Canon Maxify Mb5020 User Guide
Have a look at the manual Canon Maxify Mb5020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Important• Some applications do not support continuous scanning from the ADF. For details, refer to theapplication's manual. Note • To scan magazines containing many color photos, select Magazine (Color). 3. Click Preview . Preview image appears in the Preview area. Important • Preview is not displayed when an ADF type is selected for Select Source. Note • Colors are adjusted based on the document type selected in Select Source. 4. Set Destination . Note • Skip ahead to Step 7 when an ADF type is selected for Select Source. 5. Set Output Size according to purpose. Output size options vary by the item selected in Destination. 6. Adjust the cropping frames (scan areas) as required. Adjust the size and position of the cropping frames on the preview image. Adjusting Cropping Frames (ScanGear) 7. Set Image corrections as required. 651
8.Click Scan. Scanning starts. Note • Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.). • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box. Related Topic Basic Mode Tab 652
Scanning in Advanced ModeUse the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning. Refer to " Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple documents at one time. Refer to " Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode " to scan multiple documents placed on the ADF (Auto Document Feeder). Important • The following types of documents may not be scanned correctly. In that case, click (Thumbnail) on the Toolbar to switch to whole image view and scan. • Photos that have a whitish background • Documents printed on white paper, hand-written text, business cards, etc. • Thin documents • Thick documents • The following types of documents may not be scanned correctly. • Documents smaller than 1.2 inches (3 cm) square • Photos that have been cut to various shapes 1. Place the document on the Platen, then start ScanGear (scanner driver). Placing Items (When Scanning from a Computer) Starting ScanGear (Scanner Driver) 2. Click the Advanced Mode tab. The tab switches to Advanced Mode. Note • Settings are not retained when you switch modes. 653
3.Set Input Settings according to the document or purpose.4. Click Preview . Preview images appear in the Preview area. 5. Set Output Settings . 6. Adjust the cropping frame (scan area), correct image, and adjust colors as required. Adjusting Cropping Frames (ScanGear) Image Settings Color Adjustment Buttons 7. Click Scan. Scanning starts. Note • Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.). • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box. Related Topic Advanced Mode Tab 654
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Use the Advanced Mode tab to specify the image brightness, color tone, etc. and scan multiple documents placed on the ADF (Auto Document Feeder) at one time. When using a model supporting ADF duplex scanning, you can scan both sides of the documents automatically from the ADF. When scanning from the ADF, documents are scanned without preview.1. Place the documents on the ADF of the machine, then start ScanGear (scanner driver). Placing Documents (ADF (Auto Document Feeder)) Starting ScanGear (Scanner Driver) 2. Click the Advanced Mode tab and select Document (ADF Simplex) or Document (ADF Duplex) for Select Source . Note • Settings are not retained when you switch modes. • You can select Document (ADF Duplex) when using a model supporting ADF duplex scanning. 3. Set Input Settings according to the document or purpose. 4. Set Output Settings . 5. Make image corrections and color adjustments as required. Image Settings Color Adjustment Buttons 6. Click Scan. Scanning starts. 655
Note• Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.). • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box. Related Topic Advanced Mode Tab 656
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) You can scan two or more photos (small documents) on the Platen at one time on the Basic Mode tab and Advanced Mode tab. This section explains how to scan multiple documents from the Basic Mode tab. Important • To scan multiple documents as a single image, scan in whole image view. • The following types of documents may not be cropped correctly. In that case, adjust the cropping frames (scan areas) in whole image view and scan. • Photos that have a whitish background • Documents printed on white paper, hand-written text, business cards, etc. • Thin documents • Thick documents Scanning Multiple Documents in Whole Image View • The following types of documents may not be scanned correctly. • Documents smaller than 1.2 inches (3 cm) square • Photos that have been cut to various shapes Note • You can also scan multiple documents at one time from the Advanced Mode tab. Use the Advanced Mode tab to make advanced scan settings such as the color mode, output resolution, image brightness, and color tone. • Refer to the corresponding sections below for details on the Basic Mode tab and Advanced Mode tab. Basic Mode Tab Advanced Mode Tab 1. Place the document on the Platen, then start ScanGear (scanner driver). Placing Items (When Scanning from a Computer) Starting ScanGear (Scanner Driver) 2. Set Select Source according to the document placed on the Platen. 657
3. Click Preview . Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size. 4. Set Destination . 5. Set Output Size according to purpose. 6. Adjust the cropping frames and set Image corrections as required. Note • You can correct each image separately. Select the frame you want to correct. • In thumbnail view, you can only create one cropping frame per image. To create multiple cropping frames in an image, scan in whole image view. Scanning Multiple Documents in Whole Image View 658
7.Select the images you want to scan. Select the checkboxes of the images you want to scan.8. Click Scan. Scanning Multiple Documents in Whole Image View Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image. Note • Positions of slanted documents are not corrected in whole image view. 1. After previewing images, click (Thumbnail) on the Toolbar. Switch to whole image view. Note • When the whole image is displayed, the icon changes to (Whole Image). 2. Set Destination . 3. Set Output Size according to purpose. Invert aspect ratio will be enabled when Output Size is set to anything but Flexible. Click this button to rotate the cropping frame. Click again to return it to the original orientation. 4. Adjust the cropping frames. 659
Adjust the size and position of the cropping frames on the preview image. You can also create two or more cropping frames. If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned. Adjusting Cropping Frames (ScanGear) 5. Set Image corrections as required. 6. Click Scan. Areas framed by broken lines are scanned. Note • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box. 660