Canon Maxify Mb5020 User Guide
Have a look at the manual Canon Maxify Mb5020 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
• Specify a scaling factorDirectly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important • When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver. 401
Note• Selecting Scaled changes the printable area of the document.402
Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2. Set page layout printing Select Page Layout from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver. 3. Select the print paper size Select the size of the paper loaded in the printer from the Printer Paper Size list. 4. Set the number of pages to be printed on one sheet and the page order If necessary, click Specify..., specify the following settings in the Page Layout Printing dialog box, and click OK. 403
PagesTo change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order. 404
Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster. The procedure for performing tiling/poster printing is as follows: Setting Tiling/Poster Printing 1. Open the printer driver setup window 2. Set tiling/poster printing Select Tiling/Poster from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the printer driver. 3. Select the print paper size Select the size of the paper loaded in the printer from the Printer Paper Size list. 4. Set the number of image divisions and the pages to be printed 405
If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a larger poster. Print "Cut/Paste" in margins To leave out words "Cut" and "Paste", uncheck this check box. Note • This feature may be unavailable when certain printer drivers or operating environments are used. Print "Cut/Paste" lines in margins To leave out cut lines, uncheck this check box. Print page range Specifies the printing range. Select All under normal circumstances. To reprint only a specific page, select Pages and enter the page number you want to print. To specify multiple pages, enter the page numbers by separating them with commas or by entering a hyphen between the page numbers. Note • You can also specify the print range by clicking the pages in the settings preview. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the document will be divided into several pages during printing. Printing Only Specific Pages If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the procedure below: 1. Set the print range In the settings preview on the left of the Page Setup tab, click the pages that do not need to be printed. The pages that were clicked are deleted, and only the pages to be printed are displayed. 406
Note • Click the deleted pages to display them again. • Right-click the settings preview to select Print all pages or Delete all pages . 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed. Important • Since tiling/poster printing enlarges the document when printing it, the print results may become coarse. 407
Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center. The procedure for performing booklet printing is as follows: 1. Open the printer driver setup window 2. Set booklet printing Select Booklet from the Page Layout list on the Page Setup tab. The current settings are displayed in the settings preview on the left side of the window. 3. Select the print paper size Select the size of the paper loaded in the printer from the Printer Paper Size list. 4. Set the margin for stapling and the margin width Click Specify... and specify the following settings in the Booklet Printing dialog box, and then click OK. 408
Margin for staplingSelect which side should the stapling margin be on when the booklet is completed. Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank. Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width for one page. Page Border To print a page border around each document page, check the check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the document is automatically printed first on one side of a sheet of paper and then on the opposite side. When the printing is complete, fold the paper at the center of the margin and make a booklet. Important • Booklet cannot be selected when a media type other than Plain Paper is selected for Media Type on the Main tab. Note • The stamp and background are not printed on the inserted blank sheets with the Insert blank page function of booklet printing. 409
Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: You can also set duplex printing in Additional Features on the Quick Setup tab. Performing Automatic Duplex Printing You can perform the duplex printing without having to turn over the paper. 1. Open the printer driver setup window 2. Set automatic duplex printingCheck the Duplex Printing check box on the Page Setup tab and confirm that Automatic is checked. 3. Select the layout Select Normal-size , Fit-to-Page , Scaled , or Page Layout from the Page Layout list. 4. Set the print area When you perform duplex printing, the print area of the document becomes slightly narrower than usual and the document may not fit on one page. Click Print Area Setup... , select one of the following process methods, and then click OK. 410