] / [Dutch] / [Danish] / [Nor-
wegian] / [Swedish] / [Finnish] / 
[Greek] / [Turkish] / [Catalan] / [Jap-
anese]
Specify the language for the screens that 
appear in the touch panel.
[Measurement Unit Setting] Settings[Inch] / [mm]
Select the measurement units for the values 
that appear in the touch panel screens.
The default setting is [Inch] for 120V 
model, and [mm] for other models.
Fax Settings
Default Fax 
Settings
Remote RX 
Enabled
Remote RX 
No.
Display Fax 
Activity
Fax RX
Fax TX
Downloaded From ManualsPrinter.com Manuals