Panasonic Kx Tva50 Programming Manual

1.2 Installing and Starting KX-TVA Maintenance Console
Programming Manual 11
1.Connect the PC to the PBX with a USB cable. 
The Found New Hardware Wizard will appear.
2.Select Install from a list or specific location [Advanced], then click Next.
3.Select Search for the best driver in these locations.
4.Select Include this location in the search:, then click Browse.
5.Specify the folder containing the USB driver, CD-ROM Drive:\USB driver\WinXP, then click OK.
6.Click Next.
7.Click Continue Anyway.
8.Click...

1.2 Installing and Starting KX-TVA Maintenance Console
12 Programming Manual
1.2.2 Starting KX-TVA Maintenance Console
Note
 The screenshots shown here are for reference only, and may differ from the screens 
displayed on your PC.
1.Click the KX-TVA Maintenance Console shortcut 
icon. Its icon is shown here, on the left.
2.Select the appropriate VPS model and click OK.
3.The Enter Programmer Code dialog box is 
displayed. Enter the programmer code (default: 
INSTALLER) and click OK.
Note
 The...

1.2 Installing and Starting KX-TVA Maintenance Console
Programming Manual 13
5.The main window is displayed.
6.Click Connect → USB from the menu bar, or click 
Connect on the toolbar, select USB in the 
Connection Mode dialog box and click Next.
Note
 To connect to the VPS via USB, the KX-
TVA USB driver must be installed on the 
PC, as explained above in Installing KX-
TVA Maintenance Console.
7.Enter the administrator password (default: 1234), 
then click Next.
Note
 The administrator password is...

1.2 Installing and Starting KX-TVA Maintenance Console
14 Programming Manual
Note
 If starting KX-TVA Maintenance Console for the first time, use the Quick Setup utility to set 
the administrators password and other basic parameters (see 1.8.1 Utility—Quick Setup).
 KX-TVA Maintenance Console supports versions 1.0 and 1.1 of the KX-TVA50 and KX-
TVA200. The software performs according to the version number of the connected VPS.
 Software features, design, and system requirements are subject to...

1.3 File
Programming Manual 15
1.3 File
The File menu allows you to create, open or save a data file. If New or Open are selected, KX-TVA 
Maintenance Console automatically enters Batch mode.
1.3.1 File—New
Creates a new system data file, and puts KX-TVA Maintenance Console in Batch mode. All settings 
are in their initial or default state. To upload the file created  here to the VPS, see 1.8.2 Utility—
System Back Up.
Note
 Since selecting this op tion creates a new system data file, uploading this new...

1.3 File
16 Programming Manual
1.3.3 File—Close
Closes currently opened system data files, and enters Initial mode. This menu is only available 
when using the KX-TVA Maintenance Console in Batch mode.
To Enter Initial mode
 From the File menu, select Close.
If the system data file being modified has not been saved, a warning message will be displayed, 
giving you the option to save the file.
a)Click Ye s to save the file and close system data files to enter the Initial Mode.
b)Click No to discard the...

1.3 File
Programming Manual 17
a)Click Ye s to save the file and exit KX-TVA Maintenance Console.
b)Click No to discard the changes and exit KX-TVA Maintenance Console. 

1.4 Connect
18 Programming Manual
1.4 Connect
The Connect menu allows you to directly program the VPS in Interactive mode. When connecting, 
you are required to enter the password corresponding to the administrator password entered when 
starting KX-TVA Maintenance Console.
1.4.1 Connect—USB
Connects to the VPS through the USB port on the VPS.
To connect using USB
1.From the Connect menu, select USB.
2.Enter the administrator password used to log on to KX-TVA Maintenance Console.
3.Click Next, and Finish...

1.4 Connect
Programming Manual 19
To connect using a modem
1.From the Connect menu, select Dial-up (Modem).
2.Enter the administrator password and the settings as required.
3.Click Next, and Finish when the connection is completed.
1.4.4 Connect—Disconnect
Closes the connection between KX-TVA Maintenance Console and the VPS.
To disconnect
1.From the Connect menu, select Disconnect.
2.Click Ye s. Password – Enter the password used to log on to KX-
TVA Maintenance Console. Setting Values Description 

1.5 Edit
20 Programming Manual
1.5 Edit
The Edit menu allows you to easily edit data in KX-TVA Maintenance Console.
1.5.1 Edit—Undo
Returns the last changed setting to its previous value.
To undo
 From the Edit menu, select Undo.
1.5.2 Edit—Cut
Cuts the selection and places it in the clipboard. 
To  c u t
 Select an area of text.
 From the Edit menu, select Cut.
1.5.3 Edit—Copy
Copies the selection and places it in the clipboard.
To  c o p y
 Select an area of text.
 From the Edit menu, select...