Panasonic Kx Tva50 Programming Manual
Here you can view all the pages of manual Panasonic Kx Tva50 Programming Manual. The Panasonic manuals for System are available online for free. You can easily download all the documents as PDF.
Page 41
2.1 Mailbox Settings Programming Manual 41 3.Click Copy.
Page 42
2.1 Mailbox Settings 42 Programming Manual 2.1.2 Default Mailbox Template The default mailbox template is applied to new mailboxes when they are created with the Add Range... button. This allows you to create similar mailboxes easily, with one command. Follow the steps below to edit the default mailbox: 1.Click Add Range…. 2.Specify a range of mailbox (From:/To:). (Check Use the same number for Mailbox and Extension as your needs.) 3.Enter the number of mailboxes to create in the Number of Mailboxes....
Page 43
2.1 Mailbox Settings Programming Manual 43 7.Click OK. Feature Manual References 2.4.3 Default Mailbox Template
Page 44
2.1 Mailbox Settings 44 Programming Manual 2.1.3 Mailbox Parameters Each mailbox can be edited based upon the needs of the subscriber. Mailbox Number Specifies the subscribers mailbox number. Mailbox number length is set by using the Set Default Parameters utility or when Initialize System is selected. Mailbox numbers cannot begin with 0. If the length of the mailbox number has been defined as 4 digits, for example, the valid range for all mailbox numbers would be 1000 through 9997 (9998 and 9999...
Page 45
2.1 Mailbox Settings Programming Manual 45 Feature Manual References 2.3.16 Mailbox Extension Specifies the extension number of the mailboxs subscriber. Any valid extension number including an Extension Group List number can be assigned. Note If an Extension Group List number is assigned to a mailbox, all group members are able to share the information stored in the mailbox. Default None Va l u e R a n g e 2–5 digits Feature Manual References 2.3.16 Mailbox First Name Specifies the first name of the...
Page 46
2.1 Mailbox Settings 46 Programming Manual Va l u e R a n g e Max. 20 characters (\, ^, ` and ˜ cannot be used.) Programming Manual References Directory Listing in 2.2.2 Personal Options Feature Manual References 2.2.18 Dialing by Name Password Specifies the password needed to access the mailbox. If a default password is programmed by the System Administrator, that password will be assigned automatically when creating all mailboxes. The System Administrator can change and delete the password. Follow...
Page 47
2.1 Mailbox Settings Programming Manual 47 b)Click Ye s when the warning is displayed, then click OK to close the Mailbox Parameters window. Note Each subscriber can change his or her mailbox password. Default None Va l u e R a n g e Max. 16 digits Programming Manual References 2.8.2 Subscriber Subscribers Manual References 2.4 Changing Your Password Class of Service Determines the set of services available to the subscriber. Note We recommend that parameters for each COS number be defined before...
Page 48
2.1 Mailbox Settings 48 Programming Manual Default None Va l u e R a n g e 2–5 digits Feature Manual References 2.2.15 Covering Extension Subscribers Manual References 5.3 Assigning Your Covering Extension Interview Mailbox Assigns an interview mailbox to the subscribers mailbox. In order for it to function properly, the interview mailbox number must not be the same number as an existing mailbox and an existing mailbox group. Note Each callers replies to an interview session are saved as one...
Page 49
2.1 Mailbox Settings Programming Manual 49 Feature Manual References 2.2.3 Automated Attendant Call Transfer Sequence Specifies the Call Transfer Sequence used by the mailbox. Allows each mailbox to be assigned its own Call Transfer Sequence (Personal Transfer Sequence). Note When System is selected, the VPS follows the Extension Transfer Sequence preprogrammed for the VPS in the System Parameters→Parameters→PBX Parameters→PBX Environment. This sequence has higher priority than Alternate...
Page 50
2.1 Mailbox Settings 50 Programming Manual Va l u e R a n g e System, 10 s – 60 s Programming Manual References Call Transfer No Answer Time in 2.5.4 Parameters Call Transfer Status Determines how the VPS handles a call when it reaches the subscribers extension. Note This setting can be changed by subscribers. Default None Va l u e R a n g e Select: None: rings the subscribers extension Call blocking: connects the caller to the Incomplete Call Handling for No Answer without ringing the subscribers...