Home > Epson > Printer > Epson C 2900 Manual

Epson C 2900 Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Epson C 2900 Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1734 Epson manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 681
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 97 Confidential 
     
    20) Remove the ACTUATOR ASSY NO 
    PAPER and the SPRING STP (PL3.2.16) 
    by releasing the left shaft of the 
    ACTUATOR ASSY NO PAPER from the 
    hole of the CHUTE UP. 
    21) Remove the SPRING STP from the 
    ACTUATOR ASSY NO PAPER. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 98 Confidential 
     
    [Replacement] 
    1) Attach the SPRING STP to the 
    ACTUATOR ASSY NO PAPER. 
    Note: When carrying out the work 
    described next procedure, ensure that 
    the SPRING STP is hung to ACTUATOR 
    NO PAPER and the CHUTE UP 
    correctly. 
    SPRING STP
    2) Insert the left shaft of the ACTUATOR 
    ASSY NO PAPER into the hole of the 
    CHUTE UP, hang the SPRING STP to the 
    CUHTE UP.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 99 Confidential 
     
    3) Insert the right shaft of the ACTUATOR 
    ASSY NO PAPER into the hole of the 
    CHUTE  UP. Attach  the ACTUATOR ASSY 
    NO PAPER. 
    Check the ACTUATOR ASSY NO PAPER movement , after the procedure 3 is completed. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 100 Confidential 
     
    RRP3.13 UPPER UNIT (Reference only)   
    [Removal] 
    1) Remove the CASSETTE ASSY 250. (RRP2.1) 
    2) Open the COVER ASSY FRONT MG (PL1.2.1). 
    Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.  
    3) Remove the DRUM CARTRIDGE. (RRP4.6)  
    Note: The FUSING part is very hot. Take added care not to get burned when performing the 
    service operation. 
    4) Remove the FUSER UNIT. (RRP6.1) 
    5) Remove the TONER CARTRIDGE (K), (C), (M), (Y). (RRP5.4) 
    6) Remove the COVER ASSY TOP. (RRP1.1) 
    7) Remove the COVER ASSY WINDOW TNR. (RRP1.6) 
    8) Remove the COVER SIDE R. (RRP1.5) 
    9) Remove the COVER SIDE L. (RRP1.7) 
    10) Remove the COVER REAR. (RRP1.3) 
    11) Remove the SWITCH ASSY INLET MG  SFP, COVER INLET. (RRP8.8) 
    12) Remove the FAN. (RRP8.1) 
    13) Remove the PWBA ESS SFP. (RRP8.3) 
    14) Remove the PWBA MCU. (RRP8.9) 
    15) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1) 
    16) Remove the TRANSFER ASSY. (RRP6.3) 
    17) Remove the one screw (silver, 6mm) 
    that fixes the grounding terminal of the 
    HARN ASSY GND (PL1.2.22), release the 
    HARN ASSY GND and all the harnesses 
    from the GUIDE HARNESS AC (PL8.2.6).
    Note: This step is only 2150cdn.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 101 Confidential 
     
    18) Release the hook of the GUIDE 
    HARNESS AC , remove the GUIDE 
    HARNESS AC from the printer 
    19) Release the harness of the HARN 
    ASSY OPTION (PL3.1.20) from the clamp 
    on the BRACKET MCU R (PL8.2.15). 
    20) Remove the two screws (silver, 6mm) 
    that fix the BRACKET MCU R to the 
    printer.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 102 Confidential 
     
    21) Remove the BRACKET MCU R from 
    the printer. 
    22) Remove the two screws (silver, tap, 
    8mm) that fix the front side of the printer 
    frame. 
    23) Remove the two screws (silver, tap, 
    8mm) that fix the under part of the 
    DISPENSER ASSY.  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 103 Confidential 
     
    24) Open the HOLDER TCRU (K), (C), 
    (M), and (Y), remove the one screw (silver, 
    tap, 8mm) that fixes the right side of the 
    printer frame. 
    25) Remove the HARNESS ASSY B 
    (PL9.1.12) and HARN ASSY OPTION 
    (PL3.1.20) from the hooks of the 
    DISPENSER ASSY. 
    26) Remove the one screw (silver, M4, 
    6mm) that fixes the rear side of the 
    DISPENSER ASSY and the one screw 
    (silver, tap, 8mm) that fixes the BRACKET 
    MCU L (PL8.2.18).  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 104 Confidential 
     
    27) Remove the one screw (silver, tap, 
    8mm) that fixes the left side of the printer 
    frame and the one screw (silver, tap, 8mm) 
    that fixes the BRACKET MCU L. 
    28) Remove the UPPER UNIT. 
      
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 105 Confidential 
     
    [Replacement] 
    Note: When carrying out the work 
    described next procedure, route the 
    harness of the TRANSFER ASSY 
    through the groove of the UPPER UNIT.
    1) Mate the two holes of the UPPER UNIT 
    with the bosses of the FEEDER ASSY MG 
    SFP and attach it. 
    2) Secure the BRACKET MCU L and the 
    left side of the printer frame with the two 
    screws (silver, tap, 8mm).  
    						
    							Chapter 3 Removal and Replacement Procedures Revision B 
    Epson AcuLaser C2900N 3 - 106 Confidential 
     
    3) Secure the rear side DISPENSER 
    ASSY with the one screw (silver, M4, 
    6mm) and BRACKET MCU L with the one 
    screw (silver, tap, 8mm). 
    4) Route the HARNESS ASSY B and the 
    HARN ASSY OOPTION to the 
    DISPENSER ASSY. Secure the harnesses 
    using the hooks on the DISPENSER 
    ASSY. 
    5) Open the HOLDER TCRU (K), (C), (M) 
    and (Y), secure the right side of the printer 
    frame with the one screw (silver, tap, 
    8mm).  
    						
    All Epson manuals Comments (0)

    Related Manuals for Epson C 2900 Manual