Home
>
Toshiba
>
Communications System
>
Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual
Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual
Have a look at the manual Toshiba Voice Processing Vp100, 300s, 300 Configuration Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 566 Toshiba manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
TRANSLATlONTable 23-l- 23.1UNDERSTANDING THE TRANSLATION TABLE In some installations, the number entered by the caller does not match the called party’s extension number. In these cases, the PBX performs digit translation to convert the digits (number) received into the appropriate internal number. This situation is most commonly encountered when DID service is added to an e&t& system. In these cases it is possible that the available numbers could not be matched with the existing numbering scheme for the hundreds or thousands of digits used as a first digit for extension numbers. The TRANSLATION 72ble contains the first 1 to 4 digits of the CO DID number (represented as “digits absorbed”), and the first 1 to 4 digits of the mailbox number (represented as “digits inserted”).. All TRANSLATION T&bles in a multi-cabinet installation must be identical to each other and the PBX. ,_e: i TcdVba W Syxtembsdezae5.3 May. lee1
23-2 Configuration Marwal- 23.2HOW THE TRANSLATION TABLE IS USED The TFtANSI.ATION Table may be required in Adaptive Integration installations where it is necessq to accommodate extension numtxxs that begin with “0.” If multiple prefpes arc: used in the same instalbtion, lamp message waiting notikation may not be supported.Contact your technical support center for details. Toshiba w s)ntorrawbaM5.3 May. 1891
23.3HOW TO CONFIGURE THE TRANSLATION TABLE The first one to four digits of the extension number received are translated.They may translate to1,2,3,or4digits(NONEmayalsobeused). Number sent by tbe COIf TRANSLU”ION Table isResulting Mail&x number is: configured to: 446Tkanslate4 into 3346 446 Translate4 into 333346 446Translate44 into 33336 446Translate4 into NONE 46 Each Toshiba VP System cabinet in a multi-cabinet installation must have the same digit TFWNSlJil’lON Table. The table must match the table in the PBX. IL.rA system restart must he performed each and every time the configuration is modified. Also, the Interface Module(s) must be restarted every time the system parameter or-BUS lNFORM.ATlON Table are changed. A system restart takes approximately one to ten minutes to complete n Using UPDATE Use the UPDATE program to:l LIST l ADD l DELETE l MODIFY cannot be used on the TRANSLATION Table. LISTListing the TRANSLATION Table ADDAdding digits to the TRANSLATION Table type ATRAN?