Canon Maxify Mb5320 User Guide
Have a look at the manual Canon Maxify Mb5320 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1007Cause Possible causes include the following.• There is no paper in the cassette 1. • Paper is not loaded in the cassette 1 properly. Action Take the corresponding actions below. • Load paper in the cassette 1. • Align the paper guides with the both edges of the paper when you load paper in the cassette 1. After carrying out the above measures, tap OK on the touch screen to dismiss the error. Note • The loadable paper differs depending on the paper source. A4, Letter, or Legal-sized plain paper can be loaded in both the cassette 1 and the cassette 2. • If you want to cancel printing, press the machine's Stop button. 1061
1008Cause Possible causes include the following.• There is no paper in the cassette 2. • Paper is not loaded in the cassette 2 properly. Action Take the corresponding actions below. • Load paper in the cassette 2. • Align the paper guides with the both edges of the paper when you load paper in the cassette 2. After carrying out the above measures, tap OK on the touch screen to dismiss the error. Important • The loadable paper differs depending on the paper source. The loadable paper in the cassette 2 is A4, Letter, or Legal-sized plain paper. Note • If you want to cancel printing, press the machine's Stop button. 1062
1200Cause The front cover is open. Action Close the front cover and wait for a while.Do not close it while you are replacing an ink tank.1063
1310Cause The size of paper may not be compatible with automatic duplex printing. Action The sizes of media suitable for auto duplex printing are A4 and Letter. Make sure that the size of the paper loaded in the machine is correct. Tapping OK on the touch screen will eject the paper and restart printing from the front side of the next paper. The reverse side of the ejected sheet will not be printed.1064
1575Cause Ink cannot be correctly detected. Action If an ink tank becomes empty, replace it. An ink tank cannot be replaced until it becomes empty. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.1065
1600Cause Ink may have run out. Action Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, tap OK on the machine with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition. Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. 1066
1660Cause The ink tank is not installed. Action Install the ink tank.1067
1688Cause The ink has run out. Action Replace the ink tank and close the front cover. Printing under the current condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. Note • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. 1068
1700Cause The ink absorber is almost full. Action Tap OK on the touch screen to continue printing. Contact the service center.1069
1701Cause The ink absorber is almost full. Action Tap OK on the touch screen to continue printing. Contact the service center.1070