Epson C 2900 Manual
Have a look at the manual Epson C 2900 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 47 Confidential 9) Remove the E-ring that fixes the CLUTCH ASSY DRV to the shaft, using a miniature screwdriver, remove the CLUTCH ASSY DRV. 10) Release the two hooks of the BEARING REGI (PL3.1.2), remove the BEARING REGI from the shaft.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 48 Confidential [Replacement] 1) Attach the BEARING REGI to the shaft of the ROLL ASSY REGI, secure the BEARING REGI with the hooks. 2) Mate the notch of the CLUTCH ASSY DRV with the rib of the DRIVE ASSY PH, secure the CLUTCH ASSY DRV to the ROLL ASSY REGI with the E-ring by using a pliers. 3) Route the harness of the CLUTCH ASSY DRV through the hook of the DRIVE ASSY PH.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 49 Confidential 4) Engage the connector (P/J262) of the CLUTCH ASSY DRV, secure the relay connector with the pegs of the DRIVE ASSY PH.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 50 Confidential RRP3.2 STOPPER CST (PL3.1.10) [Removal] 1) Remove the CASSETTE ASSY 250. (RRP2.1) 2) Remove the COVER CST. (RRP1.7) 3) Remove the one screw (silver, tap, 8mm) that fixes the STOPPER CST (PL3.1.10) to the printer. 4) Remove the STOPPER CST from the printer.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 51 Confidential [Replacement] 1) Mate the two holes of the STOPPER CST with the bosses of the printer, attach the STOPPER CST. 2) Secure the STOPPER CST to the printer with the one screw (silver, tap, 8mm).
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 52 Confidential RRP3.3 SOLENOID FEED MSI (PL3.1.11) [Removal] 1) Remove the CASSETTE ASSY 250. (RRP2.1) 2) Open the COVER ASSY FRONT MG (PL1.2.1). 3) Open the TRANSFER ASSY (PL6.1.7). Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light. 4) Remove the DRUM CARTRIDGE. (RRP4.6) Note: The FUSING part is very hot. Take added care not to get burned when performing the service operation. 5) Remove the FUSER UNIT. (RRP6.1) 6) Remove the COVER CST. (RRP1.7) 7) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 8) Remove the COVER SIDE R. (RRP1.5) 9) Remove the COVER SIDE L. (RRP1.7) 10) Remove the COVER REAR. (RRP1.3) 11) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1) 12) Remove the DRIVE ASSY PH. (RRP7.3) 13) Release the hook of the ROLL CORE MSI (PL3.2.3) on the left of the ROLL ASSY FEED (PL 3.2.4), and move the ROLL CORE MSI to left until it stops.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 53 Confidential 14) Release the groove on the ROLL ASSY FEED from the vertical pin mounted on the SHAFT ASSY FEED (PL3.2.2) by sliding the ROLL ASSY FEED to the left. 15) Close the COVER ASSY FRONT MG. 16) Remove the ROLL ASSY FEED from the SHAFT ASSY FEED by rotating the ROLL ASSY FEED 180 degrees. 17) Open the COVER ASSY FRONT MG.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 54 Confidential 18) Remove the SPRING FEED OUT (PL3.1.15) from the printer. 19) Release the hook of the GEAR ASSY FEED (PL3.1.19), remove the GEAR ASSY FEED from the SHAFT ASSY FEED (PL3.2.2). Note: When carrying out the work this procedure, pushing down the LEVER FEED (PL3.1.13). 20) Release the harness of the SOLENOID FEED MSI (PL3.1.11) from the hooks of the printer. Note: When carrying out the work described next procedure, leave the relay connector on the printer harness side.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 55 Confidential 21) Release the relay connector from the rib of the printer, disengage the connecter (P/J231) of the SOLENOID FEED MSI. 22) Remove the one screw (silver, tap, 8mm) that fixes the SOLENOID FEED MSI to the printer, remove the SOLENOID FEED MSI.
Chapter 3 Removal and Replacement Procedures Revision B Epson AcuLaser C2900N 3 - 56 Confidential [Replacement] 1) Mate the holes of the SOLENOID FEED MSI with the two bosses of the printer, secure the SOLENOID FEED MSI with the one screw (silver, tap, 8mm). 2) Engage the connecter (P/J231) of the SOLENOID FEED MSI, secure the relay connector with the rib of the printer. 3) Route the harness of the SOLENOID FEED MSI through the hooks of the printer. Note: When carrying out the work described next pr ocedure, it is easier to put the D-cut surface of the SHAFT ASSY FEED on the front.