Home > Epson > Printer > Epson C 2900 Manual

Epson C 2900 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson C 2900 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 681
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 157 Confidential 
     
    RRP6.2 STOPPER PIVOT (PL6.1.3), PIVOT TRANS L (PL6.1. 4), GEAR T4 (PL6.1.5), 
    SHAFT ASSY  PIVOT  (PL6.1.6)  , COVER HARNESS(PL6.1.8)  
    [Removal] 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.  
    3) Remove the DRUM CARTRIDGE. (RRP4.6)  
    Note: The FUSING part is very hot. Take added care not to get burned when performing the 
    service operation. 
    4) Remove the FUSER UNIT. (Removal 6.1) 
    5) Remove the COVER ASSY TOP. (RRP1.1) 
    6) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 
    7) Remove the COVER SIDE R. (RRP1.5) 
    8) Remove the COVER SIDE L. (RRP1.7) 
    9) Release the harness of the CLUTCH 
    ASSY DRV (PL3.1.1) from the hook of the 
    DRIVE ASSY PH (PL7.1.4). 
     
    10) Remove the E-ring that fixes the 
    CLUTCH ASSY DRV to the shaft, using a 
    miniature screwdriver, remove the 
    CLUTCH ASSY DRV.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 158 Confidential 
     
    11) Rotate the STOPPER PIVOT 
    (PL6.1.3), mate the tabs of the STOPPER 
    PIVOT with the notches of the DRIVE 
    ASSY MAIN (PL7.1.2). 
    12) Remove the STOPPER PIVOT from 
    the printer. 
    Note: When carrying out the work described next procedure, take care not to drop the GEAR T4. 
    13) Pull out the PIVOT TRANS L 
    (PL6.1.4), remove the GEAR T4 (PL6.1.5) 
    from the printer.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 159 Confidential 
     
    14) Remove the one screw (silver, tap, 
    8mm) that fixes the SHAFT ASSY PIVOT 
    (PL6.1.6) to the printer. 
    Note: When carrying out the work described next procedure, keep the TRANSFER ASSY slightly 
    lifted for ease of work. 
    15) Pull out the SHAFT ASSY PIVOT from 
    the printer. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 160 Confidential 
     
     [Replacement] 
    1) Mate the hole of the TRANSFER ASSY 
    with the hole of the printer frame, attach 
    the SHAFT ASSY PIVOT. 
    2) Secure the SHAFT ASSY PIVOT to the 
    printer with the one screw (silver, tap, 
    8mm). 
    Note: When carrying out the work 
    described next procedure, make sure 
    that the position of the GEAR T4 is 
    correctly. 
    Note: When carrying out the work described next procedure, keep the TRANSFER ASSY slightly 
    lifted for ease of work.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 161 Confidential 
     
    3) Attach the GEAR T4 to the printer, align 
    the holes of the GEAR T4, the printer 
    frame, and the TRANSFER ASSY, and 
    then insert the PIVOT TRANS L. 
    Note: When carrying out the work 
    described next procedure, ensure that 
    the flat face of the PIVOT TRANS L is 
    oriented to the direction shown in the 
    right. 
    4) Mate the tab of the STOPPER PIVOT 
    with the notch of the DRIVE ASSY MAIN, 
    attach the STOPPER PIVOT to the PIVOT 
    TRANS L.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 162 Confidential 
     
    5) Rotate the STOPPER PIVOT to the left, 
    secure the STOPPER PIVOT to the DRIVE 
    ASSY MAIN frame. 
    6) Mate the notch of the CLUTCH ASSY 
    DRV with the rib of the DRIVE ASSY PH, 
    secure the CLUTCH ASSY DRV to the 
    ROLL ASSY REGI with the E-ring by using 
    a pliers. 
    7) Route the harness of the CLUTCH 
    ASSY DRV through the hook of the DRIVE 
    ASSY PH. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 163 Confidential 
     
    RRP6.3 TRANSFER ASSY (PL6.1.7)   
    [Removal] 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.  
    3) Remove the DRUM CARTRIDGE. (RRP4.6)  
    Note: The FUSING part is very hot. Take added care not to get burned when performing the 
    service operation. 
    4) Remove the FUSER UNIT. (RRP6.1) 
    5) Remove the COVER ASSY TOP. (RRP1.1) 
    6) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 
    7) Remove the COVER SIDE R. (RRP1.5) 
    8) Remove the COVER SIDE L. (RRP1.7) 
    9) Close the TRANSFER ASSY (PL6.1.7). 
    Note: When carrying out the work described next procedure, take care not to scratch the belt 
    surface of the TRANSFER ASSY. 
    10) Release the hooks of the COVER 
    HARNESS (PL6.1.8), using a miniature 
    screwdriver, and then remove the COVER 
    HARNESS. 
    Note: When carrying out the work described below, leave the relay connector on the TRANSFER 
    ASSY harness side.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 164 Confidential 
     
    11) Release the harness from the pegs of 
    he TRANSFER ASSY, disengage the 
    connector (P/J281) of the TRANSFER 
    ASSY. 
    12) Release the harness coming from 
    printer from hook of the TRANSFER 
    ASSY. 
    13) Tilt the TRANSFER ASSY slowly. 
    14) Remove the STOPPER PIVOT (PL6.1.3), PIVO T TRANS L (PL6.1.4), GEAR T4 (PL6.1.5), and 
    SHAFT ASSY PIVOT (PL6.1.6). (RRP6.2) 
    15) Remove the TRANSFER ASSY from 
    the printer. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 165 Confidential 
     
     [Replacement] 
    1) Attach the TRANSFER ASSY to the 
    printer. 
    2) Attach the SHAFT ASSY PIVOT (PL6.1.6),GEAR  T4 (PL6.1.5), PIVOT TRANS L(PL6.1.4) and 
    STOPPER PIVOT (PL6.1.3). (RRP6.2). 
    3) Close the TRANSFER ASSY. 
    Note: When carrying out the work described next procedure, take care not to scratch the belt 
    surface of the TRANSFER ASSY. 
    4) Route the harness of the printer through 
    the hooks of the TRANSFER ASSY.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 166 Confidential 
     
    5) Engage the connector (P/J281) of the 
    TRANSFER ASSY, secure the relay 
    connector with the pegs of the TRANSFER 
    ASSY. 
    6) Attach the COVER HARNESS to the 
    TRANSFER ASSY. 
      
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson C 2900 Manual