OKI C7350DTN User Manual
Have a look at the manual OKI C7350DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 471 6.Note the name that the file is assigned in the Storage Device Manager. Names are case sensitive. 7.Make sure the printer being used is highlighted in the lower window of the Storage Device Manager. 8.Select the Project menu. Choose Send Project Files to Printer. This downloads the file to the printer. If the file was downloaded successfully, Command Issued displays. 9.Close the Storage Device Manager. NOTE The assigned file name is very important! You must use this ID number or name when creating overlays in the printer driver. You should change the ID number or name from the default value. Note the new name for later use. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 472 Overlays Defining Overlays PostScript 1.Click Start → Settings → Printers. 2.RIght click the printer name. Click Document Defaults. 3.On the Job Options tab, click the Overlay button. C93_NT_PS_Overlay1.bmp Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 473 4.Click the New button. C93_Me_PS_Overlay2.bmp 5.In the Overlay Name list, enter the file name of the overlay. Select the pages where you want the overlay to print. NOTE The Overlay Name must be EXACTLY the same as the file name you noted in the previous section. This is the name under which the file is stored on the printers’ hard disk drive. It is case sensitive. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 474 6.Under Form setting, in the drop-down list, enter or select a form name. Click Add. C93_Me_PS_Overlay3.bmp 7.Click OK. 8.To continue to add files to the overlay (if required), repeat steps 5 through 8. NOTE The Form Name is a random name of your selection. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 475 9.Under Defined Overlay, highlight the overlay name(s). Click Add to add the overlay(s) to the list under Active Overlay. To select more than one overlay, hold the CTRL key while clicking on each name. C93_NT_PS_Overlay2.bmp 10.At the top of the dialog box, use the drop-down list to select Use Overlay. Click OK. 11.Click OK to close the Default dialog box. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 476 Overlays Defining Overlays PCL 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click Document Defaults. 3.Click the Job Options tab. 4.Click the Overlay... button. pcl job options overlay.bmp Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 477 5.To define an overlay, click the Define Overlays button. C93_NT_PCL_Overlay1.bmp 6.In the Overlay Name list, enter the file name of the overlay 7.In ID Values, enter the ID of the file. Please refer to the instructions for the Storage Device Manager utility. 8.Select which pages the overlay is to be printed on from Print on Pages or use Custom Pages to select specific page numbers in the document. Click Add. 9.Click Close. 10.Repeat steps 5 though 9 for each overlay you wish to add. 11.Under Defined Overlay, highlight the overlay name. Click the Add button to add the overlay to the list in Active Overlays. NOTE The Overlay Name must be EXACTLY the same as the file name you noted in the previous section. This is the name under which the file is stored on the printer’s hard disk drive. It is case sensitive. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 478 12.Select Print Using Active Overlays. C93_NT_PCL_Overlay2.bmp 13.Click OK. 14.Click OK to close the Default dialog box. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 479 Printing Posters PCL Only This option allows you to configure and print posters by breaking up the document page into multiple pieces. Each piece prints, enlarged, on a separate sheet. Then, the separate sheets are combined to produce a poster. It is only available with the PCL printer driver. 1.Open the file in your application. Select File → Print. 2.In the Print dialog box, click the appropriate PCL driver. Click Properties (or Setup, or your application’s equivalent). 3.On the Setup tab, under Finishing Mode, select Poster Print. C73_NT_PCL_PosterK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT 4.0 Operation • 480 4.Click Options... and enter the configuration details. 5.Click OK twice. 6.Print the document. C93_Me_PCL_Poster2.bmp Downloaded From ManualsPrinter.com Manuals