Canon Maxify Mb5320 User Guide
Have a look at the manual Canon Maxify Mb5320 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting the Telephone Line TypeBefore using your machine, make sure you set the correct telephone line type for your telephone line. If you are unsure of your telephone line type, contact your telephone company. For xDSL or ISDN connections, contact the telephone company or service provider to confirm your line type. Important • For users in China: After plugging the power cord and turning on the machine, the telephone line type is selected automatically. However, if the machine is connected to the control device such as an xDSL modem or terminal adapter, the telephone line type may not be selected correctly. In this case, set the line type manually. For details on how to set the Telephone line type manually in China: Setting the Telephone Line Type Manually in China Note • Telephone line type will not appear in countries or regions where Rotary pulse is not supported. • You can print USER'S DATA LIST to check the current setting. Summary of Reports and Lists 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap FAX settings . 5. Tap FAX user settings . 6. Tap Telephone line type . 7. Tap a telephone line type. 791
Rotary pulseSelect when your telephone line type is pulse dialing. Touch tone Select when your telephone line type is tone dialing. Setting the Telephone Line Type Manually in China This section describes the procedure to set the telephone line type manually in China. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap FAX settings . 5. Tap FAX user settings . 6. Tap Telephone line auto selection . The current telephone line type is displayed. 7. Check the current telephone line type, then tap OK. Note • If you do not need to change the telephone line type, press the HOME button to return to the HOME screen. 8. Tap OFF. 9. Tap a telephone line type. 792
Rotary pulseSelect when your telephone line type is pulse dialing. Touch tone Select when your telephone line type is tone dialing. 793
Setting the Receive ModeSet the receiving operation (receiving mode). For details on how to set the receive mode: Setting the Receive Mode You can select the appropriate mode. For details on the selectable receive mode: About the Receive Mode For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode Note • The receiving operation procedure varies depending on the selected receive mode. For details on receiving method depending on each receive mode: Receiving Faxes • If you want to use a single telephone line for faxes and voice calls, you need to connect a telephone oran answering machine to the external device jack of this machine. For details on how to connect the telephone or the answering machine to the machine: Basic Connection Setting the Receive Mode This section describes the procedure to select the receive mode. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap FAX . Using the Operation Panel 3. Tap Function list . The Function list screen is displayed. 4. Tap Receive mode settings . 5. Tap a receive mode, then tap OK. Note • By tapping Advanced, you can specify the advanced settings of each receive mode. For details on the advanced settings of the receive mode: Advanced Settings of Receive Mode • For details on the receive mode: About the Receive Mode 794
•DRPD is available only in the US and Canada.• Network switch may not be available depending on the country or region of purchase. • Refer to Receiving Faxes for information on receiving faxes or the procedure for each receive mode. About the Receive Mode You can select the receive mode suitable for your fax use conditions: whether you use a dedicated line for fax, etc. Receive modeYour fax use conditionReceiving operationTEL priority modeWhen mainly receiving voice calls (with a telephone or answering machine connected to the machine):When a call incomes, the telephone will ring. Pick up the handset. If the call is a voice call, talk on the telephone. If the call is a fax, hang up the handset after the machine starts receiving the fax. Note • The telephone may not ring when a call incomes even if it isconnected to the machine, depending on the type or settings of the telephone. DRPD or Network switchWhen receiving voice calls (with a telephone or answering machine connected to the machine) and subscribing to a ring pattern detection service provided by your telephone company:When a call incomes, the telephone will ring. The machine detects a fax call by the fax ring pattern. If the call is a fax, the machine will receive the fax automatically. If the machine does not detect the fax ring pattern, the telephone will continue ringing. Note • The telephone may not ring when a call incomes even if it is connected to the machine, depending on the type or settings of the telephone. FAX only modeWhen not receiving voice calls:When a fax incomes, the machine will receive the fax automatically. Advanced Settings of Receive Mode You can specify the advanced settings of each receive mode. • Advanced setting in TEL priority mode You can specify the following setting items. ◦ Manual/auto switch: ON /Manual/auto switch: OFF If you select Manual/auto switch: ON , the machine automatically receives faxes after the external device rang a specified length of time. You can specify the length of time until automatic reception is started. 795
◦RX start time You can specify the length of time until automatic reception is started when Manual/auto switch: ON is selected. Specify the length of time and tap OK.◦ User-friendly RX: ON /User-friendly RX: OFF If you select User-friendly RX: ON , the machine automatically switches from telephone calling to fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone or the answering machine answers. When you have an answering machine connected to the machine, select User-friendly RX: ON to switch to fax reception automatically after the answering machine answers. If you select User-friendly RX: OFF , the machine does not switch from telephone calling to fax reception automatically even if the machine detects the fax signal (CNG signal). Select User- friendly RX: OFF if you want the machine not to switch automatically during a call. Note • If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device rings specified with Ring count in FAX only mode is available in TEL priority mode . If you want to specify the number of times the external device rings in TEL priority mode, select FAX only mode on the Receive mode settings screen, specify the number of times the external device rings with Ring count, then switch to TEL priority mode in Receive mode settings . • If you subscribe to Duplex Ringing service in Hong Kong, we recommend that you select Manual/ auto switch: OFF . • Advanced setting in FAX only mode You can specify the following setting item. ◦ Ring count You can specify the number of times the external device rings when incoming. Specify the number of time and tap OK. • Advanced setting in DRPD You can specify the following setting items. ◦ Ring pattern ( Normal ring/Double ring /Short-short-long /Short-long-short ) Sets the distinctive ring pattern of a call that the machine assumes is a fax call. If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your telephone company. Setting the DRPD Ring Pattern (US and Canada only) ◦ Ring count You can specify the number of times the external device rings when incoming. Specify the number of time and tap OK. • Advanced setting in Network switch You can specify the following setting item. ◦ Ring count You can specify the number of times the external device rings when incoming. 796
Specify the number of time and tap OK. Setting the DRPD Ring Pattern (US and Canada only) If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service provided by your telephonecompany, your telephone company will assign two or more telephone numbers with distinctive ring patterns to your single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your machine will automatically monitor the ring pattern, and will automatically receive the fax if the ring pattern is a fax call. To use DRPD, follow the procedure below to set the fax ring pattern that matches the pattern assigned by your telephone company. Note • Contact your local telephone company for detailed information on this service. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap FAX . Using the Operation Panel 3. Tap Function list . The Function list screen is displayed. 4. Tap Receive mode settings . 5. Tap DRPD . 6. Tap Advanced . 7. Select the ring pattern that your telephone company assigned to your fax number. 8. Specify the number of time and tap OK. 9. Tap OK. The Function list screen is displayed. 797
Setting the Sender InformationYou can set the sender information such as date/time, unit name, and unit fax/telephone number. About the Sender Information Setting the Date and Time Setting Daylight Saving Time (Summer Time) Registering User Information About the Sender InformationIf the unit name and unit fax/telephone number are registered, they are printed with date and time as sender information on the recipient's fax. A. Date and time of transmission B. Unit fax/telephone number C. Unit name D. The registered recipient's name is printed when sending faxes. E. Page number Note • You can print USER'S DATA LIST to confirm the sender information you have registered. Summary of Reports and Lists • When sending faxes in black & white, you can select whether to print the sender information inside or outside the image area. Specify the setting on TTI position in Advanced FAX settings under FAX settings . Advanced FAX settings • You can select the date print format from three formats: YYYY/MM/DD, MM/DD/YYYY , and DD/MM/ YYYY . Select the date print format on Date display format under Device user settings . Device user settings Setting the Date and Time This section describes the procedure to set the date and time. 798
1.Make sure that the machine is turned on.2. Flick the HOME screen, then tap Setup . Using the Operation Panel 3. Tap Device settings . 4. Tap Device user settings . 5. Tap Date/time setting . 6. Set the date. 1. Tap a setting item to change. 2. Tap the number to enter. Enter only the last two digits of the year. 3. Tap OK. 4. Tap OK again when all settings are completed. 7. Set the time. 1. Tap a setting item to change. 799
2. Tap the number to enter. Enter the date and time in 24-hour format. 3. Tap OK. 4. Tap OK again when all settings are completed. 8. Press the HOME button to return to the HOME screen. Setting Daylight Saving Time (Summer Time) Some countries adopt the daylight saving time (summer time) system that shifts the clock time forward at certain periods of the year. You can set your machine to automatically change the time by registering the date and time that daylight saving time (summer time) begins and ends. Important • Not all the latest information of all countries or regions is applied for Daylight saving time setting by default. You need to change the default setting according to the latest information of your country or region. Note • This setting may not be available depending on the country or region of purchase. 1. Make sure that the machine is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel 800