Panasonic Kx Tva50 Programming Manual

1.8 Utility
Programming Manual 31
– Process Event: events occurred between the VPS processes such as Application, Call 
Processor and DSP.
– Caller ID: Caller ID received from the PBX.
– Error: system errors.
– DID: DID number received from the connected PBX.
– PIN: PIN received by the VPS.
There are 2 methods for System Trace.
a)Real Time Trace: monitors the trace data of the selected port. Also, it is possible to log the 
monitoring data as a file.
b)Internal Trace: logs the trace data of the selected...

1.8 Utility
32 Programming Manual
System Maintenance Mode
Specifies whether to enable or disable System Maintenance Mode.
Default
Enable
Va l u e  R a n g e
Disable, Enable
System Maintenance Start Time
Specifies the System Maintenance start time.
Default
01:00
Va l u e  R a n g e
HH:MM (HH: Hour, MM: Minute)
HDD Auto Stand-by Mode
Specifies whether to enable or disable HDD Auto Stand-by Mode. This option is only available when 
the connected VPS is a KX-TVA200.
Default
Enable
Va l u e  R a n g e...

1.8 Utility
Programming Manual 33
a)Initialize System: clears all voice data except the installed system guidance, and returns all 
system parameters to their default settings. The System Administrator has to specify the 
following parameters before initializing the system:
– Mailbox No. Length
– System Managers Mailbox No.
– Message Managers Mailbox No.
b)Restart System: restarts the system. The VPS is not initialized. 
Follow the steps below to initialize or restart the VPS:
1.Click Utility in the menu...

1.8 Utility
34 Programming Manual
1.8.9 Utility—Programmer Code
The System Administrator can change the programmer code that is needed to use KX-TVA 
Maintenance Console.
Follow the steps below to change the programmer code:
1.Click Utility in the menu bar.
2.Select Programmer Code.
3.If the programmer code is already set, enter the old programmer code in Enter old programmer 
code:. 
4.Enter a new programmer code in Enter new programmer code:.
5.Enter the new programmer code in Confirm new programmer...

1.8 Utility
Programming Manual 35
Obtain an IP address automatically
Check this item to have the VPS obtain an IP address automatically from the local networks DHCP 
server.
Default
Not checked
Use the following IP address
Check this item if you want to assign a specific IP address, subnet mask, and default gateway to the 
VPS.
Default
Checked
IP Address
Specifies the IP Address for VPS. You can program this setting only if Use the following IP address: 
is selected.
Default
192.168.1.11
Subnet Mask...

1.8 Utility
36 Programming Manual
Use the following DNS server addresses
Check this item if you want the VPS to use a specific DNS server. Up to 2 servers can be assigned.
Default
Not checked
Preferred DNS Server
Specifies the Preferred DNS Server.
Default
None
Alternate DNS Server
Specifies the Alternate DNS Server.
Default
None
Por t No.
Specifies the Port No. for VPS.
Default
10000
Va l u e  R a n g e
1–65535
1.8.12 Utility—Default Parameters
Specifies TVA Type, Mailbox No. Length, System Managers...

Programming Manual 37
Section 2
KX-TVA Maintenance Console Operating
Instructions
This section describes how to program the VPS using the KX-
TVA Maintenance Console software. 

2.1 Mailbox Settings
38 Programming Manual
2.1 Mailbox Settings
A maximum of 62 (KX-TVA50) or 1022 (KX-TVA200) subscriber mailboxes can be created. Although 
the System Manager can use a telephone to create or edit mailboxes, the System Administrator can 
create several mailboxes at once using KX-TVA Maintenance Console.
Mailbox parameters are divided into the following categories:
– Mailbox Parameters
– Notification Parameters
– External Message Delivery settings
– Auto Forwarding settings
– Personal...

2.1 Mailbox Settings
Programming Manual 39
2.1.1 Mailbox Settings Screen
This screen allows the System Administrator to visually browse and edit all mailboxes in the VPS. 
There are 2 types of screen: Edit Mailbox and the list of mailboxes.
Edit Mailbox Screen
When you click Mailbox Settings, you can edit the details of the mailbox that is displayed. The lowest 
numbered mailbox, or the Message Managers mailbox if there are no other mailboxes created, is 
displayed.
When you click Manage All Mailboxes In...

2.1 Mailbox Settings
40 Programming Manual
List of all mailboxes
This screen provides a list of all mailboxes. From this screen you can add new mailboxes, edit 
mailboxes, delete existing mailboxes, and copy mailbox settings to other mailboxes. Mailboxes can 
be sorted in ascending or descending order by parameter (mailbox number, first name, last name, 
etc.) by clicking the parameter name.
When you click Add Mailbox... or Edit Mailbox, Edit Mailbox screen is displayed.
[Adding a Mailbox]
1.Click Add...