Canon Maxify Mb5020 User Guide
Have a look at the manual Canon Maxify Mb5020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Scan Image 1Start Scanning Image 1 Scans the first item. Scan Image 2Start Scanning Image 2Scans the second item. Adjust cropping frames You can adjust the scan area in preview. If no area is specified, the image of the size selected in Select Output Size will be saved. If an area is specified, only the image in the cropping frame will be scanned and saved. Adjusting Cropping Frames in the Image Stitch Window Save SaveSaves the two scanned images as one image. 641
CancelCancels Stitch scan. (2) Toolbar You can delete the scanned images or adjust the previewed images. (Delete) Deletes the scanned image. (Enlarge/Reduce) Allows you to enlarge or reduce the preview image. Left-clicking the Preview area enlarges the displayed image. Right-clicking the Preview area reduces the displayed image. (Rotate Left) Rotates the preview image 90 degrees counter-clockwise. (Invert Vertically) Rotates the preview image 180 degrees. (Rotate Right) Rotates the preview image 90 degrees clockwise. (Open Guide) Opens this page. (3) Thumbnail View Area Displays the thumbnails of the scanned images. Appears blank if none has been scanned. (4) Preview Area Displays the scanned images. You can adjust the layout by dragging the scanned image or check the results of the settings made in " (1) Settings and Operation Buttons ." 642
When no image has been scanned: After scanning the first item by clicking Start Scanning Image 1: The image is scanned in the direction specified in Scan Direction, and 2 appears next to it. After scanning the second item by clicking Start Scanning Image 2: The two scanned images appear. 643
Related Topic Scanning Items Larger than the Platen (Image Stitch) 644
Scanning with Application Software that You are Using (ScanGear) What Is ScanGear (Scanner Driver)? Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (Scanner Driver) Scanning in Basic Mode Scanning in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) ScanGear (Scanner Driver) Screens Placing Items (When Scanning from a Computer) Adjusting Cropping Frames (ScanGear) General Notes (Scanner Driver) Important • Available functions and settings vary depending on your scanner or printer. 645
What Is ScanGear (Scanner Driver)?ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output size and make image corrections when scanning. ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface called TWAIN. (ScanGear is a TWAIN-compatible driver.) What You Can Do with This SoftwareThis software enables you to preview scan results or set document type and output size, etc. whenscanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make various corrections and adjust brightness, contrast, etc. Screens There are two modes: Basic Mode and Advanced Mode. Switch modes by clicking a tab on the upper right of the screen. Note • ScanGear starts in the last used mode. • Settings are not retained when you switch modes. Basic Mode Use the Basic Mode tab to scan easily by following three simple on-screen steps ( , , and ). 646
Advanced ModeUse the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning. 647
Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (Scanner Driver) Scanning in Basic Mode Scanning in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) 648
Starting ScanGear (Scanner Driver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear can be started from IJ Scan Utility or other applications. Note • Set up the network environment if you have more than one scanner or have a network compatible model and changed the connection from USB connection to network connection. Starting IJ Scan Utility Follow these steps to start ScanGear from IJ Scan Utility. 1. Start IJ Scan Utility. Refer to "Starting IJ Scan Utility" for your model from Home of the Online Manual for how to start IJ Scan Utility. 2. Click ScanGear in the IJ Scan Utility main screen. The ScanGear screen appears. Starting from an Application Follow these steps (example) to start ScanGear from an application. The procedure varies depending on the application. For details, refer to the application's manual. 1. Start the application. 2. On the menu of the application, select the machine. Note • When you want to use a network compatible model by connecting to a network, select one with "Network" displayed after the product name. 3. Select the command to scan a document. The ScanGear screen appears. 649
Scanning in Basic ModeUse the Basic Mode tab to scan easily by following the on-screen steps. Refer to " Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple documents at one time from the Platen. When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Important • The following types of documents may not be scanned correctly. In that case, click (Thumbnail) on the Toolbar to switch to whole image view and scan. • Photos that have a whitish background • Documents printed on white paper, hand-written text, business cards, etc. • Thin documents • Thick documents • The following types of documents may not be scanned correctly. • Documents smaller than 1.2 inches (3 cm) square • Photos that have been cut to various shapes Note • When using a model supporting ADF duplex scanning, you can scan both sides of the documents automatically from the ADF. 1. Place the document on the Platen or ADF, then start ScanGear (scanner driver). Placing Items (When Scanning from a Computer) Starting ScanGear (Scanner Driver) 2. Set Select Source according to the document placed on the Platen or ADF. 650