Canon printer MAXIFY MB5020 User Manual
Have a look at the manual Canon printer MAXIFY MB5020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
About Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at night. In addition, you can specify the time range to reduce the operating noise. Important • Set the current date and time in advance. Setting the Sender Information • Authentication by the administrator password may be required to change the setting. About the Machine Administration If you do not know the administrator password, ask the administrator of the machine you are using. Follow the procedure below to perform setting. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Quiet setting . Using the Operation Panel 3. Tap Use quiet mode or Use during specified hours . • When Use quiet mode is selected: The confirmation screen is displayed, then the icon appears as the Quiet setting menu icon. • When Use during specified hours is selected: The Quiet hours screen is displayed. A. Tap to display the screen below. 271
1. Tap the numbers to specify the starting time. You can specify the hour from 0 to 24. 2. Tap to confirm the starting time. After specifying the starting time, specify the ending time following the same procedure. B. Tap to confirm the time to start and to end. You can reduce the operating noise during the specified time. The confirmation screen is displayed, then the icon appears as the Quiet setting menu icon. Important • Operating speed may be reduced compared to when the quiet mode is not selected. • This function may not be so effective depending on the machine's setting. Furthermore, certain noise, such as when the machine is preparing for printing, is not reduced. Note • You can set the quiet mode from the operation panel of the machine, the printer driver, or ScanGear (scanner driver). No matter how you set the quiet mode, the mode is applied when you perform operations from the operation panel of the machine or printing and scanning from the computer. 272
Using the Machine with the Access Point ModeBy using the machine as an access point in an environment that does not have wireless LAN router or access point, or by using the machine as an access point temporarily in an environment that has wireless LAN router or access point, you can connect the machine to an external device such as a computer or a smartphone and print/scan from them. This section describes how to enable the access point mode, the access point name of the machine, and the security setting. How to enable the Access Point Mode Printing/Scanning with the Access Point Mode How to terminate the Access Point Mode Setting of the Access Point Mode Important • Before using the machine with the access point mode, confirm the usage restrictions then switch the machine to the access point mode. Restrictions • If you use the machine with the access point mode for the long time, it is recommended that you change the default access point name and the default password to the combination of numbers and letters with the point of view of security. How to enable the Access Point Mode Enable the access point mode following the procedure below. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap LAN settings . 5. Tap Change LAN . 6. Tap Access point mode active . The access point name (SSID) that set currently is displayed. (When using the machine for the first time, the default setting is displayed.) When detecting the machine from the external device such as a computer or a smartphone, you can detect with the access point name (SSID). 273
Note• Tapping Details displays the security setting. The password required when connecting from the external device is also displayed. • You can specify the access point name (SSID) and the security setting optionally. Setting of the Access Point Mode 7. Tap OK. The access point mode is enabled and the machine can be used as an access point. Printing/Scanning with the Access Point Mode Print/Scan with the access point mode following the procedure below. 1. Connect an external device such as a computer or a smartphone to the machine via wireless LAN. Perform wireless LAN settings with your external device, then assign the access point name specified for the machine as a destination. Note • For details on how to perform wireless LAN settings with an external device, refer to the device's instruction manual. • When a WPA2-PSK (AES) password is valid on the machine, entering the password is required to connect an external device to the machine via wireless LAN. Enter the password specified for the machine. 2. Start printing or scanning from an external device such as a computer or a smartphone. Note • For details on how to print or scan from an external device such as a computer or a smartphone via wireless LAN, refer to the device's or application's instruction manual. How to terminate the Access Point Mode In environments that the machine is connected with the computer over the wireless LAN usually, set the machine to the wireless LAN connection following the procedure below when you finish using the machine with the access point mode temporarily. 1. Flick the HOME screen, then tap Setup . Using the Operation Panel 2. Tap Device settings . 274
3.Tap LAN settings .4. Tap Change LAN . 5. Tap Wireless LAN active . If you do not use the machine over wireless LAN, select Wired LAN active or Disable LAN . Setting of the Access Point Mode Specify the settings for the access point mode following the procedure below. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap LAN settings . 5. Tap Other settings . 6. Tap Access point mode settings . The screen to enter the access point name (SSID) is displayed. 7. Tap the touch screen. 8. Enter the access point name (up to 32 characters). Enter the access point name when you use the machine as an access point. 9. Tap OK to finish entering the name. 10. Tap OK to finish specifying the access point name. 11. Select the security setting. Disable Finishes the access point settings without specifying the security setting. WPA2-PSK (AES) Specifies the security setting applying WPA2-PSK (AES). Proceed to the next step when the screen to specify the password is displayed. 12. Tap the touch screen. 275
13.Enter the password (8 to 10 characters).14. Tap OK to finish entering the password. 15. Tap OK to finish specifying the password setting. Note • If you change the access point mode setting of the machine, also change the access point setting of the external device such as a computer or a smartphone. 276
Registering the Favorite Settings (Custom profiles)You can register the favorite copying, scanning, or faxing settings and call them up from the HOME screen. You can register up to 20 settings. Registering the Setting Calling Up the Registered Setting Editing/Deleting the Registered setting Registering the Setting Tap Save profile on each standby screen or on the screen displayed after the settings are specified. Copy standby screenScan standby screenFax transmission standby screen When the confirmation screen of Save profile is displayed, tap Yes. When the screen to enter the name of the setting is displayed, enter the name, then tap Register. Note • If you tap Register without entering the name, the name currently shown is applied as the name of the setting. Calling Up the Registered Setting Follow the procedure below to call up the registered setting. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Custom profiles . Using the Operation Panel 3. Tap the setting you want to call up. Note • You can change the displayed items by tapping Switch view. Editing/Deleting the Registered setting Follow the procedure below to edit or delete the registered setting. 277
1.Make sure that the machine is turned on.2. Flick the HOME screen, then tap Custom profiles . Using the Operation Panel 3. Tap Edit/delete . You can change the order or name of the registered settings and delete the settings. • To change the order of the registered settings 1. Tap Rearrange . 2. Tap the setting you want to move. 3. Tap or to move the selected setting. 4. Tap Apply . 5. Tap Exit. • To change the name of the registered settings 1. Tap Rename . 2. Tap the setting you want to rename. 3. Enter the new name, then tap OK. Entering Numbers, Letters, and Symbols 4. Tap Exit. • To delete the registered settings 1. Tap Delete . 2. Tap the setting you want to delete. 3. Tap Yes on the displayed screen. 4. Tap Exit. 278
Checking the Total Number of Uses of the MachineYou can check the total number of uses of the machine (e.g. the total number of printing, copying, sending/ receiving faxes, or scanning).1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Records of use . Using the Operation Panel The Records of use screen is displayed. 3. Tap the item to check. Total sheets used on the device Displays the total number of printing. You can check the total number of black and white printing, color printing, printing on plain paper, printing on paper other than plain paper, One-sided printing, or Two-sided printing respectively. No. of sheets used for copying Displays the total number of copying. You can check the total number of black and white copying, color copying, copying on plain paper, copying on paper other than plain paper, One-sided copying, Two-sided copying, 2-on-1 copying (One-sided/Two-sided), or 4-on-1 copying (One-sided/Two-sided) respectively. No. of sheets used for FAX Displays the total number of received or printed faxes. You can check the total number of black and white printing, color printing, One-sided printing, or Two-sided printing respectively. Sheets used for other functions Displays the total number of printing other than copying or faxing. You can check the total number of black and white printing, color printing, printing on plain paper, printing on paper other than plain paper, One-sided printing, or Two-sided printing respectively. Number of FAX sheets sent Displays the total number of sent faxes. You can check the total number of black and white transmission or color transmission respectively. Number of sheets scanned Displays the total number of scanning. You can check the total number of scanning on the platen glass or that in the ADF respectively. Note • The record of the total number of uses is not reverted even if the machine is reverted back to the default by Reset setting in Device settings . 279
Information about Network Connection Useful Information about Network Connection 280