Panasonic Kx Tva50 Programming Manual

KX-TVA50
 Model    KX-TVA200
Thank you for purchasing a Panasonic Voice Processing System.
Please read this manual carefully before using this product and save this manual for future use.
KX-TVA50/KX-TVA200: Version  1.1
Voice Processing System
Programming Manual 

2 Programming Manual
Introduction
About this Manual
This Programming Manual is designed to serve as an overall reference for programming the 
Panasonic Voice Processing System using KX-TVA Maintenance Console. It explains how to use KX-
TVA Maintenance Console, and obtain the most out of system administration. 
The Programming Manual is divided into the following sections:
Section 1, Programming Instructions
Describes how to install, start, and operate KX-TVA Maintenance Console.
Section 2, KX-TVA...

Programming Manual 3
 Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries 
in the United States and other countries.
 All other trademarks identified herein are the property of their respective owners.
 Screen shots reprinted with permission from Microsoft Corporation. 

4 Programming Manual
Table of Contents
1 Programming Instructions ..................................................................... 7
1.1 Introduction ...................................................................................................................... 8
1.1.1 System Administration ....................................................................................................... 8
1.1.2 Password...

Programming Manual 5
1.8.6 Utility—System Maintenance ........................................................................................... 31
1.8.7 Utility—System Initialize/Restart ...................................................................................... 32
1.8.8 Utility—Diagnostic ............................................................................................................ 33
1.8.9 Utility—Programmer Code...

6 Programming Manual
2.7.13 E-mail Report ................................................................................................................. 213
2.8 System Security ........................................................................................................... 214
2.8.1 Administrator .................................................................................................................. 214
2.8.2 Subscriber...

Programming Manual 7
Section 1
Programming Instructions
This section describes how to install, start, and operate KX-
TVA Maintenance Console. 

1.1 Introduction
8 Programming Manual
1.1 Introduction
1.1.1 System Administration
VPS programming can be performed by the System Administrator, System Manager, and Message 
Manager. The type of programming performed by each is very different. While the System Manager 
and Message Manager can use their telephones to program the PBX, the System Administrator must 
use KX-TVA Maintenance Console and a PC. 
VPS programming performed by the System Administrator is referred to as system administration. 
–...

1.2 Installing and Starting KX-TVA Maintenance Console
Programming Manual 9
1.2 Installing and Starting KX-TVA Maintenance 
Console
1.2.1 Installing KX-TVA Maintenance Console
System programming, diagnosis, and data upload/download can be performed with a PC using the 
KX-TVA Maintenance Console software.
This section briefly describes how to install and start KX-TVA Maintenance Console on a PC that is 
connected to the VPS via USB.
System Requirements
Required Operating System
 Microsoft  Windows  98...

1.2 Installing and Starting KX-TVA Maintenance Console
10 Programming Manual
Note
 Before installing or uninstalling the driver, be sure to close any open applications.
Windows 98SE
1.Connect the PC to the PBX with a USB cable. 
The Add New Hardware Wizard will appear.
2.Click Next.
3.Select Search for the best driver for your device. [Recommended], then click Next.
4.Select Specify a location, then click Browse.
5.Specify the folder containing the USB driver, CD-ROM Drive:\USB driver\Win98, then click...