OKI C7350DTN User Manual
Have a look at the manual OKI C7350DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C7350/7550 User’s Guide: Accessories • 541 To insert the memory modules into the slots: 4.Push out the white tabs at either end of the socket. 5.Lift out the board. ugc9_072.jpg 6.Align the module with the narrow strip (1) on its metallic contact edge to the right (toward the slot identifier numbers) of the control board. ugc7_123.jpg CAUTION! If you are installing three 256 MB modules (the maximum amount of memory), the memory modules that were originally installed must be removed. The printer may not operate correctly if the modules are not firmly seated. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 542 7.Carefully insert the module in the socket, placing the ends into the slot in the lock tabs. Press down firmly, until you feel the board engage the connector, then make sure the white tabs come up to lock the module in place. ugc9_073.jpg Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 543 8.Replace the main board and secure it with the two screws. 9.Connect the printer interface cable and power cable. 10.Turn on the printer. NOTE SERVICE CALL/034 may appear on the printer’s display. If it does: 1. Turn off the printer. 2 Remove the main board. 3 Make sure the memory modules are correctly installed. 4 Replace the main board. 5 Turn on the printer. 6If SERVICE CALL/034 appears, repeat the above steps. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 544 7.Print a MenuMap. To print the MenuMap: a.Press MENU twice. INFORMATION MENU displays. b.Press SELECT. PRINT MENU MAP displays. c.Press SELECT. The Menu Map prints. 8.Check the Total Memory Size (shown at the top of the MenuMap). It should match the memory now installed in the printer. If it doesn’t: a.Turn the printer off. b.Remove the main board. c.Make sure that all of the modules are firmly seated in their connectors. For Windows only: 9.In the printer driver(s), change the installed memory to match the new value: – For Windows XP: see page 111 – For Windows 2000: see page 205 – For Windows Me / 98 / 95: see page 302 – For Windows NT 4.0: see page 390 Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 545 Hard Disk Drive The optional internal hard disk drive is used to store documents for: •proof and print •password or secure printing Installation 1.Turn off the printer. 2.Disconnect the power cable and printer interface cable. 3.Loosen the two screws (1) and remove the main board. mother board remove.eps Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 546 4.Hold the hard disk drive by the locking handle (1). 5.Insert the handle locating lugs (2) and four locating feet (3) into the holes in the main board making sure the hard disk connector (4) starts to engage with the socket on the control board. 6.Gently push down on the locking handle (1) making sure the hard disk moves forward and fully engages with the socket. hard disk install.eps 7.Replace the main board and secure it with the two screws. 8.Connect the printer interface cable and power cable. 9.Turn on the printer. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 547 10.Print a MenuMap. To print the MenuMap: a.Press MENU twice. INFORMATION MENU displays. b.Press SELECT. PRINT MENU MAP displays. c.Press SELECT. The Menu Map prints. 11.Check that the HDD appears at the top of the MenuMap. If it doesn’t, a.Turn the printer off b.Remove the main board c.Reseat the hard disk drive. d.Turn on the printer e.Print the MenuMap. 12.After installing the hard disk drive, the printer automatically initializes to include the option. For Windows only: 13.In the printer driver(s), change the installed memory to match the new value: – For Windows XP: see page 112 – For Windows 2000: see page 206 – For Windows Me / 98 / 95 (PostScript driver only): see page 304 – For Windows NT 4.0: see page 391 NOTE • When initializing the hard disk, any fonts, overlays or print jobs that have been acknowledged are erased. • The Storage Device Manager can also be used to initialize the hard disk after installation. Please refer to the User Guide for the Storage Device Manager. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 548 Hard Disk Drive Initialize Automatically After the hard disk drive is installed, the printer automatically initializes (configures) to include this option. You can also manually initialize the HDD. Initialize Manually 1.Press MENU until DISK MAINTENANCE displays. 2.Press SELECT. 3.Press ITEM (either + or –) until HDD INITIALIZE displays. 4.Press the SELECT button. 5.Press the ITEM button to shut down the printer. 6.Turn on the printer. The printer has to be turned off and on again to initialize the hard disk before use. NOTE • When initializing the hard disk, any fonts, overlays or print jobs that have been stored are erased. • You can also use Storage Device Manager to initialize the hard disk. For more information, please refer to the User Guide for the Storage Device Manager. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 549 Duplex Unit Installation 1.Turn off the printer. 2. Disconnect the power cable. duplex install.eps 3.Open the front cover (1). 4.Insert the duplex unit (2) into the printer. Engage the sides of the duplex unit in the slots in the printer. 5.Gently slide the duplex unit (2) fully into the printer. 6.Close the front cover (1). 7.Connect the power cable 8.Turn on the printer. 9.The printer automatically configures to include this option. For Windows only: 10.In the printer driver(s), change the installed memory to match the new value: – For Windows XP: see page 116 – For Windows 2000: see page 210 – For Windows Me / 98 / 95 (PostScript driver only): see page 306 – For Windows NT 4.0: see page 395 Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Accessories • 550 Paper Trays Two additional paper trays can be installed. When combined with the standard paper tray, paper capacity increases to approximately 1590 sheets. Installation 1.Turn off the printer. 2.Disconnect the power cable and printer interface cable. WARNING! The printer weighs 106 lbs. (48 kg). 2 people are required to lift the printer safely and prevent any personal injury. NOTE If installing both additional paper trays: Put the two additional paper trays together as one unit first. Then install the printer on top of the two additional paper trays. Downloaded From ManualsPrinter.com Manuals