Home > Epson > Printer > Epson C 2900 Manual

Epson C 2900 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson C 2900 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 681
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 127 Confidential 
     
    10) Disengage the connector (P/J141) of 
    the LED ASSY ERASE. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 128 Confidential 
     
    [Replacement] 
    1) Engage the connecter (P/J141) of the 
    LED ASSY  ERASE. 
    2) Attach the LED ASSY ERASE to the 
    printer. 
    3) Secure the LED ASSY ERASE to the 
    printer with two screws (silver, tap, 8mm). 
     
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 129 Confidential 
     
    RRP4.5 PWBA HVPS (PL4.1.19)   
    [Removal] 
    Note: Use the wrist strap to protect the PWB from the electrostatic. 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.  
    3) Remove the DRUM CARTRIDGE. (RRP4.6)  
    Note: The FUSING part is very hot. Take added care not to get burned when performing the 
    service operation. 
    4) Remove the FUSER UNIT. (RRP6.1) 
    5) Remove the TONER CARTRIDGE (K), (C), (M), (Y). (RRP5.4) 
    6) Remove the COVER ASSY TOP. (RRP1.1) 
    7) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 
    8) Remove the COVER SIDE R. (RRP1.5) 
    9) Remove the COVER SIDE L. (RRP1.7) 
    10) Remove the COVER REAR. (RRP1.3) 
    11) Remove the SWITCH ASSY INLET MG  SFP, COVER INLET. (RRP8.8) 
    12) Remove the FAN. (RRP8.1) 
    13) Remove the PWBA ESS SFP. (RRP8.3) 
    14) Remove the PWBA MCU. (RRP8.9) 
    15) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1) 
    16) Remove the TRANSFER ASSY. (RRP6.3) 
    17) Remove the UPPER UNIT. (RRP3.13) 
    18) Remove the HARN ASSY HVPS 
    (PL9.1.5) from the PWBA HVPS 
    (PL4.1.19).  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 130 Confidential 
     
    19) Remove the seven screws (silver, 
    6mm) that fix the PWBA HVPS to the 
    FRAME HVPS (PL4.1.20). 
    20) Remove the PWBA HVPS from the 
    FRAME HVPS. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 131 Confidential 
     
    [Replacement] 
    Note: Use the wrist strap to protect the PWB from the electrostatic.  
    1) Mate the notch and hole of the PWBA 
    HVPS with the tabs of the FRAME HVPS, 
    attach the PWBA HVPS. 
    2) Secure the PWBA  HVPS to the FRAME 
    HVPS with the seven screws (silver, 6mm).
    3) Engage the connector (P/J161) of the 
    HARN ASSY HVPS to the PWBAHVPS. 
     
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 132 Confidential 
     
    RRP4.6 DRUM CARTRIDGE (PL4.1.21)   
    [Removal] 
    Note: Remove the CASSETTE ASSY 250 before working. 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light. 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    3) Open the TRANSFER ASSY (PL6.1.7). 
    4) Put the paper on the TRANSFER ASSY 
    to protect the belt. 
    Note: When carrying out the work this 
    procedure, take care not to cover the 
    left and right of the belt guards with the 
    paper. 
     
    5) Rotate the four stoppers of the DRUM 
    CARTRIDGE (PL4.1.21) to the 
    counterclockwise direction, to release the 
    lock.  
    [NOTE] [NOTE]
    PAPER
    BELT GUARD
    4)
    5)
    5)
    5)
    5)
     
    6) Remove the DRUM CARTRIDGE 
    toward you by pulling it by the left and right 
    handles. 
     
    7) Lift up the DRUM CARTRIDGE from the 
    printer. HANDLE
    6)
    7)
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 133 Confidential 
     
    [Replacement] 
    1) Mate the left and right arrows on the 
    Handle of the DRUM CARTRIDGE with 
    the guides of the printer. 
     
    2) Push the DRUM CARTRIDGE into the 
    printer until it is stopped. HANDLE
    1)
     
    3) Rotate the four Stoppers of the DRUM 
    CARTRIDGE to clockwise. 
     
    4) Remove the paper from the TRANSFER 
    ASSY. [NOTE] [NOTE]
    PAPER
    BELT GUARD
    4)
    3)
    3)
    3)
    3)
    5) Close the TRANSFER ASSY. 
    6) Close the COVER ASSY FRONT MG. 
    7) Insert the CASSETTE ASSY 250 into the printer.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 134 Confidential 
     
    RRP5. DISPENSER 
    RRP5.1 DISPENSER ASSY (PL5.1.1)   
    [Removal] 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.  
    3) Remove the DRUM CARTRIDGE. (RRP4.6)  
    Note: The FUSING part is very hot. Take added care not to get burned when performing the 
    service operation. 
    4) Remove the FUSER UNIT. (RRP6.1) 
    5) Remove the TONER CARTRIDGE (K), (C), (M), (Y). (RRP5.4) 
    6) Remove the COVER ASSY TOP. (RRP1.1) 
    7) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 
    8) Remove the COVER SIDE R. (RRP1.5) 
    9) Remove the COVER SIDE L. (RRP1.7) 
    10) Remove the COVER REAR. (RRP1.3) 
    11) Remove the HOLDER ASSY TCRU (K ), (C), (M), (Y). (RRP5.3) 
    12) Remove the FAN. (RRP8.1) 
    13) Remove the PWBA ESS SFP. (RRP8.3) 
    14) Remove the PWBA MCU. (RRP8.9) 
    15) Remove the PWBA LVPS. (RRP8.5) 
    16) Remove the one screw (silver, with 
    washer, 6mm) that fixes the grounding 
    terminal of the SWITCH ASSY INLET MG 
    SFP (PL8.2.9). 
    Note: The GUIDE HARNESS AC and the printer are  connected with the harness, so they should 
    not be far apart when carrying out the work described next procedure.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 135 Confidential 
     
    17) Release the hook of the GUIDE 
    HARNESS AC (PL8.2.6), remove the 
    GUIDE HARNESS AC from the printer. 
    18) Release the harness of the HARN 
    ASSY OPTION (PL3.1.20) from the clamp 
    on the BRACKET MCU R (PL8.2.15). 
    19) Remove the two screws (silver, 6mm) 
    that fix the BRACKET MCU R to the 
    printer.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 136 Confidential 
     
    20) Remove the BRACKET MCU R from 
    the printer. 
    Note: Release only the HARN ASSY 
    INTERLOCK from the GUIDE HARNESS 
    FSR to prevent the faulty wiring when it 
    assembles it. 
    21) Release the harness of the HARN 
    ASSY INTERLOCK (PL8.2.5) from the 
    GUIDE HARNESS FSR (PL8.2.2). 
    22) Release the hook of the GUIDE 
    HARNESS FSR, to release the boss and 
    tab of the GUIDE HARNESS FSR. 
    Remove the GUIDE HARNESS FSR from 
    the printer.  
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson C 2900 Manual