Canon Maxify Mb5320 User Guide
Have a look at the manual Canon Maxify Mb5320 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Cleaning the Machine Cleaning the Exterior of the Machine Cleaning the Platen Glass and Document Cover Cleaning the ADF (Auto Document Feeder) Cleaning the Paper Feed Roller Cleaning the Inside of the Machine (Bottom Plate Cleaning) Cleaning the Pad in the Cassette 231
Cleaning the Exterior of the MachineBe sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently.Smooth out wrinkles on the cloth if necessary before cleaning. Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before unplugging the power cord. • The machine cannot send or receive faxes when the power is turned off. • If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause problems such as print head blockage and poor printing results. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine. • When cleaning the touch screen, be sure to use a soft cloth, such as eyeglasses cleaning cloth, to wipe off dirt on the surface. Do not apply excessive pressure. Never use cleaners containing organic solvents to wipe the touch screen. 232
Cleaning the Platen Glass and Document Cover Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before unplugging the power cord. • The machine cannot send or receive faxes when the power is turned off. • If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause problems such as print head blockage and poor printing results. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine. Use a soft, clean, lint-free and dry cloth. Wipe away smudges and dust on the inner glass surfaces of the platen glass and the document cover (A, B, and C), and on the white parts that touch them (D, E, and F). Make sure not to leave any residue, especially on the glass surfaces. Important • The inner side of the document cover (white sheet) (D) is easily damaged, so wipe it gently. • Glue, ink, correction fluid, or other substances on the ADF glass (B and C in the above figure) will cause black streaks on scanned images. If there is any on the glass, gently wipe it off. 233
Cleaning the ADF (Auto Document Feeder)Be sure to use a soft, clean, lint-free and dry cloth to clean the ADF (Auto Document Feeder). Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • The power cannot be turned off while the machine is sending or receiving a fax, or when unsentfaxes are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before unplugging the power cord. • The machine cannot send or receive faxes when the power is turned off. • If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord. • Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Paper tissue powder or fine threads may remain inside the machine and cause problems such as print head blockage and poor printing results. • Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to cleanthe machine, as this may cause a malfunction or damage the surface of the machine. 1. Open the document tray. 2. Open the document feeder cover. 3. With the clean cloth, wipe off any paper dust from the inside of the document feeder cover (A). 234
4. After wiping, close the document feeder cover by pushing it until it clicks into place. 5. Close the document tray. 235
Cleaning the Paper Feed RollerIf the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary. You need to prepare: three sheets of A4 or Letter-sized plain paper1. Make sure that the power is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel The setup menu screen will appear. 3. Tap Maintenance . The Maintenance screen will appear. 4. Tap Roller cleaning . The confirmation screen will appear. 5. Tap Yes. 6. Tap the paper source to clean ( Cassette 1 or Cassette 2 ). 7. Follow the message to remove any paper from the paper source you selected in step 6. 8. Tap OK. The paper feed roller will rotate as it is cleaned. 9. Make sure that the paper feed roller has stopped rotating, then follow the message to load three sheets of A4 or Letter-sized plain paper in the paper source you selected in step 6. 10. Extend the output tray extension, then open the paper output support. 236
11.Tap OK. The machine starts cleaning. The cleaning will be complete when the paper is ejected.12. When the completion message appears, tap OK. If the problem is not resolved after cleaning the paper feed roller, contact the service center. 237
Cleaning the Inside of the Machine (Bottom Plate Cleaning)Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper mayget dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.1. Make sure that the power is turned on. 2. Flick the HOME screen, then tap Setup . Using the Operation Panel The setup menu screen will appear. 3. Tap Maintenance . The Maintenance screen will appear. 4. Tap Bottom plate cleaning . The confirmation screen will appear. 5. Tap Yes. 6. Follow the message to remove any paper from the cassette 1, then tap OK. 7. Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, then unfold the paper. 8. Fold one side of the opened paper in another half, aligning the edge with the center crease, unfold the paper, then tap OK. 238
9. Load only this sheet of paper in the cassette 1 with the ridges of the creases facing up and the edge of the half with no crease facing to the far side. Important • The cassette 2 is not available for the Bottom Plate Cleaning procedure. Be sure to load paper in the cassette 1. 10. Extend the output tray extension, then open the paper output support. 11. Tap OK. The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. 12. When the completion message appears, tap OK. Note • When performing Bottom Plate Cleaning again, be sure to use a new piece of paper. If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained. Wipe off any ink from the protrusions using a cotton swab or the like. Important • Be sure to turn off the power and unplug the power cord before cleaning the machine. • The power cannot be turned off while the machine is sending or receiving a fax, or when unsent faxes are stored in the machine's memory. Make sure if the machine completed sending or receiving all the faxes before unplugging the power cord. 239
•The machine cannot send or receive faxes when the power is turned off.• If the power cord is unplugged, all documents stored in the machine's memory will be lost. Send or print a necessary document, or save it on a USB flash drive before unplugging the power cord.240