Canon printer MAXIFY MB5020 User Manual
Have a look at the manual Canon printer MAXIFY MB5020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 844
Changing the Paper SettingsThis machine prints received faxes to paper loaded in the machine beforehand. You can use the operationpanel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the
loaded paper.
Important
•
If the size of loaded paper is different from that specified in the paper size setting, the received faxes are stored in the machine's memory and Check the page size and tap [OK]. is displayed on the touch
screen. In this case, load the same...](http://img.usermanuals.tech/thumb/14/1019/w64_printer-maxify-mb5020-1478274301_d-843.jpg "Page 844
Changing the Paper SettingsThis machine prints received faxes to paper loaded in the machine beforehand. You can use the operationpanel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the
loaded paper.
Important
•
If the size of loaded paper is different from that specified in the paper size setting, the received faxes are stored in the machine's memory and Check the page size and tap [OK]. is displayed on the touch
screen. In this case, load the same...")
•Set the machine to enable you to initiate fax reception from a connected telephone (remotereception). Remote Reception • When the answering machine is connected to the machine: • If the answering machine is set to the answering mode, select User-friendly RX: ON in Advanced . If the call is a fax, the machine will receive the fax automatically. • If the answering mode is turned off on the answering machine, pick up the handset. If you hear the fax tone, wait for at least 5 seconds after it stops, then hang up the handset. • If Manual/auto switch: ON is selected in Advanced, set RX start time to longer than the time before the answering machine starts playing the answering message. After making this setting, we recommend that you call the answering machine using a mobile phone, etc. to confirm that messages are recorded successfully in the answering machine. • Set your answering machine to answering mode and adjust it as follows: - The entire message should be no longer than 15 seconds. - In the message, tell your callers how to send a fax. • When the call is a voice call: The telephone will ring when a call incomes. Pick up the handset, and talk on the telephone. Note • If the machine unexpectedly switches to fax reception during telephone calls, select User- friendly RX: OFF in Advanced . • If Manual/auto switch: ON is selected in Advanced, you must answer an incoming call by picking up the handset within the time specified in RX start time. Otherwise the machine will switch to fax reception. When FAX only mode is selected: • When the call is a fax: The machine will receive the fax automatically. 841
Note• If a telephone is connected to the machine, the telephone will ring when a call incomes. • You can change the number of times to ring the telephone with Ring count in Advanced . When DRPD or Network switch is selected: • When the call is a fax: The telephone will ring when a call incomes. The machine will receive the fax automatically when the fax ring pattern is detected. Note • You can change the number of times to ring the telephone. Advanced Settings of Receive Mode • When the call is a voice call: The telephone will ring when a call incomes. When the machine does not detect the fax ring pattern, the telephone will continue ringing. Pick up the handset, and talk on the telephone. Note • To use this feature, you need to subscribe to a compatible service provided by your telephone company. • For DRPD You need to select the appropriate ring pattern on the machine. Setting the DRPD Ring Pattern (US and Canada only) • For Network switch 842
The name of this service varies depending on the country or region of purchase. This settingmay not be also available depending on the country or region of purchase. 843
Changing the Paper SettingsThis machine prints received faxes to paper loaded in the machine beforehand. You can use the operationpanel to change the paper settings for printing faxes. Make sure that the settings are appropriate for the loaded paper. Important • If the size of loaded paper is different from that specified in the paper size setting, the received faxes are stored in the machine's memory and Check the page size and tap [OK]. is displayed on the touch screen. In this case, load the same size of paper as that specified in the paper size setting, then tap OK . You can also press the Stop button to close the message and print the stored documents in the machine's memory later. Printing a Document in Machine's Memory • If no paper is loaded, or paper has run out while printing is in progress, the received faxes are stored in the machine's memory and the error message for no paper is displayed on the touch screen. In this case, load paper and tap OK. You can also press the Stop button to close the message and print the stored documents in the machine's memory later. Printing a Document in Machine's Memory Note • If the sender sends a document that is larger than Letter-size or Legal-size, such as 11 x 17 inches, the sender's machine may send the fax automatically reduced in size or divided, or send only a part of the original. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap FAX . Using the Operation Panel The Fax standby screen is displayed. 3. Tap Function list . The Function list screen is displayed. 4. Tap FAX paper settings . The FAX paper settings screen is displayed. 5. Specify the settings. 844
A. Page size Select the page size from A4, Letter , or Legal . B. Type (Media type) The paper type is set to Plain paper. C. 2-sidedPrintSetting Select two-sided printing or single-sided printing. Two sided printing is available for black & white faxes. Color faxes are printed on the single-side of paper regardless of this setting. After 2-sided is selected for 2-sidedPrintSetting , tap Advanced to specify the stapling side. Note • When Page size is set to A4 or Letter , the received faxes are printed on the two-sides of paper. 6. Press the Back button twice to return to the Fax standby screen. 845
Memory ReceptionIf the machine was not able to print the received fax, the received fax is stored in the machine's memory.The FAX Memory lamp is lit and Received in memory. is displayed at the Fax standby screen. Important • If you unplug the power cord, all faxes stored in the machine's memory are deleted. The next time you turn the machine on, tap OK after a confirmation screen is displayed. The list of the faxes deleted from the machine's memory (MEMORY CLEAR REPORT) will be printed. If the machine receives a fax under one of the following conditions, the received fax will be automatically stored in the machine's memory. • The machine is set to store received faxes in its memory: When Do not print is selected for Received documents in Auto print settings under FAX settings , the received faxes are stored in the machine's memory. You can print the faxes stored in the machine's memory from the Memory reference screen in the Fax menu. Printing a Document in Machine's Memory Note • To print the received faxes automatically, select Print for Received documents in Auto print settings under FAX settings . Auto print settings • An error has occurred on the machine: If you select Print for Received documents in Auto print settings under FAX settings , a received fax will be printed automatically. However, if any of the following errors occurs, the received fax will not be printed. It will instead be stored in the machine's memory. When the error is resolved, the fax stored in the machine's memory is printed automatically. ◦ The amount of remaining ink is insufficient to print a fax: Replace the ink tank. Replacing an Ink Tank Note • You can set the machine to forcibly print a received fax even if the ink has run out. Set Print when out of ink in Auto print settings under FAX settings to Print . However, part or all of the fax may not be printed since the ink has run out. Also, the contents of the fax will not be stored in the machine's memory. If the ink has already run out, we recommend that Do not print be selected for Received documents in Auto print settings under FAX settings to store the received fax in the machine's memory. After you replace the ink tank and select Print for Received documents in Auto print settings , the fax stored in the machine's memory will be printed automatically. Auto print settings ◦ Paper has run out: 846
Load the paper and tap OK on the touch screen.◦ A different size of paper from that specified by Page size in FAX paper settings is loaded: Load the same size of paper as that specified by Page size in FAX paper settings , then tap OK on the touch screen. • You pressed the Stop button to cancel printing of a fax: Press the HOME button and tap FAX to resume printing of the fax. Note • The machine can store up to max. 250 pages* (max. 30 documents) of faxes in the machine's memory. * When using ITU-T No.1 chart (Standard mode) • If the machine's memory becomes full during memory reception, only pages which already have beenreceived are stored in the memory. Print the received faxes stored in the machine's memory, save them on the USB flash drive, or forward received faxes to the shared folder on the computer, then delete them from the machine's memory and have the sender resend the faxes. Document Stored in Machine's Memory 847
Receiving Faxes Using Useful Functions Saving Received Faxes Automatically on a USB Flash Drive Forwarding Received Faxes Automatically to Shared Folder on the Computer Remote Reception Rejecting Fax Reception Using the Caller ID Service to Reject Calls 848
Saving Received Faxes Automatically on a USB Flash DriveYou can save received faxes on a USB flash drive as PDF files automatically when receiving a fax. This section describes the procedure to enable the machine to save received faxes on a USB flash drive automatically. Important • Do not remove the USB flash drive from the machine when the machine is set to save received faxes on a USB flash drive automatically. • For safety reasons, we recommend backing up faxes saved on a USB flash drive to another mediaperiodically to avoid unexpected accidents. • We assume no responsibility for damage to or loss of data for whatever reason even within the warrantyperiod. • Awaiting document processing. is displayed on the Fax standby screen and the faxes are stored in the machine's memory when the received faxes are not saved on the USB flash drive because the USB flash drive is not inserted or because it is not writable. You can save the faxes stored in the machine's memory to the USB flash drive manually. Delete the unnecessary fax from machine's memory after saving to the USB flash drive. Saving a Document in Machine's Memory to USB Flash Drive Deleting a Document in Machine's Memory 1. Make sure that the machine is turned on. 2. Insert the USB flash drive into the USB flash drive port. 3. Flick the HOME screen, then tap Setup . Using the Operation Panel 4. Tap Device settings . 5. Tap FAX settings . 6. Tap Auto save setting . 7. Tap ON. 8. Tap USB flash drive . Note • You can save up to 250 pages of fax as one PDF file. • You can save up to 2000 PDF files on a USB flash drive. 849
•If the USB flash drive is removed or becomes full while saving faxes is in progress, the error message isdisplayed on the touch screen. Tap OK to dismiss the error.• The folder and file name of faxes saved on the USB flash drive is as follows: • Folder name: CANON_SC\FAXDOC\0001 • File name (file extension: PDF): Running numbers, starting from FAX_0001 • File date: The date and time of saving as set in the machine. For details on how to set the date and time: Setting the Date and Time • When removing the USB flash drive, set Auto save setting to OFF . 850