Panasonic Kx Tva50 Programming Manual
Have a look at the manual Panasonic Kx Tva50 Programming Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2.5 System Parameters Programming Manual 171 Va l u e R a n g e Max. 32 digits Intercom Paging Parameters VPS Intercom Paging functions in conjunction with the Intercom Paging feature of the PBX. It allows the VPS to page the called party (announce the callers name, line number, etc.) while the caller is placed on hold. To utilize this feature, Intercom Paging must be available for the PBX, and the VPS must be properly programmed. This feature is available for APT/DPT Integration only. Intercom Paging Sequence Specifies the intercom paging sequence used to activate the Intercom Paging feature of the PBX. The settings made here must match the settings of the PBX. The sequence can be a combination of 7 letters and 12 dial codes. Default FX, Va l u e R a n g e Max. 16 digits consisting of 0–9, , # and special codes D: Disconnecting F: Hook Flash R: Ringback Tone Detection
2.5 System Parameters 172 Programming Manual T: Dial Tone Detection ,: Dial Pause for 1 s (default) ;: Dial Pause for 3 s (default) X: Pager Dialing 0–9, , #: Dial Codes Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only) Release for Intercom Paging Specifies the intercom paging release sequence. The settings made here must match the settings of the PBX. The sequence can be a combination of 7 letters and 12 dial codes. Default F, Va l u e R a n g e Max. 16 digits consisting of 0–9, , # and special codes D: Disconnecting F: Hook Flash R: Ringback Tone Detection T: Dial Tone Detection ,: Dial Pause for 1 s (default) ;: Dial Pause for 3 s (default) X: Pager Dialing 0–9, , #: Dial Codes Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only) No Answer Time for Intercom Paging Specifies the length of time (in seconds) the VPS waits before concluding Intercom Paging when there is no answer. The VPS will return to the caller if the paged party does not respond before this timer expires. Default 5 s Va l u e R a n g e 1 s–30 s Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only)
2.5 System Parameters Programming Manual 173 Announcement Repeat Cycle Specifies the number of times the VPS announces the page. Example: I have a call for (subscribers name). Default 1 Va l u e R a n g e 1–3 times Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only) Intercom Paging Retry Specifies the number of times to retry paging when the called subscriber has set Incomplete Call Handling to Intercom Paging and the subscriber is busy or if there is no answer. Note This setting applies only when the subscriber has enabled Intercom Paging in Incomplete Call Handling Status. Default 2 Va l u e R a n g e 1–10 times Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only) Caller Recorded Name Announcement Mode Determines whether or not the VPS announces the callers name during paging. (In order for the name to be announced, it must be recorded beforehand.) Default Disable Va l u e R a n g e Disable, Enable Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only)
2.5 System Parameters 174 Programming Manual Paging Code Specifies the intercom paging code. The settings made here must match the settings of the PBX. Note Each subscribers Intercom Paging Group Number is determined based on his or her COS. Default All groups: None Selective (Paging Code for Group 1-32): 33 + Group No. Va l u e R a n g e Max. 16 digits consisting of 0–9, , # for all/each group Feature Manual References 2.2.25 Intercom Paging (APT/DPT Integration Only) Fax Management You can program the VPS to automatically detect incoming fax calls and forward those calls to a fax extension. You can specify a maximum of 2 fax extensions as the destination for faxes; if the main fax extension is not available to receive a fax, the VPS will forward the fax call to the alternate fax extension.
2.5 System Parameters Programming Manual 175 Automatic Transfer of Incoming Fax Call Enables or disables the detection of incoming fax calls. Note The VPS can detect incoming fax signals during the first 30 seconds after it answers incoming calls. Default Disable Va l u e R a n g e Disable, Enable Feature Manual References 2.2.22 Fax Management Main Fax Extension No. Specifies the extension number of the main fax machine. Default None Va l u e R a n g e 2–5 digits Feature Manual References 2.2.22 Fax Management Alternate Fax Extension No. Specifies the extension number of the alternate fax machine. When the main fax extension is busy or does not answer within the time specified under Fax No Answer Time, the VPS forwards the fax call to the alternate fax extension. Default None Va l u e R a n g e 2–5 digits Feature Manual References 2.2.22 Fax Management Fax No Answer Time Specifies the length of time (in seconds) that the VPS waits for the main or alternate fax extension to answer a fax call before taking other action, such as notifying the Fax Manager that the fax could not be received.
2.5 System Parameters 176 Programming Manual Default 10 s Va l u e R a n g e 5 s–60 s Feature Manual References 2.2.22 Fax Management Fax Manager Mailbox No. Specifies the mailbox number of the Fax Manager. The VPS will notify the Fax Manager of the status of fax calls depending upon the settings of the Fax No Answer Coverage Mode and Fax Notification Mode parameters. Default None Va l u e R a n g e 2–5 digits Feature Manual References 2.2.22 Fax Management Fax No Answer Coverage Mode Determines what action the VPS takes when an incoming fax call could not be answered by the main or alternate fax extension. The VPS can announce to the Fax Manager the number of unanswered fax calls. The number announced is the number of unanswered fax calls since the last time the VPS notified the Fax Manager. This announcement is heard when the Fax Manager logs in to his or her mailbox. Default No Va l u e R a n g e No: The VPS will not notify the Fax Manager when fax calls were not answered. Mbx: The VPS will announce the number of unanswered fax calls to the Fax Manager when the Fax Manager logs in to his or her mailbox. Extn: The VPS will announce the number of unanswered fax calls to the Fax Manager by calling the Fax Managers extension. Feature Manual References 2.2.22 Fax Management Fax Notification Mode Determines what action the VPS takes when an incoming fax call is successfully received by the main or alternate fax extension. The VPS can announce to the Fax Manager the number of received fax
2.5 System Parameters Programming Manual 177 calls. The number announced is the number of received fax calls since the last time the VPS notified the Fax Manager. Default No Va l u e R a n g e No: The VPS will not notify the Fax Manager when fax calls are answered. Mbx: The VPS will announce the number of successfully received fax calls to the Fax Manager when the Fax Manager logs in to his or her mailbox. Extn: The VPS will announce the number of successfully received fax calls to the Fax Manager by calling the Fax Managers extension. Feature Manual References 2.2.22 Fax Management Disconnect Parameters Maximum Silence Time Specifies the length of silence detected by the VPS before the VPS disconnects the call. Default 10 s
2.5 System Parameters 178 Programming Manual Va l u e R a n g e 0 s–60 s Maximum Continuous Tone Time Specifies the length of time the VPS waits when a continuous tone is detected before it disconnects the call. Default 6 s Va l u e R a n g e 0 s–60 s Maximum Cyclic Tone Time Specifies the length of time the VPS waits when a cyclic tone is detected before it disconnects the call. Default 6 s Va l u e R a n g e 0 s–60 s Maximum Call Duration Specifies the maximum duration of calls. If the VPS detects no DTMF signals for the specified amount of time, it terminates the call. Calls will not be terminated while playing or recording messages. If this setting is set to 0, calls will not be terminated. Default 10 min Va l u e R a n g e 0 min–60 min Transfer to Outside These parameters determine how the VPS will transfer calls to trunk (CO line) via the following features: Call Transfer Service, Custom Service, Personal Custom Service, Caller ID Callback.
2.5 System Parameters Programming Manual 179 Outside Transfer Sequence Call Transfer to Outside Sequence Specifies the sequence the VPS uses to transfer calls to trunks (CO lines). Default FND Va l u e R a n g e Max. 16 digits consisting of 0–9, , # and special codes D: Disconnecting F: Hook Flash R: Ringback Tone Detection T: Dial Tone Detection ,: Dial Pause for 1 s (default) ;: Dial Pause for 3 s (default) N: Telephone Number Dialing 0–9, , #: Dial Codes Feature Manual References 2.2.7 Call Transfer to Outside
2.5 System Parameters 180 Programming Manual Call Transfer to Outside Reconnect Sequence on Busy Specifies the sequence the VPS uses to reconnect the line when the transferred party is busy. Default F Va l u e R a n g e Max. 16 digits consisting of 0–9, , # and special codes D: Disconnecting F: Hook Flash R: Ringback Tone Detection T: Dial Tone Detection ,: Dial Pause for 1 s (default) ;: Dial Pause for 3 s (default) N: Telephone Number Dialing 0–9, , #: Dial Codes Feature Manual References 2.2.7 Call Transfer to Outside Call Transfer to Outside Reconnect Sequence on No Answer Specifies the sequence the VPS uses to reconnect the line when the transferred party does not answer. Default F Va l u e R a n g e Max. 16 digits consisting of 0–9, , # and special codes D: Disconnecting F: Hook Flash R: Ringback Tone Detection T: Dial Tone Detection ,: Dial Pause for 1 s (default) ;: Dial Pause for 3 s (default) N: Telephone Number Dialing 0–9, , #: Dial Codes Feature Manual References 2.2.7 Call Transfer to Outside EFA Transfer Sequence Specifies the sequence the VPS uses to transfer calls to trunks (CO lines) using EFA (External Feature Access). This setting should match the setting of the PBX.