Home > Canon > Printer > Canon Maxify Mb5020 User Guide

Canon Maxify Mb5020 User Guide

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Canon Maxify Mb5020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1140
    Add page 291 to Favourites
    image text
    Enable zoom 
    							Changing and Confirming Network Settings
IJ Network Tool
Changing the Settings in the Wireless LAN Sheet
Changing the WEP Detailed Settings
Changing the WPA/WPA2 Detailed Settings
Changing the Settings in the Wired LAN Sheet
Changing the Settings in the Admin Password Sheet
Monitoring Wireless Network Status
Initializing the Network Settings of the Machine
Viewing the Modified Settings
291
    Add page 292 to Favourites
    image text
    Enable zoom 
    							IJ Network ToolIJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed
when the machine is set up.
Important
•
To use the machine over LAN, make sure you have the equipment necessary for the connection type, such as an access point or a LAN cable.
•
Do not start up IJ Network Tool while printing.
•
Do not print when IJ Network Tool is running.
•
If the firewall function of your security software is turned on, a message may appear warning thatCanon software is attempting to access the network. If the warning message appears, set the security
software to always allow access.
•
IJ Network Tool has been verified to work on Windows XP, however, it does not support Fast User Switching. It is recommended to exit IJ Network Tool when switching users.
Starting up IJ Network Tool
1.
Start up IJ Network Tool as shown below.
•
In Windows 8.1 or Windows 8, select  IJ Network Tool on the Start screen to start IJ Network
Tool. If  IJ Network Tool  is not displayed on the  Start screen, select the  Search charm, then
search for "IJ Network Tool".
•
In Windows 7, Windows Vista, or Windows XP, click  Start and select  All programs , Canon
Utilities , IJ Network Tool , and then IJ Network Tool .
Depending on the printer you are using, an administrator password is already specified for the printer at
the time of purchase. When you change the network settings, authentication by the administrator
password is required.
For details:
About the Administrator Password
For improving security, it is recommended to change the administrator password.
Changing the Settings in the Admin Password Sheet
292
    Add page 293 to Favourites
    image text
    Enable zoom 
    							Changing the Settings in the Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
Note
•
This screen is not available depending on the printer you are using.
•
Activate the wireless LAN setting of the printer to change the settings in the  Wireless LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
The  Wireless LAN  sheet is displayed.
For details on the  Wireless LAN sheet, see Wireless LAN Sheet .
5.
Change the settings or confirm.
SSID: Enter the same value that was set for the target access point.
When the printer is connected with USB, the  Search screen appears by clicking  Search.... Set the
SSID of the access point by selecting the one of the detected access points.
Search Screen
293
    Add page 294 to Favourites
    image text
    Enable zoom 
    							Note•
Enter the same SSID that the access point is configured to use. The SSID is case-sensitive.
Encryption Method: Select the encryption method used over the wireless LAN.
You can change WEP settings with selecting  Use WEP and clicking  Configuration... .
Changing the WEP Detailed Settings
You can change WPA/WPA2 settings with selecting  Use WPA/WPA2 and clicking Configuration... .
Changing the WPA/WPA2 Detailed Settings
Important
•
If all encryption types of the access point, printer, or computer do not match, the printer cannot
communicate with the computer. If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer andthe access point match that set to the printer.
•
If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
TCP/IP Setup: Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your
network environment.
6.
Click  OK.
After changing configuration, a screen is displayed asking you for confirmation before the settings are
sent to the printer. If you click  Yes, the settings are sent to the printer and the  Transmitted Settings
screen is displayed.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
294
    Add page 295 to Favourites
    image text
    Enable zoom 
    							Changing the WEP Detailed Settings
Note
•
This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
5.
Select Use WEP  in Encryption Method:  and click Configuration... .
The  WEP Details  screen is displayed.
6.
Change the settings or confirm.
When changing the password (WEP key), the same change must be made to the password (WEP key)
of the access point.
1.
WEP Key:
Enter the same key as the one set to the access point. The number of characters and character type that can be entered differ depending on the combination of the key length and key format.
 Key Length64bit128bitKey FormatASCII5 characters13 charactersHexadecimal ( Hex
)10 digits26 digits
295
    Add page 296 to Favourites
    image text
    Enable zoom 
    							2.Key Length:
Select either  64bit or 128bit .3.
Key Format:
Select either  ASCII or Hex .
4.
Key ID:
Select the Key ID (index) set to the access point.
5.
Authentication:
Select the authentication method to authenticate the printer's access to the access point. Normally, select  Auto. If you want to specify the method manually, select  Open System or
Shared Key  according to the setting of the access point.
7.
Click OK.
Important
•
If the printer cannot communicate with the computer after the encryption type of the printer was
switched, make sure that encryption types for the computer and the access point match that set to
the printer.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
296
    Add page 297 to Favourites
    image text
    Enable zoom 
    							Changing the WPA/WPA2 Detailed Settings
Note
•
This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
The example screenshots in this section refer to the WPA detailed settings.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
5.
Select Use WPA/WPA2  in Encryption Method:  and click Configuration... .
The  WPA/WPA2 Details  screen is displayed.
If encryption is not set to the printer, the  Authentication Type Confirmation screen is displayed. Go to
step 7.
6.
Click  Change Settings... .
7.
Check the client authentication type and click  Next>.
297
    Add page 298 to Favourites
    image text
    Enable zoom 
    							8.
Enter the passphrase, then click Next>.
Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
characters or a 64-digit hexadecimal value.
If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.
The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
encryption) automatically.
Important
•
If  Auto  is not displayed on  Dynamic Encryption Type: , select either TKIP(Basic Encryption)  or
AES(Secure Encryption) .
9.
Click Finish .
298
    Add page 299 to Favourites
    image text
    Enable zoom 
    							Important
•
If the printer cannot communicate with the computer after the encryption type of the printer wasswitched, make sure that encryption types for the computer and the access point match that set to
the printer.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
299
    Add page 300 to Favourites
    image text
    Enable zoom 
    							Changing the Settings in the Wired LAN Sheet
Note
•
This screen is not available depending on the printer you are using.
•
Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wired LAN  tab.
The  Wired LAN  sheet is displayed.
For details on the  Wired LAN sheet, see Wired LAN Sheet .
5.
Change the settings or confirm.
Set the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
environment.
6.
Click  OK.
After changing configuration, a screen is displayed asking you for confirmation before the settings are
sent to the printer. If you click  Yes, the settings are sent to the printer and the  Transmitted Settings
screen is displayed.
300
    All Canon manuals Comments (0)

    Related Manuals for Canon Maxify Mb5020 User Guide